Clinical management of vital and non-vital discolored tooth preparation stump shades: A clinical case series.

OBJECTIVE: Traditional and modern-day laboratory techniques can be used to mask vital and non-vital discolored teeth. CLINICAL CONSIDERATIONS: Two clinical case reports are presented showing different treatment approaches to differing clinical scenarios of partial coverage veneer and full coverage crown restorations, respectively. CONCLUSIONS: Feldspathic ceramics should be considered when customization of stump shade correction and equalization is required with minimum facial reduction with veneer restorations. Translucent zirconia (5 mol% Y2 O3 ) can be used to mask metal posts and core restorations on non-vital teeth using an opaquer material that is infused into the intaglio surface in the green state. CLINICAL SIGNIFICANCE: Different clinical scenarios will present to the clinician in regard to discolored stump shades where understanding what laboratory material treatment options are available that will help guide definitive restoration types and ultimately tooth preparation design.

Contemporary concepts on periodontal complications from prosthetic and restorative therapies.

The clinical outcome of every prosthetic and restorative procedure depends on the maintenance of a healthy periodontium. It is, therefore, important that the prosthodontist and restorative dentist cause no harm or permanent damage to the underlying hard and soft tissues when performing clinical procedures necessary to carry out the planned treatment. Several factors involved in these procedures have been described to have an impact on gingival health. For the present article, a selection of four of these factors are presented with the goal of evaluating the current trends and their influence on periodontal structures: (1) tooth preparation configuration and apical extension, (2) gingival tissue sulcular expansion/retraction, (3) prosthetic contours, and (4) prosthesis marginal adaptation and the consequences of excess cement remnants. Based on the available scientific evidence and clinical experience, recommendations for the practitioner are given.

A comparative analysis of dual-axis implants placed into maxillary anterior extraction sockets versus virtual planning with uniaxial implants: A simulated cone beam computed tomography study of implant length and diameter.

OBJECTIVE: The biaxial nature of the anterior maxilla poses a surgical and restorative challenge in implant dentistry. The present study sought to investigate the apical socket perforation rate (ASPR) from a simulated uniaxial implant placement and to determine the effect of implant length and diameter on ASPR when a uniaxial implant was placed compared with the orientation of the pre-existing dual-axis implant. MATERIAL AND METHOD: Cone beam computed tomography (CBCT) scans from the database of three private practices were searched for patients who received dual-axis implants within the esthetic zone in immediate tooth replacement therapy. A uniaxial implant was virtually placed using the pre-existing screw access channel of the dual-axis implant as a reference. The closest length and diameter were selected for the simulated implant. ASPR by the uniaxial implant was recorded. In addition, the affordable maximum length of a corresponding uniaxial implant that would avoid apical socket perforation was measured. RESULT: Eighty-one patients with a total of 101 dual-axis dental implants were selected for analysis. A simulated virtual surgical planning with uniaxial implants revealed high ASPR (48.51%). When the length of the uniaxial implant was reduced to 11 and 9 mm, ASPR was decreased to 41.58% and 20.79%, respectively. CONCLUSION: Dual-axis implant design effectively evades anatomical challenges in the anterior maxilla (esthetic zone). Considering the current evidence, efforts should be made to carefully consider the angular disparity between the extraction socket-alveolus complex and the future restorative emergence so that a harmonious biologic-esthetic result may be more predictably and consistently obtained.

Changes in Peri-Implant Soft Tissue Thickness with Bone Grafting and Dermis Allograft. Part III: A Case Series Using a Novel, Hybrid Implant Design with a Subcrestal Angle Correction.

This comparative case series presents 16 consecutively placed and temporized immediate implants in the maxillary esthetic zone. The implants have a novel, inverted body-shift design, intended to achieve high levels of primary stability via the tapered apical portion. The coronal narrow cylinder provides greater space between the implant platform and facial socket wall and adjacent teeth/implants, allowing a greater opportunity for augmentation. The restorative platform also features a subcrestal angle correction, which facilitates screw retention. The wider, facial platform-shift thus creates more room for augmentation via dual-zone bone grafting and the application of a dermal allograft, which yields greater soft tissue thickness after initial healing. This case series aimed to evaluate soft tissue thickness and compare the results to two previously published cohorts where implant design served as the only variable between groups.

The effect of implant macrogeometry in immediate tooth replacement therapy: A case series.

The concept of immediate tooth replacement therapy (ITRT) in the esthetic zone has become a viable treatment modality and widely accepted in clinical practice. However, achieving adequate primary stability that enables immediate provisional restoration and desirable space for bone-grafting with conventional tapered body implant designs is challenging. The macro-hybrid implant design with a prosthetic angle correction and body-shift feature in a singular form provides not only greater primary stability of a wider diameter implant but also circumferential gap distance both facially and interproximally preserve the labial bone plate and interdental attachment apparatus of the adjacent natural teeth thereby maintaining the interdental papilla. The present clinical series exemplifies the clinical advantages of this inverted body-shift implant design in ITRT in various clinical scenarios in (1) single tooth replacement in a Type 1 intact socket with a thin periodontal phenotype, (2) single tooth replacement in a Type 2 socket with a dentoalveolar dehiscence of the labial bone plate, and (3) multiple adjacent teeth replacement of two maxillary central incisor. CLINICAL SIGNIFICANCE: The macro-hybrid design implant with a prosthetic angle correction and body-shift feature in a singular form provides greater midfacial gap distance as well as tooth-to-implant distance to preserve the interdental attachment of the adjacent natural teeth thereby leaving the interdental papilla undisturbed, without sacrificing higher primary stability afforded by larger diameter implants.

Interdisciplinary management of recession defects on maxillary single tooth implants: Diagnosis and treatment strategies.

OBJECTIVE: One of the most common complications with dental implants placed in the smile zone is the development of mid-facial recession, creating an undesirable esthetic result. When deciding how to remediate these clinical scenarios, the question becomes whether it may be feasible to save the problematic implant or if it is more predictable to remove the implant and start all over again. However, patients may be invested emotionally, physically, and financially in the implant and remediation may be a viable option depending on the diagnosis of the specific issues at hand and multi-disciplinary clinical execution. CLINICAL SIGNIFICANCE: What is crucial to understand in order to remediate these cases is answering four separate criteria: (1) is the implant in a restorable position, (2) is the implant healthy, (3) is the implant placed at an adequate depth, and (4) are components available to restore the implant. CONCLUSIONS: Two different clinical reports are presented that demonstrate various treatment remedies when saving implants in the esthetic zone.

Outcomes of a 1-Year Prospective Single-Arm Cohort Study Using a Novel Macro-Hybrid Implant Design in Extraction Sockets: Part 1.

A novel macro-hybrid implant design was introduced to afford high apical primary stability and more coronal space to preserve the circumferential extraction socket architecture. This study presents 1-year data from a prospective single-arm cohort study. The data was distilled based on the following criteria: (1) single-tooth immediate tooth replacement therapy (ITRT) in the maxillary anterior and premolar regions in intact (Type 1) extraction sockets that were (2) treated with the dual-zone grafting technique. The clinical and radiographic outcomes of 48 ITRT implants were evaluated. The mean ± SD labial plate dimension changes were 0.33 ± 0.41 mm at the implant abutment interface (L1) and 0.34 ± 0.40 mm at 5.0 mm below (L2). The mean labial plate dimension (thickness) at the 1-year recall was 2.27 ± 0.88 mm (L1) and 1.95 ± 0.95 mm (L2). At ITRT, the ridge contour at the free gingival margin and 3.0 mm below it were 7.54 ± 0.93 mm and 9.44 ± 2.36 mm, respectively; after final restoration delivery, the corresponding values were 7.45 ± 0.95 mm and 10.23 ± 2.30 mm, respectively. The peri-implant soft tissue thickness (PISTT) at the time of implant-level impression-making was 3.29 ± 0.73 mm, with an average Pink Esthetic Score of 12.79. A macro-hybrid implant design showed high levels of primary stability (~60 Ncm), stable ridge contour at 1 year, a labial plate dimension between 1.5 and 2.0 mm, and PISTT > 3.0 mm, which may be a critical factor in providing stable, long-term esthetic outcomes.

A Novel Implant Design for Immediate Extraction Sites: Determining Primary Stability.

Achieving primary stability is a critical challenge presented by immediate implant therapy. Surgeons often utilize wider, tapered implants for this purpose, or they use longer implants to achieve primary stability. Both strategies are associated with negative ramifications. Prosthetically guided implant placement must respect biologic principles, such as tooth-implant and implant-implant distance, gap space between the implant and the facial cortex, and, when possible, screw-retention of the prosthesis. A novel implant design geared toward achieving a predictable level of primary stability while adhering to the aforementioned physiologic principles was recently introduced. Both primary and secondary implant stability, along with hard and soft tissue stability, are demonstrated in this study of 107 consecutively placed implants. Rotational and axial stability can be produced with this newly designed implant, along with predictable osseointegration and tissue preservation.

Use of a Novel Implant with an Inverted Body-Shift and Prosthetic Angle Correction Design for Immediate Tooth Replacement in the Esthetic Zone: A Clinical Case Series.

A clinical case series of three patients is presented using a novel implant design to not only address primary stability but also to prevent damage to the labial bone plate and improve the interdental space for papillae preservation with immediate tooth replacement therapy. This unique implant design features an apicocoronal inverted body-shift in diameter (wide to narrow), shape (tapered to cylindrical), thread depth (deep to shallow), and thread pattern (V-shaped to square) to achieve uncompromised primary stability and esthetics, particularly in extraction sockets, in a singular body form. In addition, the implant possesses a prosthetic angle correction within the implant body to facilitate screw-retention of the restoration and avoid the risk of apical socket perforation.

When to save or remove implants in the smile zone: A clinical report of maxillary lateral incisor implants in malposition.

OBJECTIVE: The following is a clinical report addressing when to save or remove implants with esthetic deficiencies in the smile zone as well as the sequence and timing of interdisciplinary treatment. CLINICAL CONSIDERATIONS: Key factors in the decision-making process in treating implants in malposition are whether the implants are (1) in a reasonable restorative position, (2) free of disease, and (3) placed with adequate depth. This clinical report encompassed periodontal corrective surgery, non-surgical soft tissue sculpting through subgingival crown contour, material selection for definitive restorations, and cementation techniques for cement-retained restorations. CLINICAL SIGNIFICANCE: Knowledge and understanding of interdisciplinary treatment planning, sequencing, and respective techniques that can be implemented when confronting implants in malposition in the smile zone will allow the interdisciplinary team to achieve the desired esthetic restorative result.

Managing restorative space, color matching, and tooth replacement with a novel implant through interdisciplinary treatment: A case report of partial anodontia and malformed teeth in the esthetic zone.

A case report of tooth agenesis and excessive intraarch space due to tooth size discrepancies and malformed teeth is presented. Interdisciplinary treatment including orthodontics, implant surgery, prosthodontics, and laboratory fabrication with dissimilar restoration and material types was used to accomplish an esthetic and functional outcome. Proper diagnosis of individual tooth width and proportion were key elements in treatment. CLINICAL SIGNIFICANCE: Knowledge and understanding of the relationships of the mandibular to maxillary anterior teeth and shade management of dissimilar restoration types will allow the interdisciplinary team to achieve the desired esthetic restorative result.

Qualitative and Quantitative Assessments of Alveolar Bone Dimension and Its Correlation with Tooth Angulation in the Anterior Maxilla for Immediate Implant Placement.

AIM AND OBJECTIVE: The aim of this paper is to ascertain the quantitative measurements of alveolar bone thickness at all maxillary anterior teeth and qualitatively demonstrate the relationship between tooth angulation (TA) and alveolar bone thickness. MATERIALS AND METHODS: Cone-beam computed tomography (CBCT) images of 189 maxillary anterior teeth were collected. Sagittal view was selected to perform the measurement on alveolar bone wall at crestal, midlevel, and palatal. TA was measured along to the tooth long axis (TLA) related to the alveolar bone housing. Spearman's correlation coefficients were conducted to test the correlation between the variables. RESULTS: The facial alveolar bone (FAB) is predominantly thin (<1 mm) at the crestal and midroot region. A significant difference was recorded in the median thickness of FAB at the midroot and apical area (p = 0.001, p = 0.021). The FAB thickness was not gradual with midroot being thinner than crestal. For the palatal alveolar bone (PAB), the thickness was increased continuously toward the apex. At all apical levels of inspected teeth, a significant negative correlation existed between TA and FAB. A positive correlation of TA was only significant at the facial crest of lateral incisor (r = 0.308). However, the canines did not correlate with the FAB, but correlated with the PAB at the apical level (r = 0.478). CONCLUSION: The FAB wall crest of maxillary anterior teeth was generally thin and not gradual with the lateral incisor being the thinnest. A significant correlation of TA existed based on different types of maxillary anterior teeth and alveolar bone level. The maxillary anterior teeth with increased buccolingual angulation were correlated with thicker bone at the apical level. CLINICAL SIGNIFICANCE: The quantitative assessment of FAB and TA in degree may serve as an anatomical index for ideal implant position.

Inverted body-shift concept in macroimplant design to enhance biologic and esthetic outcomes: A clinical report.

A new implant design to increase labial plate dimension and tooth-implant distance in maxillary anterior extraction sockets over traditional tapered implant designs is presented. Generally, tapered implants are divergent and wider at the coronal aspect of the implant adjacent to the lowest bone volume. Decreasing bone around implants over time can lead to ridge collapse, recession, and a graying effect of the gingival tissues that eventually impacts esthetic outcomes adversely. This implant design incorporates a body-shift in both diameter, shape, and thread pattern and reduces the coronal portion to allow greater circumferential bone thickness to be created where it is needed most for long-term stability.

Immediate Tooth Replacement Therapy in Postextraction Sockets: A Comparative Prospective Study on the Effect of Variable Platform-Switched Subcrestal Angle Correction Implants.

Immediate tooth replacement therapy (ITRT), ie, immediate implant placement and provisional restoration in postextraction sockets, has been shown to achieve favorable outcomes in reference to soft tissue stability and esthetics. However, avoiding socket perforation with uniaxial implants in the anterior maxilla can be challenging due to the inherent anatomy. Dual or co-axis subcrestal angle correction (SAC) implants have been developed to change the restorative angle of the clinical crown restoration subcrestally at the implant-abutment interface to enhance the incidence of screw-retained definitive restorations. An additional benefit of this macrodesign implant feature is variable platform switching (VPS) that increases soft tissue gap distance above the implant platform. The purpose of this prospective study on ITRT in maxillary anterior postextraction sockets was to investigate the effect of SAC with VPS (SAC/VPS) compared to conventional platform-switch-design implants (PS) relative to ridge dimension stability and peri-implant soft tissue thickness. A total of 29 patients had undergone ITRT and received either a PS or SAC/VPS implant; previously described measurements were made compared to the contralateral natural tooth sites. When the comparison of buccal soft tissue thickness was made, SAC/VPS showed a greater increase compared to PS (3.12 mm vs 2.39 mm, respectively) with statistical significance (P = .05). The increase was independent from periodontal phenotype. Therefore, SAC/VPS may increase peri-implant soft tissue thickness and help minimize recession following ITRT.

Tapered Versus Inverted Body-Shift Implants Placed Into Anterior Post-extraction Sockets: A Retrospective Comparative Study.

BACKGROUND: A retrospective comparative radiographic and clinical studywas performed to evaluate primary stability, bone volume, and esthetic outcomes of tapered (T) implants (control group) versus inverted body-shift (INV) implants (test group). METHODS: A total of 42 platform-switched implants, 21 T and 21 INV, were used to replace nonrestorable teeth in maxillary central incisor post-extraction sockets. Implant primary stability and insertion torque values in addition to radiographic differences in labial plate dimension, tooth-to-implant distance, and marginal bone levels were correlated with clinical outcomes using the pink esthetic score (PES). RESULTS: Statistically significant differences (P ≤ .05) were found between groups, with T implants having not only lower primary stability at immediate implant placement than INV implants but also less circumferential bone volume at recall. Consequently, lower PESs were seen in the T implant group that equated to an increased frequency of midfacial recession, tissue discoloration, and papilla loss. CONCLUSIONS: INV implants, which feature a unique macro hybrid design, may offer advantages over T implants in maxillary anterior post-extraction sockets with regard to achieving both higher primary stability and superior esthetic outcomes.

Clinical Outcomes of Maxillary Anterior Postextraction Socket Implants with Immediate Provisional Restorations Using a Novel Macro-Hybrid Implant Design: An 18- to 24-Month Single-Cohort Prospective Study.

Extraction and immediate implant placement/restoration in the esthetic zone is clinically challenging; benefits include fewer surgical appointments and maintenance of peri-implant soft tissues throughout the treatment period, and limitations include gingival recession and bone dehiscence during surgery. Macro-hybrid implants (large-diameter apical/narrow-diameter occlusal) were placed in 19 patients immediately following the extraction of hopeless maxillary anterior teeth. Immediate restorations were fabricated without occlusal contacts. Pre- and postplacement cone beam computed tomography (CBCT) scans were taken. Nineteen implants were available for recall 13 to 25 months postoperatively. The overall implant cumulative survival rate was 100% (range: 13 to 25 months, mean: 19 months), and mean insertion torque value was 65 Ncm. Mean Pink Esthetic Score was 12.63 at 6 months, and was 13 at the 18- to 24-month follow-up. Mean mesial and distal tooth-to-implant distances immediately after implant placement were 2.55 ± 1.29 mm and 2.29 ± 0.82 mm, respectively. Interproximal bone crest width, distance, and height were maintained at implant platforms, mesially and distally, 18 to 24 months postoperative. The results of this study indicated that the macro-hybrid implant geometry for this immediate surgical/restorative protocol provided excellent and stable 2-year results relative to implant survival (100%), labial plate thickness via CBCT evaluations, tooth-to-implant distances immediately post-implant placement, PES, and interproximal bone crest width, distance, and heights, which were maintained at the implant platforms.

Changes in Peri-implant Soft Tissue Thickness with Bone Grafting and Dermis Allograft. Part II: A Comparative Retrospective Case Series Using a Subcrestal Angle Correction Implant Design.

Immediate tooth replacement therapy (ITRT) in the maxillary anterior sextant is an increasingly frequent treatment option sought by patients and performed by clinicians worldwide. Achieving long-term results that are predictable, stable, esthetic, and healthy is the ultimate goal. This trend also lends itself to minimally invasive surgery as well as defining the procedure to a singular surgical intervention. Preserving and augmenting hard and soft tissues at the time of immediate implant placement provides the best opportunity to achieve these goals. Incorporating an implant with a subcrestal angle correction [SAC] or biaxial feature facilitates screw-retention of both provisional and definitive restorations through the cingulum portion of the crown. Compared to uniaxial implants, these implants also feature an extended or variable platform switch [VPS] facially. Measurements of the peri-implant soft tissue thickness 2.0 mm apical to the facial free gingival margin were compared between two groups of 15 consecutively treated patients with different implant designs to evaluate the effect of SAC/VPS for ITRT. The null hypothesis was that there is no difference between uniaxial and biaxial implants with bone grafting and dermis allograft. These authors contend that using a combined hard and soft tissue grafting approach along with SAC/VPS biaxial implants has a synergistic effect on increasing peri-implant soft tissue thickness compared to uniaxial implants.