Modulation of Transaminase Activity by Encapsulation in Temperature-Sensitive Poly(N-acryloyl glycinamide) Hydrogels.

Smart hydrogels hold much potential for biocatalysis, not only for the immobilization of enzymes, but also for the control of enzyme activity. We investigated upper critical solution temperature-type poly N-acryloyl glycinamide (pNAGA) hydrogels as a smart matrix for the amine transaminase from Bacillus megaterium (BmTA). Physical entrapment of BmTA in pNAGA hydrogels results in high immobilization efficiency (>89 %) and high activity (97 %). The temperature-sensitiveness of pNAGA is preserved upon immobilization of BmTA and shows a gradual deswelling upon temperature reduction. While enzyme activity is mainly controlled by temperature, deactivation tended to be higher for immobilized BmTA (≈62-68 %) than for free BmTA (≈44 %), suggesting a deactivating effect due to deswelling of the pNAGA gel. Although the deactivation in response to hydrogel deswelling is not yet suitable for controlling enzyme activity sufficiently, it is nevertheless a good starting point for further optimization.

Publisher Correction: The choice of biopolymer is crucial to trigger angiogenesis with vascular endothelial growth factor releasing coatings.

A Correction to this paper has been published: https://doi.org/10.1007/s10856-020-06463-w.

The choice of biopolymer is crucial to trigger angiogenesis with vascular endothelial growth factor releasing coatings.

Bio-based coatings and release systems for pro-angiogenic growth factors are of interest to overcome insufficient vascularization and bio-integration of implants. This study compares different biopolymer-based coatings on polyethylene terephthalate (PET) membranes in terms of coating homogeneity and stability, coating thickness in the swollen state, endothelial cell adhesion, vascular endothelial growth factor (VEGF) release and pro-angiogenic properties. Coatings consisted of carbodiimide cross-linked gelatin type A (GelA), type B (GelB) or albumin (Alb), and heparin (Hep), or they consisted of radically cross-linked gelatin methacryloyl-acetyl (GM5A5) and heparin methacrylate (HepM5). We prepared films with thicknesses of 8-10 µm and found that all coatings were homogeneous after washing. All gelatin-based coatings enhanced the adhesion of primary human endothelial cells compared to the uncoated membrane. The VEGF release was tunable with the loading concentration and dependent on the isoelectric points and hydrophilicities of the biopolymers used for coating: GelA-Hep showed the highest releases, while releases were indistinguishable for GelB-Hep and Alb-Hep, and lowest for GM5A5-HepM5. Interestingly, not only the amount of VEGF released from the coatings determined whether angiogenesis was induced, but a combination of VEGF release, metabolic activity and adhesion of endothelial cells. VEGF releasing GelA-Hep and GelB-Hep coatings induced angiogenesis in a chorioallantoic membrane assay, so that these coatings should be considered for further in vivo testing.

Stimulus-Responsive Regulation of Enzyme Activity for One-Step and Multi-Step Syntheses.

Multi-step biocatalytic reactions have gained increasing importance in recent years because the combination of different enzymes enables the synthesis of a broad variety of industrially relevant products. However, the more enzymes combined, the more crucial it is to avoid cross-reactivity in these cascade reactions and thus achieve high product yields and high purities. The selective control of enzyme activity, i.e., remote on-/off-switching of enzymes, might be a suitable tool to avoid the formation of unwanted by-products in multi-enzyme reactions. This review compiles a range of methods that are known to modulate enzyme activity in a stimulus-responsive manner. It focuses predominantly on in vitro systems and is subdivided into reversible and irreversible enzyme activity control. Furthermore, a discussion section provides indications as to which factors should be considered when designing and choosing activity control systems for biocatalysis. Finally, an outlook is given regarding the future prospects of the field.

Beyond the Modification Degree: Impact of Raw Material on Physicochemical Properties of Gelatin Type A and Type B Methacryloyls.

Gelatin methacryloyl (acetyl) (GM(A)) is increasingly investigated for various applications in life sciences and medicine, for example, drug release or tissue engineering. Gelatin type A and type B are utilized for GA M(A) and GB M(A) preparation, but the impact of gelatin raw material on modification reaction and resulting polymer properties is rather unknown so far. Therefore, the degrees of modification (DMA) and physicochemical properties of five GA M(A) and GB M(A) derivatives are compared: The degrees of methacryloylation (0.32-0.98 mmol g-1 ) are indistinguishable for GA M(A) and GB M(A) as are the sol-gel temperatures. Isoelectric points, solution viscosities, and hydrodynamic radii which are distinct for GA and GB, converge with increasing DMA. Interestingly, differences are measured for the storage moduli and equilibrium degrees of swelling of respective GA and GB derivative-based hydrogels, in spite of their comparable DMA. This underlines the importance of GM(A) characterization beyond the modification degree.

Photoinduced Cleavage and Hydrolysis of o-Nitrobenzyl Linker and Covalent Linker Immobilization in Gelatin Methacryloyl Hydrogels.

Light-induced release systems can be triggered remotely and are of interest for many controlled release applications due to the possibility for spatio-temporal release control. In this study a biotin-functionalized photocleavable macromer is incorporated with an o-nitrobenzyl moiety into gelatin methacryloyl(-acetyl) hydrogels via radical cross-linking. Stronger immobilization of streptavidin-coupled horseradish peroxidase occurs in linker-functionalized hydrogels compared to pure gelatin methacryloyl(-acetyl) hydrogels, and a controlled release of the streptavidin conjugate upon UV-irradiation is possible. Liquid chromatography coupled to mass spectrometry (LC-MS) analysis of aqueous linker solutions allows the identification of the main cleavage products and the cleavage kinetics. Thus, it is shown that a significant hydrolysis of the linker occurs at 37 °C. Nevertheless the system reported here is a promising controlled release scaffold for proteins and application in tissue engineering, if background releases of the immobilized drug are tolerable.

Interactions of methacryloylated gelatin and heparin modulate physico-chemical properties of hydrogels and release of vascular endothelial growth factor.

Gelatin hydrogels are used as tissue engineering scaffolds and systems for controlled release due to their inherent biodegradability and biocompatibility. In this study gelatin methacryloyl(-acetyl) (GM/A) with various degrees of methacryloylation (DM) and methacryl-modified heparin (HepM) were cross-linked radically via thermal-redox initiation. Investigation of gel yields (79.4%-85.8%) and equilibrium degrees of swelling (EDS; 564.8%-750.3%) by an experimental design approach suggested interaction effects between the applied HepM mass fraction and the DM of gelatin. HepM reduced the cross-linking effectivity (gel yield) only when added to GM with low DM (83% without HepM, 79% with HepM) but not when added to GM with high DM. For EDS combined impacts of the physical and chemical nature of the applied biopolymers are indicated: the elevated hydrophilicity and low cross-linking potential of HepM enhanced EDS in GM gels with low DM (Ø 1.1-fold increase), and lowered the storage moduli of all GM formulations (Ø 1.2-fold decrease). Vascular endothelial growth factor (VEGF) loading before cross-linking of gels resulted in major loss of functional growth factor (Ø 0.5% release), while loading after cross-linking was successful and significant release was detected over 28 days (6.4%-10.4% release). Release kinetics were mainly controlled by the VEGF concentration used for loading, and thus VEGF release and physico-chemical properties of the hydrogels can be tuned independently from each other in a broad range.

Quantification of Substitution of Gelatin Methacryloyl: Best Practice and Current Pitfalls.

Cross-linkable gelatin methacryloyl (GM) is widely used for the generation of artificial extracellular matrix (ECM) in tissue engineering. However, the quantification of modified groups in GM is still an unsolved issue, although this is the key factor for tailoring the physicochemical material properties. In this contribution, 1H-13C-HSQC NMR spectra are used to gain detailed structural information on GMs and of 2-fold modified gelatin containing methacryloyl and acetyl groups (GMAs). Distinctive identification of methacrylate, methacrylamide, and acetyl groups present in GMs and GMAs revealed an overlap of methacrylamide and modified hydroxyproline signals in the 1H NMR spectrum. Considering this, we suggest a method to quantify methacrylate and methacrylamide groups in GMs precisely based on simple 1H NMR spectroscopy with an internal standard. Quantification of acetylation in GMAs is also possible, yet, 2D NMR spectra are necessary. The described methods allow direct quantification of modified groups in gelatin derivatives, making them superior to other, indirect methods known so far.

Controlled Release of Vascular Endothelial Growth Factor from Heparin-Functionalized Gelatin Type A and Albumin Hydrogels.

Bio-based release systems for pro-angiogenic growth factors are of interest, to overcome insufficient vascularization and bio-integration of implants. In this study, we investigated heparin-functionalized hydrogels based on gelatin type A or albumin as storage and release systems for vascular endothelial growth factor (VEGF). The hydrogels were crosslinked using carbodiimide chemistry in presence of heparin. Heparin-functionalization of the hydrogels was monitored by critical electrolyte concentration (CEC) staining. The hydrogels were characterized in terms of swelling in buffer solution and VEGF-containing solutions, and their loading with and release of VEGF was monitored. The equilibrium degree of swelling (EDS) was lower for albumin-based gels compared to gelatin-based gels. EDS was adjustable with the used carbodiimide concentration for both biopolymers. Furthermore, VEGF-loading and release were dependent on the carbodiimide concentration and loading conditions for both biopolymers. Loading of albumin-based gels was higher compared to gelatin-based gels, and its burst release was lower. Finally, elevated cumulative VEGF release after 21 days was determined for albumin-based hydrogels compared to gelatin A-based hydrogels. We consider the characteristic net charges of the proteins and degradation of albumin during release time as reasons for the observed effects. Both heparin-functionalized biomaterial systems, chemically crosslinked gelatin type A or albumin, had tunable physicochemical properties, and can be considered for controlled delivery of the pro-angiogenic growth factor VEGF.