ABSTRACT
3D-printed materials are present in numerous applications, from medicine to engineering. The aim of this study is to assess their suitability for an application of interest today, that of testing of 3D-printed polylactic acid (PLA)-based reactors for biogas production using anaerobic digestion. The impact of temperature, pH, and aqueous phase on the tested bioreactor is investigated, together with the effect of the gaseous phase (i.e., produced biogas). Two batches of materials used separately, one after another inside the bioreactor were considered, in a realistic situation. Two essential parameters inside the reactor (i.e., pH and temperature) were continuously monitored during a time interval of 25 to 30 days for each of the two biogas-generating processes. To understand the impact of these processes on the walls of the bioreactor, samples of 3D-printed material were placed at three levels: at the top (i.e., outside the substrate), in the middle, and at the bottom of the bioreactor. The samples were analyzed using a non-destructive imaging method, Optical Coherence Tomography (OCT). An in-house developed swept-source (SS) OCT system, master-slave (MS) enhanced, operating at a central wavelength of 1310 nm was utilized. The 3D OCT images related to the degradation level of the material of the PLA samples were validated using Scanning Electron Microscopy (SEM). The differences between the impact of the substrate on samples situated at the three considered levels inside the reactor were determined and analyzed using their OCT B-scans (optical cross-section images). Thus, the impact of the biogas-generating process on the interior of the bioreactor was demonstrated and quantified, as well as the capability of OCT to perform such assessments. Therefore, future work may target OCT for in situ investigations of such bioreactors.
ABSTRACT
BACKGROUND: Presently, different studies are conducted related to the topic of biomass potential to generate through anaerobic fermentation process alternative fuels supposed to support the existing fossil fuel resources, which are more and more needed, in quantity, but also in quality of so called green energy. The present study focuses on depicting an optional way of capitalizing agricultural biomass residues using anaerobic fermentation in order to obtain biogas with satisfactory characteristics.. The research is based on wheat bran and a mix of damaged ground grains substrates for biogas production. RESULTS: The information and conclusions delivered offer results covering the general characteristics of biomass used , the process parameters with direct impact over the biogas production (temperature regime, pH values) and the daily biogas production for each batch relative to the used material. CONCLUSIONS: All conclusions are based on processing of monitoring process results , with accent on temperature and pH influence on the daily biogas production for the two batches. The main conclusion underlines the fact that the mixture batch produces a larger quantity of biogas, using approximately the same process conditions and input, in comparison to alone analyzed probes, indicating thus a higher potential for the biogas production than the wheat bran substrate.Adrian Eugen Cioabla, Ioana Ionel, Gabriela-Alina Dumitrel and Francisc Popescu contributed equally to this work.
