NMR in the SPINE Structural Proteomics project.

This paper describes the developments, role and contributions of the NMR spectroscopy groups in the Structural Proteomics In Europe (SPINE) consortium. Focusing on the development of high-throughput (HTP) pipelines for NMR structure determinations of proteins, all aspects from sample preparation, data acquisition, data processing, data analysis to structure determination have been improved with respect to sensitivity, automation, speed, robustness and validation. Specific highlights are protonless (13)C-direct detection methods and inferential structure determinations (ISD). In addition to technological improvements, these methods have been applied to deliver over 60 NMR structures of proteins, among which are five that failed to crystallize. The inclusion of NMR spectroscopy in structural proteomics pipelines improves the success rate for protein structure determinations.

(15)N backbone dynamics of ferricytochrome b(562): comparison with the reduced protein and the R98C variant.

The backbone dynamics of ferricytochrome b(562), a four-helix bundle protein from Escherichia coli, have been studied by NMR spectroscopy. The consequences of the introduction of a c-type thioether linkage between the heme and protein and the reduction to the ferrous cytochrome have also been analyzed. (15)N relaxation rates R(1) and R(2) and (1)H-(15)N NOEs were measured at proton Larmor frequencies of 500 and 600 MHz for the oxidized and reduced protein as well as for the oxidized R98C variant. In the latter protein, an "artificial" thioether covalent bond has been introduced between the heme group and the protein frame [Arnesano, F., Banci, L., Bertini, I., Ciofi-Baffoni, S., de Lumley Woodyear, T., Johnson, C. M., and Barker, P. D. (2000) Biochemistry 39, 1499-1514]. The (15)N relaxation data were analyzed with the ModelFree protocol, and the mobility parameters on the picosecond to nanosecond time scale were compared for the three species. The three forms are rather rigid as a whole, with average generalized order parameters values of 0.87 +/- 0.08 (oxidized cytochrome b(562)), 0.84 +/- 0.07 (reduced cytochrome b(562)), and 0.85 +/- 0.07 (oxidized R98C cytochrome b(562)), indicating similar mobility for each system. Lower order parameters (S(2)) are found for residues belonging to loops 1 and 2. Higher mobility, as indicated by lower order parameters, is found for heme binding helices alpha 1 and alpha 4 in the R98C variant with respect to the wild-type protein. The analysis requires a relatively long rotational correlation time (tau(m) = 9.6 ns) whose value is accounted for on the basis of the anisotropy of the molecular shape and the high phosphate concentration needed to ensure the occurrence of monomer species. A parallel study of motions in the millisecond to microsecond time scale has also been performed on oxidized wild-type and R98C cytochrome b(562). In a CPMG experiment, decay rates were analyzed in the presence of spin-echo pulse trains of variable spacing. The dynamic behavior on this time scale is similar to that observed on the sub-nanosecond time scale, showing an increased mobility in the residues connected to the heme ligands in the R98C variant. It appears that the increased protein stability of the variant, established previously, is not correlated with an increase in rigidity.

Characterization of the binding interface between the copper chaperone Atx1 and the first cytosolic domain of Ccc2 ATPase.

The interaction of the copper chaperone Atx1 and the first cytosolic domain of Ccc2 ATPase, Ccc2a, was investigated by NMR in solution. In particular, a solution of Cu(I)-15NAtx1 was titrated with apo-Ccc2a, and, vice versa, a solution of Cu(I)-15NCcc2a was titrated with apo-Atx1. By following the 15N and 1H chemical shifts, a new species is detected in both experiments. This species is the same in both titrations and is in fast exchange with the parent species on the NMR time scale. Nuclear relaxation data are consistent with the formation of an adduct. Judging from the nuclear Overhauser effect spectroscopy patterns, the structure of Cu(I)-15NCcc2a in the presence of apo-Atx1 is not significantly altered, whereas Cu(I)-15NAtx1 in the presence of apo-Ccc2a experiences some changes with respect to both the apoproteins and the Cu(I)-loaded proteins. The structure of the Cu(I)-15NAtx1 moiety in the adduct was obtained from 1137 nuclear Overhauser effects to a final root mean square deviation to the mean structure of 0.76 +/- 0.13 A for the backbone and 1.11 +/- 0.11 A for the heavy atoms. 15N and 1H chemical shifts suggest the regions of interaction that, together with independent information, allow a structural model of the adduct to be proposed. The apo form of Atx1 displays significant mobility in loops 1 and 5, the N-terminal part of helix alpha1, and the C-terminal part of helix alpha2 on the ms-micros time scale. These regions correspond to the metal binding site. Such mobility is largely reduced in the free Cu(I)-Atx1 and in the adduct with apo-Ccc2a. The analogous mobility of Ccc2a in both Cu(I) and apo forms is reduced with respect to Atx1. Such an adduct is relevant as a structural and kinetic model for copper transfer from Atx1 to Ccc2a in physiological conditions.

Oxidation of a tetrameric nonphenolic lignin model compound by lignin peroxidase.

The present study maps the active site of lignin peroxidase in respect to substrate size using either fungal or recombinant wild type, as well as mutated, recombinant lignin peroxidases. A nonphenolic tetrameric lignin model was synthesized that contains beta-O-4 linkages. The fungal and recombinant wild type lignin peroxidase both oxidized the tetrameric model forming four products. The four products were identified by mass spectral analyses and compared with synthetic standards. They were identified as tetrameric, trimeric, dimeric, and monomeric carbonyl compounds. All four of these products were also formed from single turnover experiments. This indicates that lignin peroxidase is able to attack any of the C(alpha)-C(beta) linkages in the tetrameric compound and that the substrate-binding site is well exposed. Mutation of the recombinant lignin peroxidase (isozyme H8) in the heme access channel, which is relatively restricted and was previously proposed to be the veratryl alcohol-binding site (E146S), had little effect on the oxidation of the tetramer. In contrast, mutation of a Trp residue (W171S) in the alternate proposed substrate-binding site completely inhibited the oxidation of the tetrameric model. These results are consistent with lignin peroxidase having an exposed active site capable of directly interacting with the lignin polymer without the advent of low molecular weight mediators.

Solution structure of the yeast copper transporter domain Ccc2a in the apo and Cu(I)-loaded states.

Ccc2 is an intracellular copper transporter in Saccharomyces cerevisiae and is a physiological target of the copper chaperone Atx1. Here we describe the solution structure of the first N-terminal MTCXXC metal-binding domain, Ccc2a, both in the presence and absence of Cu(I). For Cu(I)-Ccc2a, 1944 meaningful nuclear Overhauser effects were used to obtain a family of 35 structures with root mean square deviation to the average structure of 0.36 +/- 0.06 A for the backbone and 0.79 +/- 0.05 A for the heavy atoms. For apo-Ccc2a, 1970 meaningful nuclear Overhauser effects have been used with 35 (3)J(HNHalpha) to obtain a family of 35 structures with root mean square deviation to the average structure of 0.38 +/- 0.06 A for the backbone and 0.82 +/- 0.07 A for the heavy atoms. The protein exhibits a betaalphabetabetaalphabeta, ferrodoxin-like fold similar to that of its target Atx1 and that of a human counterpart, the fourth metal-binding domain of the Menkes protein. The overall fold remains unchanged upon copper loading, but the copper-binding site itself becomes less disordered. The helical context of the copper-binding site, and the copper-induced conformational changes in Ccc2a differ from those in Atx1. Ccc2a presents a conserved acidic surface which complements the basic surface of Atx1 and a hydrophobic surface. These results open new mechanistic aspects of copper transporter domains with physiological copper donor and acceptor proteins.

Structural consequences of b- to c-type heme conversion in oxidized Escherichia coli cytochrome b562.

An NMR characterization of the 98Arg --> Cys variant of iron (III)-containing cytochrome b562 from Escherichia coli has been performed and the solution structure obtained. This variant has a covalent bond between the heme and Cys 98, thus mimicking the heme binding in cytochrome c. The R98C cytochrome is shown to have a significantly increased stability, compared to that of wild type, toward thermal and chemical denaturation. In water at 20 degrees C it is 5.60 kJ mol-1 more stable than the WT protein, measured by equilibrium guanidine hydrochloride denaturation. The structure has been obtained through two-dimensional total correlation spectroscopy (TOCSY) and nuclear Overhauser effect spectroscopy (NOESY) experiments and through three-dimensional NOESY-15N heteronuclear multiple quantum coherence (HMQC). By these methods, 85% of protons and 100% of backbone nitrogens were assigned. 2145 meaningful nuclear Overhauser effects (NOEs) (20 NOEs per residue), 45 backbone 3J values, and 397 pseudocontact shifts were used to obtain a family of 35 members, which were then energy-minimized. The root-mean-square deviation (RMSD) with respect to the average structure is 0.50 +/- 0.07 for the backbone and 1.01 +/- 0.08 for the heavy atoms. The magnetic anisotropy resulting from analysis of the pseudocontact shifts indicates an anisotropy that is an intermediate between that of the wild-type, which is the smallest, and cytochrome c. The g values confirm a higher anisotropy of the variant with respect to the wild-type protein. The chirality of the heme 2 alpha carbon is the same as that in all naturally occurring cytochromes c. The overall secondary structure and tertiary structure are very similar to the wild type. The removal of Arg 98 causes a change in the pH-dependent properties. The pKa, proposed to be due to deprotonation of the coordinated histidine, is 1.5 units higher than in the wild type, consistent with the lack of the positive charge of Arg 98 close to the ionizable group. This is further support for the coordinated histidine being the titratable group with an alkaline pKa in the wild-type protein. The pattern of the shifts of the heme methyl groups is different than in the wild-type protein, presumably due to alteration of the electronic structure by the presence of the covalent bond between the protein and the heme. The difference in stability between the variant and wild-type protein is discussed in terms of the structural information.

Lignin and Mn peroxidase-catalyzed oxidation of phenolic lignin oligomers.

The oxidation of phenolic oligomers by lignin and manganese peroxidases was studied by transient-state kinetic methods. The reactivity of peroxidase intermediates compound I and compound II was studied with the phenol guaiacol along with a beta-O-4 phenolic dimer, trimer, and tetramer. Compound I of both peroxidases is much more reactive than compound II. The rate constants for these substrates with Mn peroxidase compound I range from 1.0 x 10(5) M-1 s-1 for guaiacol to 1.1 x 10(3) M-1 s-1 for the tetramer. Reactivity is much higher with lignin peroxidase compound I with rate constants ranging from 1.2 x 10(6) M-1s-1 for guaiacol to 3.6 x 10(5) M-1 s-1 for the tetramer. Rate constants with compound II are much lower with Mn peroxidase exhibiting very little reactivity. The rate constants dramatically decreased with both peroxidases as the size of the substrate increased. The extent of the decrease was much more dramatic with Mn peroxidase, leading us to conclude that, despite its ability to oxidize phenols, Mn2+ is the only physiologically significant substrate. The rate decrease associated with increasing substrate size was more gradual with lignin peroxidase. These data indicate that whereas Mn peroxidase cannot efficiently directly oxidize the lignin polymer, lignin peroxidase is well suited for direct oxidation of polymeric lignin.