Effect of calcium magnesium acetate on the forming property and fractal dimension of sludge pore structure during combustion.

The changes in pore structure characteristics of sewage sludge particles under effect of calcium magnesium acetate (CMA) during combustion were investigated, the samples were characterized by N2 isothermal absorption method, and the data were used to analyze the fractal properties of the obtained samples. Results show that reaction time and the mole ratio of calcium to sulfur (Ca/S ratio) have notable impact on the pore structure and morphology of solid sample. The Brunauer-Emmett-Teller (BET) specific surface area (SBET) of sample increases with Ca/S ratio, while significant decreases with reaction time. The fractal dimension D has the similar trend with that of SBET, indicating that the surface roughness of sludge increases under the effect of CMA adding, resulting in improved the sludge combustion and the desulfurization process.

Bed agglomeration characteristics of rice straw combustion in a vortexing fluidized-bed combustor.

To investigate bed agglomeration characteristics, the combustion of pelletized rice straw was conducted in a bench-scale vortexing fluidized bed. Effects of bed temperature, superficial velocity, secondary gas velocities, and mass blended ratio of coal on the defluidization time were investigated. The alkali concentrations in different sections of the bed zone were also studied. The bed materials and agglomerates were analyzed using SEM/EDX to obtain the surface morphology and the compositions. The results revealed that the defluidization time is increased with superficial gas velocity and is decreased with bed temperature. Eutectic composition with low melting point materials promote defluidization at high temperatures. Effect of the secondary gas velocity on the defluidization time indicates different trends at different bed temperatures. The highest value of alkali concentration appears at upper bubbling zone. Coal ash can avoid the existence of a certain eutectic composition, and increases its melting point.

Effect of secondary gas injection on the peanut shell combustion and its pollutant emissions in a vortexing fluidized bed combustor.

Peanut shell is a common agricultural waste in Asia, and its high calorific value is suitable to be used as a fuel. In this study, a vortexing fluidized bed combustor (VFBC) with silica sand as the bed material was used for peanut shell combustion. There was no indication of bed agglomeration during combustions for as long as 12h. The temperatures and gas concentrations were measured along the axial direction at various operating conditions, including excess oxygen ratio and secondary gas flow rate. Results show that CO emission decreases with rising excess oxygen ratio and secondary gas flow rate, while NOx emissions show a reverse trend. To meet the minimum CO and NOx emission standards of Taiwan EPA, excess oxygen ratio ranging from 40% to 55% and secondary gas flow rate ranging from 1.56 to 2 Nm(3)/min are found optimal for crushed peanut shell combustion in a VFBC.

Pollutant emission characteristics of rice husk combustion in a vortexing fluidized bed incinerator.

Rice husk with high volatile content was burned in a pilot scale vortexing fluidized bed incinerator. The fluidized bed incinerator was constructed of 6 mm stainless steel with 0.45 m in diameter and 5 m in height. The emission characteristics of CO, NO, and SO2 were studied. The effects of operating parameters, such as primary air flow rate, secondary air flow rate, and excess air ratio on the pollutant emissions were also investigated. The results show that a large proportion of combustion occurs at the bed surface and the freeboard zone. The SO2 concentration in the flue gas decreases with increasing excess air ratio, while the NOx concentration shows reverse trend. The flow rate of secondary air has a significant impact on the CO emission. For a fixed primary air flowrate, CO emission decreases with the secondary air flowrate. For a fixed excess air ratio, CO emission decreases with the ratio of secondary to primary air flow. The minimum CO emission of 72 ppm is attained at the operating condition of 40% excess air ratio and 0.6 partition air ratio. The NOx and SO2 concentrations in the flue gas at this condition are 159 and 36 ppm, which conform to the EPA regulation of Taiwan.

Experimental study on rice husk combustion in a vortexing fluidized-bed with flue gas recirculation (FGR).

Vortexing fluidized-bed combustor (VFBC) has been proven to be an effective equipment in converting biomass wastes into clean energy. This study conducted experiments on rice husk combustion in a VFBC with FGR. The effect of FGR on combustion characteristics is investigated. In addition, the effect of operating variables such as excess oxygen ratio, and in-bed stoichiometric oxygen ratio on the temperature distributions, pollutants emissions, and combustion efficiency are also studied. The results show that the combustion efficiency of rice husk can reach 99% at optimal operation condition. CO emission increases with the in-bed stoichiometric oxygen ratio, but decreases with excess oxygen ratio. NOx emissions show inverse trend, and it can be effectively reduced by using FGR in the VFBC.

Incineration of kitchen waste with high nitrogen in vortexing fluidized-bed incinerator and its NO emission characteristics.

Some municipal solid waste (MSW) can be used as the fuel. Combustion of MSW with high nitrogen content is successfully conducted in a lab-scale vortexing fluidized-bed incinerator (VFBI). Pigskin with 16.5 wt.% nitrogen content was used to simulate the high nitrogen content kitchen waste, and silica sand was used as the bed material. The effects of operating conditions, such as the bed temperature, freeboard temperature, excess oxygen ratio, and static bed height on the CO and NO concentrations at the exit of combustor and cyclone were investigated. The experimental results show that the freeboard temperature is the most important factor for CO emission. The order of operating conditions impact on the NO emission is: (1) excess oxygen ratio; (2) bed temperature; (3) freeboard temperature; and (4) static bed height. Utilizing cyclone can significantly reduce the CO emission concentration when the CO concentration released from the freeboard is higher than 50 ppm. On the other hand, the cyclone has no significant effect on the NO emission. Despite having high nitrogen content, a low conversion from fuel-N to NO was attained. Compared with other types of combustors, VFBI reduces the CO and NO emission concentrations much better when burning MSW with high nitrogen content.

A study on fluidized bed combustion characteristics of corncob in three different combustion modes.

This paper presents results obtained from corncob combustion in a pilot scale vortexing fluidized bed combustor (VFBC). Three combustion modes including direct combustion, staged combustion and flue gas recirculation (FGR) combustion were employed, and their combustion and pollutant emission characteristics were studied. In addition, the effects of combustion fraction and bed temperature on pollutant emission characteristics were investigated. The experimental results show that the combustion fractions vary with different combustion modes, resulting in different CO and NO emission characteristics. Staged and FGR combustions can reduce the NO emission concentration. Under similar working condition, NO concentration decreases by 30% in FGR mode, while 15% in staged mode compared with direct mode.

An investigation on pollutant emissions from co-firing of RDF and coal.

Pollutant emissions from co-firing of refuse derived fuel (RDF) and coal were investigated in a vortexing fluidized bed combustor (VFBC). RDF-5 was made of common municipal solid waste (MSW). CaCO(3) was injected in the combustor to absorb HCl at 850 degrees C. The results show that NO(x) and HCl emissions increase with RDF-5 co-firing ratio. The NO(x) concentration in flue gas at the bottom of the combustor is higher than that at the top. However, the trend of HCl released is reverse compared with NO(x) emissions. It was found that the HCl concentration decreases with increasing the molar ratio of Ca/Cl. However, the effect of CaCO(3) addition on HCl retention is not significant when the molar ratio of Ca/Cl is higher than 5. The chlorine content in fly ash increases obviously with the molar ratio of Ca/Cl. PCDD/Fs emissions decrease slightly with an addition of CaCO(3). In this study incomplete combustion is regarded as the main cause for polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) formation.