ABSTRACT
(1) Background: A missing bilateral maxillary lateral incisor (MBMLI) causes aesthetic and functional problems and a multidisciplinary approach is required for treatment. This study aimed to compare the changes in the mesiodistal axial angulations of the maxillary canines and central incisors with orthodontic treatment of MBMLI. (2) Methods: A total of 56 patients with MBMLI were included in the study, and three groups were formed: the control group (Group 1, n = 20) with untreated ideal occlusion and the space opening (Group 2, n = 20) and space closure (Group 3, n = 16) groups as treated study groups. The mesiodistal angulations between the long axes of the maxillary right canine (tooth no 13), right central incisor (tooth no 11), left central incisor (tooth no 21) and maxillary left canine (tooth no 23), and the bicondylar plane, were measured on the panoramic radiographs taken pre (T0) and post treatment (T1). p < 0.05 was accepted for statistical significance. (3) Results: At T0, while there was no significant difference between the mesiodistal angulations of the right-left maxillary canines and central incisors in all groups (p > 0.05), the mesiodistal angulations of the canines in the Group 1 were significantly higher than the study groups (p < 0.05). With treatment, while the mesiodistal angulation of the canines increased in Group 2, it decreased in Group 3 (p < 0.05). On the other hand, the mesiodistal angulation of the central incisors decreased in Group 2 and did not change in Group 3 (p > 0.05). At T1, the mesiodistal angulation of the canines was found to be lower in Group 3 than in Groups 1 and 2, while the angulation of the central incisors was found to be lower in Group 2 compared to Group 1 (p < 0.05). (4) Conclusions: In the orthodontic treatment of MBMLIs, changes in the mesiodistal angulations of the maxillary canine and central incisors should be taken into account for satisfactory outcomes. It was concluded that there should be a tendency to select the space closure method in which normal mesiodistal angulations are obtained in maxillary central incisors for aesthetics and planned incisor position, and also at a low cost.
ABSTRACT
Impacted canines, which play an important role in smile aesthetics and functional occlusion, can lead to dental and skeletal malocclusions. In this study the aim was to evaluate the relationship between impacted maxillary canines and malocclusion. A total of 151 patients comprising 101 females and 50 males aged between 13 and 33 years were included. The groups were divided based on age, gender, skeletal and dental classification, and sector classification. Angular and linear measurements were performed on lateral cephalometric and panoramic radiographs. In panoramic radiographs, the vertical distance of the impacted canine to the occlusal plane and the angle between it and the bicondylar plane were measured and sector classification was performed according to its relationship with the root of the lateral incisor. Skeletal classification was performed according to the ANB angle on lateral cephalometric radiographs and dental classification by molar relationship via the intraoral photographs. The Chi-square test analyzed independent qualitative and quantitative data using Kruskal-Wallis and Man-Whitney U tests. The statistical significance level was accepted as p < 0.05. According to the intraclass correlation test, an excellent positive correlation was found with 0.985 for canine distance and 0.993 for canine angle between the repeated measurements. The impaction of the maxillary right canine was significantly highest in females and lowest in males. The impacted canine angle was significantly highest in sector 1 and lowest in sector 4. Distance to the occlusal plane was significantly higher in dental Class II and sector 4. It was observed that there was a considerable relationship between impacted maxillary canines and malocclusion; bilateral impacted canines were more frequent in skeletal Class III, and the distance of impacted canines to the occlusal plane increased while their angles decreased both in dental Class II and from sectors 1 to 4.
ABSTRACT
(i) Objective: Changes in the mesiodistal axial angulations of teeth with orthodontic treatment have been a topic of interest in orthodontics for many years, although it has not been clarified enough yet. Therefore, this present study aimed to compare mesiodistal axial angulations of canine and first molar teeth by measuring from pre- and post-treatment panoramic radiographs in different types of orthodontic malocclusions. (ii) Materials and Methods: In the study, the mesiodistal axial angulation angles of the lower-upper canines (teeth numbered 13, 23, 33, and 43) and first molars (teeth numbered 16, 26, 36, and 46) were compared on panoramic radiographs taken pre- (T0) and post- (T1) orthodontic treatment of 353 patients: 237 female (mean age 14.74 ± 2.96) and 116 male (mean age 14.44 ± 2.50), who had not received any prior orthodontic treatment. The groups were formed according to pre-/post-treatment, gender, angle classification, skeletal classification, bilaterally first premolar extraction/non-extraction, and the use/non-use of miniscrews in the extraction cases. The mesiodistal angulations between the long axes of both the lower and upper canines and first molars and the interorbital plane were measured separately and recorded. The reliability analysis between the repeated measurements was evaluated using the intraclass correlation coefficient (ICC). For statistical analysis, a paired sample t-test and Wilcoxon test were used for the normally and non-normally distributed data, respectively. For the between-groups comparison, independent sample t-test and one-way ANOVA were used for normally distributed data, while the Mann-Whitney U and Kruskal-Wallis tests were used for non-normally distributed data. A value of p < 0.05 was considered statistically significant. (iii) Results: ICCs showed excellent reliability, ranging from 0.804 to 0.913 in other teeth, yet were good in tooth 43 (ICC = 0.712). Regardless of the groups, statistically significant differences were found between the T0 and T1 angulations for all teeth, except teeth 13 and 16. In all groups, the increase in the angulations of teeth 33 and 43 and the decrease in the angulations of teeth 36 and 46 (except skeletal class 3) were found to be statistically significant. The T0 and T1 angulation changes in the miniscrews in the used and non-used groups in extraction cases were similar to the differences found in all teeth, regardless of the groups. There was no significant difference between gender, skeletal classes, and angle classes in the amounts of change in the mesiodistal angulations. (iv) Conclusion: It was concluded that orthodontic treatment caused significant changes in the mesiodistal axial angulation of the canine and the first molar teeth. Furthermore, the fact that the angulations tended to increase in the lower canine teeth and decrease in the lower first molar teeth revealed the importance of tooth movement control, especially in orthodontic mechanics in the mandibula.
ABSTRACT
The aim of this study was to compare the demineralizations of the enamel surfaces around different types of orthodontic brackets in an artificial cariogenic environment. A total of 90 extracted human maxillary first premolar teeth were used in this in vitro study. The teeth were divided into 6 groups, 5 study and 1 control, each consisting of 15 samples. Victory metal, Gemini metal, Clarity self-ligating ceramic, APC Clarity Advanced ceramic and Clarity Advanced ceramic brackets (3M Unitek, Monrovia, Calif) used in the study groups were bonded to the teeth with the direct technique. The gingival, occlusal and proximal enamel surfaces adjacent to the brackets were measured with a DIAGNOdent pen (KaVo, Biberach, Germany) (T0). Then, the teeth were placed in a cariogenic suspension environment containing Streptococcus mutans, sucrose and artificial saliva. The teeth were removed from the cariogenic suspension at the end of 28 days. Enamel surfaces were remeasured with DIAGNOdent and the values were recorded (T1). Whether the obtained data were homogeneously distributed or not was determined by the Kolmogorov-Smirnov test, within-group comparisons were performed with the Wilcoxon test, and between-group comparisons were performed with Mann-Whitney U and Kruskal-Wallis tests. Significance level was accepted as p < 0.05. In all groups, the demineralization values of the enamel surfaces in the gingival, proximal and occlusal surfaces adjacent to the brackets were significantly higher in the T1 period than in the T0 period (p < 0.05). In the T1 period of Gemini metal, Clarity self-ligating ceramic and Clarity advanced ceramic bracket groups, the demineralization values of the proximal enamel surfaces were found to be significantly higher than the Victory metal and APC Clarity Advanced ceramic bracket groups (p < 0.05). In the T1 period, the demineralization values of the occlusal enamel surfaces of the Victory metal, APC Clarity Advanced ceramic bracket groups and control group were significantly lower than the Gemini metal, Clarity self-ligating ceramic and Clarity Advanced ceramic bracket groups (p < 0.05). Significant increases in enamel demineralization values were observed as a consequence of increased retention areas for microbial dental plaque on enamel surfaces adjacent to the bracket. Considering the importance of minimizing enamel demineralization in fixed orthodontic treatments, less enamel demineralization in Victory metal and APC Clarity Advanced ceramic bracket groups showed that these brackets can be preferred in patients with poor oral hygiene.
ABSTRACT
The aim of this study was to evaluate the relationship between skeletal sagittal nasal profile morphology and sagittal skeletal malocclusions. Regarding lateral cephalometric films, the study was conducted in a total of 135 individuals without any prior orthodontic treatment (mean age of 17.91 ± 1.91), including 49 males (mean age 17.91 ± 1.16) and 86 females (mean age 17.78 ± 1.91 years). The groups were divided into two groups as male and female according to gender, and three groups as skeletal Class 1, Class 2, and Class 3 according to the Steiner's ANB angle. In addition, skeletal groups were compared within groups by dividing into two groups of male and female. A total of eight parameters, three skeletal sagittal angular (SNA, SNB, and ANB angles), four nasal linear (R-A, N-A, N-ANS, and N-R distances) and one nasal angular (N1-N2/N2-R angle), were measured on each cephalometric film. The arithmetic mean and standard deviation of all measured nasal parameters were calculated. For statistical analysis, independent sample t-test and one-way analysis of variance (One-Way ANOVA) were used for normally distributed data, and Mann Whitney U and Kruskal Wallis tests were used for data that did not show normal distribution. For statistical analysis, p < 0.05 was considered significant. R-A, N-A, and N-ANS linear nasal parameters differed significantly between the male and female groups, which were evaluated regardless of the skeletal groups, with a higher rate in males (p < 0.05). N-R linear nasal parameter showed a statistically significant difference between skeletal malocclusion groups, which were evaluated regardless of gender. N-R distance was found to be significantly longer in skeletal Class 3 individuals than in Class 1 and 2 individuals (p < 0.05). There was no statistically significant difference in nasal bone concavity angle in all groups (p > 0.05). R-A and N-A linear nasal parameters showed statistically significant differences between male and female sex groups in all skeletal malocclusion classes (p < 0.05). At first, results showed that males had longer measurements than females in all linear nasal parameters. Second, longer measurements were found in all linear nasal parameters in skeletal Class 3 individuals than those in skeletal Class 1 and Class 2 individuals. Third, the nasal bone concavity angle was greater in skeletal Class 2 individuals than the others.
ABSTRACT
(i) Objective: The present study aimed to compare the electrochemical corrosion resistance of six different types of fixed lingual retainer wires used as fixed retention appliances in an in vitro study. (ii) Methods: In the study, two different Ringer solutions, with pH 7 and pH 3.5, were used. Six groups were formed with five retainer wires in each group. In addition, 3-braided stainless steel, 6-braided stainless steel, Titanium Grade 1, Titanium Grade 5, Gold, and Dead Soft retainer wires were used. The corrosion current density (icorr), corrosion rate (CR), and polarization resistance (Rp) were determined from the Tafel polarization curves. (iii) Results: The corrosion current density of the Gold retainer group was statistically higher than the other retainer groups in both solutions (p < 0.05). The corrosion rate of the Dead Soft retainer group was statistically higher than the other retainer groups in both solutions (p < 0.05). The polarization resistance of the Titanium Grade 5 retainer group was statistically higher than the other retainer groups in both solutions (p < 0.05). As a result of Scanning Electron Microscope (SEM) images, pitting corrosion was not observed in the Titanium Grade 1, Titanium Grade 5 and Gold retainer groups, while pitting corrosion was observed in the other groups. (iv) Conclusion: From a corrosion perspective, although the study needs to be evaluated in vivo, the Titanium Grade 5 retainer group included is in this in vitro study may be more suitable for clinical use due to its high electrochemical corrosion resistance and the lack of pitting corrosion observed in the SEM images.
ABSTRACT
Bracket failure is one of the most important problems encountered during fixed orthodontic treatment. For this reason, different types of adhesive agents have been developed over the years. Consequently, the aim of this study was to evaluate the shear bond strength of brackets bonded to teeth etched with a conventional acid etching method in a laboratory environment by using different types of adhesive agents and comparing the number of shear strokes. Sixty human maxillary premolars were divided into three groups and Gemini stainless steel metal brackets (3M Unitek, Monrovia, CA, USA) were bonded to all teeth. In Group 1, Transbond™ XT Primer (3M Unitek, Monrovia, CA, USA) and Transbond™ XT Light Cure Adhesive Paste composite (3M Unitek, Monrovia, CA, USA) were used. In Group 2, BracePaste® MTP Primer (American Orthodontics, Sheboygan, CA, USA) and BracePaste® Adhesive composite (American Orthodontics, Sheboygan, WI, USA) were used. In Group 3, Ortho Solo™ Primer (Ormco, Orange, CA, USA) and Grengloo™ Adhesive composite (Ormco, Brea, CA, USA) were used. The samples were subjected to a shear test with a closed-loop controlled, low-cycle fatigue machine with a capacity of 10 N and a crosshead speed of 300 mm/min. The number of shear strokes of the brackets was recorded. According to the Kruskal−Wallis and Mann−Whitney U tests performed on the data obtained, statistically significant differences were found between the groups in terms of the numbers of shear strokes (p < 0.05). Significantly higher numbers of shear strokes and higher shear bond strengths were observed in Group 3 compared with Group 1 and Group 2 (p < 0.05). There was no statistically significant difference between the numbers of shear strokes for Group 1 and Group 2 samples (p > 0.05). To conclude the study, it was observed that the type of adhesive used had an effect on the bond strength of the bracket and that the Grengloo™ adhesive agent showed higher shear bond strength. It was observed that BracePaste® Adhesive and Transbond™ XT Light Cure Adhesive Paste adhesive agents had similar shear bond strengths.
ABSTRACT
Based on the development of many adhesive systems and bonding techniques, bonding strength of orthodontic brackets has become even more important in modern clinical orthodontics. The aim of this study was to determine mean shearing stroke frequency of different orthodontic bracket types and bonding agents under cycling loading. Therefore, 10 different types of orthodontic bracket from 4 different brands were divided into 2 groups. Two different adhesives, namely Transbond™ XT etch-and-rinse for Group 1 and Transbond™ Plus self-etching-primer adhesive for Group 2 were considered. The brackets were tested under cycling loading force of 10-N and a crosshead speed of 300 mm/min and 40 cycle/min. The frequency of strokes that the brackets failed were determined and these data were analyzed by statistical analysis using an independent sample t-test and one-way analysis of variance (ANOVA). The level of significance was set at p < 0.05. Generally, differences between the frequency of shearing strokes of the bracket failures were found to be statistically significant depending on the type of adhesives and brackets (p < 0.05). The bonding technique for Group 1 was found to have a significantly higher shear bonding strength than Group 2. It is also seen that different types of bracket belonging to the same or different brands had different shear bonding strength. It may be concluded that: (i) all bracket types used in this study can be applied with both bonding techniques, (ii) in order to minimize the risk of hard tissue damage, ceramic brackets should be carefully bonded using the self-etching primary adhesive technique.
ABSTRACT
Objective. The aim of this study is to evaluate the factors that affect wearing time and patient behavior during reverse pull headgear therapy with a newly designed reverse pull headgear. Methods. In clinical practice, new reverse pull headgears were applied to fifteen patients. The patients were monitored during reverse pull headgear therapy and the data were evaluated. Statistical analysis was made. Results. During the study, patients were monitored successfully and the evaluations showed that patients wear the new reverse pull headgears mostly at night. There are differences between days of week and hours of day. Weekends are more popular than weekdays for wearing reverse pull headgear. Conclusions. This new type of reverse pull headgears can be used successfully in clinical practice and can help the clinician. Study showed that the most important factor that affects the cooperation of reverse pull headgear patient is aesthetic appearance.
