Thermally Stable Low-Loss Polymer Dielectrics Enabled by Attaching Cross-Linkable Antioxidant to Polypropylene.

Polymer dielectrics with low-loss and high-temperature tolerance are extremely desirable as electrical energy storage materials for advanced electronics and electrical power applications. They can allow fast switching rates during power conversion and therefore achieve high power densities without thermal issues. Here, we explore polypropylene (PP), the state of the art dielectric polymer, and present an innovative approach to substantially improve the thermal stability and concurrently reduce the dielectric loss of PP. In particular, cross-linkable antioxidant groups, hindered phenol (HP), are incorporated into PP via well-controlled chemical synthesis. The grafted HP can simultaneously serve as radical scavenger and cross-linker, thereby constraining thermally decomposed radicals and charge transport in the synthesized PP-HP copolymer. As a result, the upper-temperature limit of PP-HP is greatly extended to 190 °C and the electrical loss is even gradually reduced upon thermal annealing. The copolymer after heating under 190 °C exhibits better dielectric properties than the PP without any thermal treatment. The experimental results indicate that the PP-HP copolymers are promising materials for high-temperature, low-loss, and high-voltage dielectric applications.

Chopart amputation with tibiotalocalcaneal arthrodesis and free flap reconstruction for severe foot crush injury.

AIMS: This study reports the outcomes of a technique of soft-tissue coverage and Chopart amputation for severe crush injuries of the forefoot. PATIENTS AND METHODS: Between January 2012 to December 2016, 12 patients (nine male; three female, mean age 38.58 years; 26 to 55) with severe foot crush injury underwent treatment in our institute. All patients were followed-up for at least one year. Their medical records, imaging, visual analogue scale score, walking ability, complications, and functional outcomes one year postoperatively based on the American Orthopedic Foot and Ankle Society (AOFAS) and 36-Item Short-Form Health Survey (SF-36) scores were reviewed. RESULTS: The mean length of follow-up was 18.6 months (13 to 28). Two patients had a local infection, flap necrosis was seen in one patient, and one patient experienced a skin graft wound healing delay. Of the 12 patients, one had persistent infection and eventually required below-knee amputation, but pain-free walking was achieved in all the other patients. The mean one-year postoperative AOFAS and SF-36 scores were 75.6 (68 to 80) and 82 (74 to 88), respectively. CONCLUSION: Although our sample size was small, we believe that this treatment method may be a valuable alternative for treating severe foot crush injuries. Cite this article: Bone Joint J 2018;100-B:1359-63.

Improved ATR-FTIR detection of hydrocarbons in water with semi-crystalline polyolefin coatings on ATR elements.

In situ measurement of hydrocarbons in water is critical for assuring the safety and quality of drinking water and in environmental remediation activities such as the cleanup of oil spills. Thus, effective detection methods of hydrocarbons in aqueous environments are important and several methods have been used for this type of sensing, including spectroscopic techniques, fiber optic sensors, and chromatography. However, under aqueous conditions, small amounts of hydrocarbons are difficult to detect due to their low concentration in water and robust sensing of these types of compounds in an aqueous environment remains a challenging analytical task. Hydrophobic polymer coatings have been widely used to concentrate hydrocarbons for attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) detection at the surface of an ATR crystal by preventing water molecules from penetrating into the polymer coating while absorbing hydrocarbons. However, in typical coating designs only thin films (<5 µm) can be applied onto the ATR sensor due to the decrease in detection limit and sensitivity to hydrocarbons with increasing film thickness. This paper demonstrates that a semi-crystalline linear low-density polyethylene (LLDPE) polymer coating with thicker thickness (40 µm) can be applied effectively for in situ ATR-FTIR detection of hydrocarbons in aqueous solution. The ATR signal is enhanced by the polymer coating which swells in response to the hydrocarbons and prevents water accumulation at the IR detection interface. Coating the ATR element with a LLDPE film (crystallinity = 12%) reduced the detection time for various hydrocarbons, including toluene, benzene and chloroform. The detection limits and kinetics of the ATR-FTIR detection were not significantly altered when the thickness of the LLDPE coating was increased to improve its mechanical properties which represents a significant improvement from coatings published in the literature. The LLDPE coating described in this research has the potential to be applied as a sensor coating for rapid detection of hydrocarbon-based substances or non-polar biomolecules in aqueous environments.

Polyolefin-based interpenetrating polymer network absorbent for crude oil entrapment and recovery in aqueous system.

In this research, a series of different two polyolefin-based interlaced polymer network material was prepared with a semi-crystalline linear low density polyethylene (LLDPE, thermoplastic) and a crosslinked 1-decene/divinylbenzene (1-D/DVB, elastomer) having high crude oil absorption capacity. The prepared absorbents, LLDPE/D/DVB, were characterized by NMR, TEM, contact angle measurement and TGA analysis. It was observed that the mixing ratio of two interlaced polymer network played a crucial role in determining its crude oil absorption capacity. The swelling capacity of absorbent prepared from a 1:1 mixing of LLDPE and D/DVB (0.2 ml) exhibit high removal efficiency in crude oil absorption over 40 g/g at both 25 °C and 0 °C. The removal of the absorbed crude oil from the water surface is effective. As the absorbent made of polyolefin materials have pure hydrocarbon content, offer significant advantages such as high absorption capacity, simple recovery, and recyclability.

Critical role of morphology on the dielectric constant of semicrystalline polyolefins.

A particularly attractive method to predict the dielectric properties of materials is density functional theory (DFT). While this method is very popular, its large computational requirements allow practical treatments of unit cells with just a small number of atoms in an ordered array, i.e., in a crystalline morphology. By comparing DFT and Molecular Dynamics (MD) simulations on the same ordered arrays of functional polyolefins, we confirm that both methodologies yield identical estimates for the dipole moments and hence the ionic component of the dielectric storage modulus. Additionally, MD simulations of more realistic semi-crystalline morphologies yield estimates for this polar contribution that are in good agreement with the limited experiments in this field. However, these predictions are up to 10 times larger than those for pure crystalline simulations. Here, we show that the constraints provided by the surrounding chains significantly impede dipolar relaxations in the crystalline regions, whereas amorphous chains must sample all configurations to attain their fully isotropic spatial distributions. These results, which suggest that the amorphous phase is the dominant player in the context, argue strongly that the proper polymer morphology needs to be modeled to ensure accurate estimates of the ionic component of the dielectric constant.

Characterization of Polyethylene-Graft-Sulfonated Polyarylsulfone Proton Exchange Membranes for Direct Methanol Fuel Cell Applications.

This paper examines polymer film morphology and several important properties of polyethylene-graft-sulfonated polyarylene ether sulfone (PE-g-s-PAES) proton exchange membranes (PEMs) for direct methanol fuel cell applications. Due to the extreme surface energy differences between a semi-crystalline and hydrophobic PE backbone and several amorphous and hydrophilic s-PAES side chains, the PE-g-s-PAES membrane self-assembles into a unique morphology, with many proton conductive s-PAES channels embedded in the stable and tough PE matrix and a thin hydrophobic PE layer spontaneously formed on the membrane surfaces. In the bulk, these membranes show good mechanical properties (tensile strength >30 MPa, Young's modulus >1400 MPa) and low water swelling (λ < 15) even with high IEC >3 mmol/g in the s-PAES domains. On the surface, the thin hydrophobic and semi-crystalline PE layer shows some unusual barrier (protective) properties. In addition to exhibiting higher through-plane conductivity (up to 160 mS/cm) than in-plane conductivity, the PE surface layer minimizes methanol cross-over from anode to cathode with reduced fuel loss, and stops the HO• and HO2• radicals, originally formed at the anode, entering into PEM matrix. Evidently, the thin PE surface layer provides a highly desirable protecting layer for PEMs to reduce fuel loss and increase chemical stability. Overall, the newly developed PE-g-s-PAES membranes offer a desirable set of PEM properties, including conductivity, selectivity, mechanical strength, stability, and cost-effectiveness for direct methanol fuel cell applications.

The relationship between diabetic autonomic neuropathy and diabetic risk factors in a Taiwanese population.

This study looked at spectral analysis of heart rate variability (HRV) between patients with type 2 diabetes mellitus (DM) and healthy controls. The association between diabetic autonomic neuropathy (DAN) with HRV parameter changes and DM risk factors (including nephropathy) was investigated. HRV parameters were compared between 271 patients with DM and 160 controls. A statistically significant difference was found between the two groups for each parameter. Patients with DM were then divided into three groups by the levels of individual risk factors: body mass index, total cholesterol, 2-h postprandial plasma glucose concentration, glycosylated haemoglobin, duration of DM and the albumin-creatinine ratio. HRV parameters decreased significantly in patients with DM as the risk factor level progressed. This study identified previously known and new potential risk factors for the development of DAN, which may be important for the development of risk reduction strategies.

Introduction of an AmpR-L2 intergenic segment attenuates the induced beta-lactamase activity of Stenotrophomonas maltophilia.

Expression of the L1 and L2 beta-lactamase genes is generally regulated by a LysR type regulator of the AmpR in Stenotrophomonas maltophilia. The ampR gene is located immediately upstream of L2 and is transcribed divergently, forming an ampR-L2 module. The ampR-L2 modules of 16 S. maltophilia isolates were analyzed, revealing that the ampR-L2 intergenic (IG) regions show a significant genetic diversity, whereas AmpR proteins are highly conserved. The induction potential of the different AmpR toward the different ampR-L2 IG regions was evaluated by introducing the various IG-xylE transcriptional fusion constructs into a wild S. maltophilia strain. The induction levels achieved in the various AmpR-IG pairs display quantitative differences; meanwhile, the host beta-lactamase activity, in some cases, is attenuated by the introduced IG segment. Similar beta-lactamase attenuation phenomenon was observed in Enterobacter cloacae with an ampR-L2 IG segment of S. maltophilia. A concept of oligonucleotides attenuator for the development of an antimicrobial agent is proposed.

Synthesis of microporous boron-substituted carbon (b/c) materials using polymeric precursors for hydrogen physisorption.

This paper discusses a new synthesis route to prepare microporous boron substituted carbon (B/C) materials that show a significantly higher hydrogen binding energy and physisorption capacity, compared with the corresponding carbonaceous (C) materials. The chemistry involves a pyrolysis of the designed boron-containing polymeric precursors, which are the polyaddition and polycondensation adducts between BCl3 and phenylene diacetylene and lithiated phenylene diacetylene, respectively. During pyrolysis, most of the boron moieties were transformed into a B-substituted C structure, and the in situ formed LiCl byproduct created a microporous structure. The microporous B/C material with B content > 7% and surface area > 700 m2/g has been prepared, which shows a reversible hydrogen physisorption capacity of 0.6 and 3.2 wt % at 293 and 77 K, respectively, under 40 bar of hydrogen pressure. The physisorption results were further warranted by absorption isotherms indicating a binding energy of hydrogen molecules of approximately 11 kJ/mol, significantly higher than the 4 kJ/mol reported on most graphitic surfaces.

Stabilization of calpain large subunits by overexpression of truncated calpain small subunit in L8 myoblasts.

The objectives were to investigate the function of the small subunit in the calpain system by expression of the autolytic form of this subunit in L8 myoblasts. Rat post-autolysis small subunit (21 kDa) cDNA expression plasmid was transfected into L8 myoblasts and selected by G418 containing medium. The concentrations of cytosolic micro-calpain in transfected cells, SS2 and SS3, were found to be 15.7 and 17.3% higher than that in L8Neo control cells, and the concentrations of cytosolic m-calpain in SS2 and SS3 cells were 23.3 and 16.6% higher than that in control cells (L8Neo). The half-life of micro-calpain in SS3 cells (36.5 h) was longer than that in L8Neo cells (32.4 h), while the half-life of m-calpain in SS3 cells (40.1 h) was longer than that in L8Neo cell (37.5 h). These results indicated that the expression of truncated small subunit increased the stability of micro- and m-calpain large subunits in cytosol.

Betel quid chewing and risk of adverse birth outcomes among aborigines in eastern Taiwan.

It is known that substance abuse during pregnancy is associated with increased risk of adverse birth outcomes. The aim of this study was to determine the use of alcohol, cigarettes, betel quid, and drugs among pregnant aboriginal women and to assess the risk of adverse effects of betel quid use on birth outcomes in eastern Taiwan. Of a total of 229 women recruited into this study, 32 women with adverse birth outcomes constituted the case group. Analyses revealed that adverse birth outcomes were associated with maternal betel quid chewing and maternal age. After adjusting for maternal age, the risk of adverse birth outcome was five times higher among betel quid chewing women as compared to substance nonusers. Based on this finding, it is suggested health education, especially when concerned with the harmful effects of substance abuse, which includes betel quid use during pregnancy, should be stressed in concert with routine prenatal care.

Characterization of the replication region of the Lactobacillus reuteri plasmid pTC82 potentially used in the construction of cloning vector.

A 3.2 kb DNA fragment containing the replication region (RR) from pTC82 was cloned, sequenced, and found to contain elements typical of plasmids that replicate via a rolling-circle mechanism of replication (RCR), including double-strand origin (DSO), replication protein gene (rep), and single-strand origin (SSO). The DSO of pTC82 contains two domains showing 55.5% and 84.6% similarities in nucleotide (nt) sequence to the conserved functional elements bind and nic, respectively, which are required for the initiation of the leading strand typical of the pC194-RCR family. Although the predicted rep gene product of pTC82 (Rep82) shares little identity (less than 24%) with other known Reps, a region containing three motifs, characteristic of the pC194-family Reps, was identified, indicating the Rep82 as a novel Rep protein of this family. Downstream of the rep82 gene, strong similarity to the typical palT type-SSO could be detected. This is the first palT type-SSO to be identified from Lactobacillus. Through a series of deletion studies, the minimal replicon of the cloned RR was found to be 2.66 kb in size including the DSO region and rep gene. This RR was further identified as being highly stable in L. reuteri and also bearing a very narrow host-range property, suggesting it to be a good replicon potentially useful in vector construction for developing L. reuteri as a vaccine carrier.

A novel consecutive chain transfer reaction to p-methylstyrene and hydrogen during metallocene-mediated olefin polymerization.

This paper describes the first example of consecutive chain transfer reaction, first to p-methylstyrene (or styrene) and then to hydrogen, during metallocene-catalyzed propylene polymerization by rac-Me(2)Si[2-Me-4-Ph(Ind)](2)ZrCl(2)/MAO complex. The PP molecular weight is inversely proportional to the molar ratio of [p-methylstyrene]/[propylene] and [styrene]/[propylene] with the chain transfer constants of k(tr)/k(p) = 1/6.36 and 1/7.5, respectively. Although hydrogen does not influence the polymer molecular weight, it greatly affects the catalyst activity. Each PP chain formed contains a terminal p-methylstyrene (or styrene) unit. The terminal p-MS unit can be metalated to form a stable polymeric anion for living anionic polymerization to prepare new PP diblock copolymers, such as PP-b-PS, which are very difficult to prepare by other methods. The overall process resembles a transformation reaction from metallocene to living anionic polymerization.

Hepatoprotective effects of Arctium lappa on carbon tetrachloride- and acetaminophen-induced liver damage.

The root of Arctium lappa Linne (A. lappa) (Compositae), a perennial herb, has been cultivated for a long time as a popular vegetable. In order to investigate the hepatoprotective effects of A. lappa, male ICR mice were injected with carbon tetrachloride (CCl4, 32 microl/kg, i.p.) or acetaminophen (600 mg/kg, i.p.). A. lappa suppressed the SGOT and SGPT elevations induced by CCl4 or acetaminophen in a dose-dependent manner and alleviated the severity of liver damage based on histopathological observations. In an attempt to elucidate the possible mechanism(s) of this hepatoprotective effect, glutathione (GSH), cytochrome P-450 (P-450) and malondialdehyde (MDA) contents were studied. A. lappa reversed the decrease in GSH and P-450 induced by CCl4 and acetaminophen. It was also found that A. lappa decreased the malondialdehyde (MDA) content in CCl4 or acetaminophen-intoxicated mice. From these results, it was suggested that A. lappa could protect the liver cells from CCl4 or acetaminophen-induced liver damages, perhaps by its antioxidative effect on hepatocytes, hence eliminating the deleterious effects of toxic metabolites from CCl4 or acetaminophen.

The hepatoprotective effects of Solanum alatum Moench. on acetaminophen-induced hepatotoxicity in mice.

Solanum alatum Moench. has been shown to have a protective effect against carbon tetrachloride (CCl4)-induced liver injury. Solanum alatum treatment (100 mg/kg, p.o.) decreased the elevation of serum alanine aminotransferase (ALT; GPT) and aspartate aminotransferase (AST; GOT) induced by acetaminophen (paracetamol) (600 mg/kg, i.p.) administration. It also decreased the extent of visible necrosis in liver tissue. In addition, Solanum alatum treatment restored hepatic glutathione (GSH) depletion induced by acetaminophen (600 mg/kg, i.p.) administration. Microsomal enzyme levels such as P-450, reductase, and aniline hydroxylation enzyme were also restored to normal levels after Solanum alatum administration. The hepatoprotective mechanism may function through direct binding with acetaminophen toxic metabolites, decreasing the attraction of acetaminophen metabolites for other cellular GSH or thiol protein. Additionally, Solanum alatum treatment increased the concentration of hepatic GSH and maintained a high level activity of GSTase, which led to acceleration of the excretion of toxic acetaminophen metabolites.

Resection and permanent I-125 brachytherapy without whole brain irradiation for solitary brain metastasis from non-small cell lung carcinoma.

We assessed a treatment plan of local therapy (resection and placement of permanent low dose-rate I-125 seeds) without whole brain irradiation in 15 patients with solitary brain metastasis (SBM) from primary non-small cell lung cancer between January, 1991 and May, 1996. Thirteen lesions were confirmed as solitary by MRI scan, and 2 patients had CT scan only. With median follow up of 14 months, 3 patients remain alive at 6, 33, and 62 months post-resection. Median survival is 14 months for all patients and 26 months for patients with SBM as the only site of disease. Five tumors failed in the brain: 2 solitary recurrences adjacent to the site of SBM, 2 multiple metastases outside the primary site, and 1 multiple recurrence including the primary site. No failures were seen with SBM <2.5 cm. Only 2 of 13 patients with SBM confirmed with MRI experienced relapses elsewhere in the brain. Recurrence rates both adjacent and outside the area of the initial brain lesion are similar to studies employing resection plus whole brain irradiation (WBI), and the patient is spared the acute and potential late toxicity of WBI. This approach may be considered for selected patients with solitary brain metastases (SBMs), although further experience with larger patient numbers is needed.

The correlates of depressed mood in adolescents in Hong Kong.

PURPOSE: Most studies of depressed mood and its correlates in adolescents have been conducted in Western countries. This study examined the relationship between a broad range of stressors and depressed mood in a community sample of Hong Kong adolescents. METHODS: Secondary school students (n = 996) completed the Chinese Beck Depression Inventory (C-BDI), provided demographic information, and indicated their perceptions of family and peer relationships, school function and pressures, and subjective health, and some measures salient to the Hong Kong environment: triad gang pressure, religiosity, and intent to emigrate. The correlation between C-BDI and these variables was assessed in bivariate and multivariate analyses. RESULTS: Hong Kong adolescents reported higher levels of depressive symptoms than a comparison group of Western teenagers. Girls showed more symptoms than boys. All stressors correlated in bivariate analyses with C-BDI, indicating similar influences on depressed mood in Western and Hong Kong teenagers. In multivariate analyses, the stressors contributed cumulatively to the C-BDI score. Perceptions of a lack of parental understanding and peer acceptance appeared as the strongest variables in predicting depressed mood. CONCLUSIONS: Depressed mood is highly prevalent among Hong Kong teenagers. Stressors play a cumulative role in their relationship to mood. Our findings point to the importance of broad screening of this vulnerable population.

Cloning of erythromycin-resistance determinants and replication origins from indigenous plasmids of Lactobacillus reuteri for potential use in construction of cloning vectors.

Lactobacillus reuteri L1 and N16 strains contain a 7.0-kb plasmid (pTE80) and a 15-kb plasmid (pTE15), respectively, encoding resistance to erythromycin (Em(r)). Physical maps of both plasmids were established. Nucleotide sequences of the genetic determinants encoding Em(r) on pTE80 and pTE15 revealed the existence of a very similar (ca. 99% nucleotide sequence and ca. 98% amino acid sequence identity) open reading frame for an Em(r) transmethylase gene (erm) in both plasmids. These structural erm genes, 753 and 750 bp in length, respectively, were highly related (ca. 98% nucleotide sequence and ca. 97% amino acid sequence identity) to the erm gene of L. fermentum plasmid pLEM3. Sequence analysis showed that these two erm genes from pTE80 and pTE15 could be categorized under the ermB (ermAM) class. These are the first members of the ermB (ermAM) class of Em(r) determinant from L. reuteri to be characterized at the nucleotide sequence level. The Em(r) gene from pTE80 (erm80) was then ligated into pUC18/19 to construct replication origin (RO)-screening vectors pUE80(+) and pUE80(-) (pUE80(+/-)). These plasmids contain the pUC18/19-derived multiple cloning site, ampicillin-resistance trait, and the LacZ' gene, which enable direct screening for recombinants in Escherichia coli. Once the recombinant contains a RO from L. reuteri, the Em(r) trait of erm80 is used as a selection marker for the replication of the chimeric plasmid as it is transformed into L. reuteri using the cloned RO as a replicon. Replication regions from pTE80 and pTE15 were successfully cloned into the constructed vector pUE80(-). The RO cloned from pTE80 was further identified as being highly stable in L. reuteri and also bearing a relatively narrow host range compared with that of pTE15. The Em(r) determinant (erm80) and RO cloned from pTE80 could be used in the future construction of derivatives of cloning vectors for this microbe. Moreover, the pUE80(+/-) and pTE80-RO constructed in this study have the potential to be developed as a suicide vector and an E. coli-L. reuteri shuttle vector, respectively.

Red blood cell osmotic fragility in chronically hemodialyzed patients.

Chronic renal failure induces anemia and a short erythrocyte life span. Red blood cell (RBC) osmotic fragility is the resistance of RBC hemolysis to osmotic changes that is used to evaluate RBC friability. To find the cause of shortened red cell survival in uremic patients, we evaluated the RBC osmotic fragility in 57 chronic hemodialyzed patients. Each patient had received 12 h of dialysis per week continuously prior to being enrolled in the study. Nineteen healthy volunteers served as a control group. Biochemistry, hemoglobin, electrolyte, osmolarity, beta2-microglobulin, and intact parathyroid hormone were examined before and after the dialysis session. To evaluate the osmotic fragility of RBC, blood samples were collected in heparinized test tubes. Fifty microliters of the RBC of each individual was then incubated in solutions containing a series of various concentrations of NaCl ranging from 0 to 0.6%. The concentration of NaCl at which 50% of RBCs were lysed was considered the median osmotic fragility (MOF). The results showed that the MOF was significantly greater in hemodialyzed patients before dialysis than in the control group (0.41 +/- 0.03 vs. 0.39 +/- 0.02%). The osmotic resistance to hemolysis was also recorded after dialysis (MOF 0.38 +/- 0.03%). Correlation analysis showed that the MOF was significantly correlated with urea nitrogen, serum osmolarity, and intact parathyroid hormone level. In addition, the osmotic fragility was higher in patients who had a predialysis intact parathyroid hormone level > 100 pg/dl. In conclusion, hemodialysis can improve the osmotic fragility. The mechanism underlying this improvement may be the removal of low molecular weight uremic toxins, resulting in normalization of serum osmolarity. Our results indicate that parathyroid hormone is probably a major factor influencing RBC osmotic fragility in chronic renal failure.