Angle selective backscattered electron contrast in the low-voltage scanning electron microscope: Simulation and experiment for polymers.

Recently developed detectors can deliver high resolution and high contrast images of nanostructured carbon based materials in low voltage scanning electron microscopes (LVSEM) with beam deceleration. Monte Carlo Simulations are also used to predict under which exact imaging conditions purely compositional contrast can be obtained and optimised. This allows the prediction of the electron signal intensity in angle selective conditions for back-scattered electron (BSE) imaging in LVSEM and compares it to experimental signals. Angle selective detection with a concentric back scattered (CBS) detector is considered in the model in the absence and presence of a deceleration field, respectively. The validity of the model prediction for both cases was tested experimentally for amorphous C and Cu and applied to complex nanostructured carbon based materials, namely a Poly(N-isopropylacrylamide)/Poly(ethylene glycol) Diacrylate (PNIPAM/PEGDA) semi-interpenetration network (IPN) and a Poly(3-hexylthiophene-2,5-diyl) (P3HT) film, to map nano-scale composition and crystallinity distribution by avoiding experimental imaging conditions that lead to a mixed topographical and compositional contrast.

Photochemically modified diamond-like carbon surfaces for neural interfaces.

Diamond-like carbon (DLC) was modified using a UV functionalization method to introduce surface-bound amine and aldehyde groups. The functionalization process rendered the DLC more hydrophilic and significantly increased the viability of neurons seeded to the surface. The amine functionalized DLC promoted adhesion of neurons and fostered neurite outgrowth to a degree indistinguishable from positive control substrates (glass coated with poly-L-lysine). The aldehyde-functionalized surfaces performed comparably to the amine functionalized surfaces and both additionally supported the adhesion and growth of primary rat Schwann cells. DLC has many properties that are desirable in biomaterials. With the UV functionalization method demonstrated here it may be possible to harness these properties for the development of implantable devices to interface with the nervous system.

Amine functionalized nanodiamond promotes cellular adhesion, proliferation and neurite outgrowth.

In this study, we report the production of amine functionalized nanodiamond. The amine functionalized nanodiamond forms a conformal monolayer on a negatively charged surface produced via plasma polymerization of acrylic acid. Nanodiamond terminated surfaces were studied as substrates for neuronal cell culture. NG108-15 neuroblastoma-glioma hybrid cells were successfully cultured upon amine functionalized nanodiamond coated surfaces for between 1 and 7 d. Additionally, primary dorsal root ganglion (DRG) neurons and Schwann cells isolated from Wistar rats were also successfully cultured over a period of 21 d illustrating the potential of the coating for applications in the treatment of peripheral nerve injury.

Two-photon polymerization-generated and micromolding-replicated 3D scaffolds for peripheral neural tissue engineering applications.

In this study, we explore the production of well-defined macroscopic scaffolds with two-photon polymerization (2PP) and their use as neural tissue engineering scaffolds. We also demonstrate that these 3D scaffolds can be replicated via soft lithography, which increases production efficiency. Photopolymerizable polylactic acid (PLA) was used to produce scaffolds by 2PP and soft lithography. We assessed the biocompatibility of these scaffolds using an SH-SY5Y human neuronal cell line and primary cultured rat Schwann cells (of direct relevance to the repair of nerve injuries). A Comet assay with SH-SY5Y human neuronal cells revealed minimal DNA damage after washing the photocured material for 7 days in ethanol. Additionally, thin films and 3D scaffolds of the photocured PLA sustained a high degree of Schwann cell purity (99%), enabled proliferation over 7 days and provided a suitable substrate for supporting Schwann cell adhesion such that bi-polar and tri-polar morphologies were observed. Evidence of orthogonally aligned and organized actin thin filaments and the formation of focal contacts were observed for the majority of Schwann cells. In summary, this work supports the use of PLA as a suitable material for supporting Schwann cell growth and in turn use of 3D soft lithography for the synthesis of neural scaffolds in nerve repair.

Direct laser writing of 3D scaffolds for neural tissue engineering applications.

This study reports on the production of high-resolution 3D structures of polylactide-based materials via multi-photon polymerization and explores their use as neural tissue engineering scaffolds. To achieve this, a liquid polylactide resin was synthesized in house and rendered photocurable via attaching methacrylate groups to the hydroxyl end groups of the small molecular weight prepolymer. This resin cures easily under UV irradiation, using a mercury lamp, and under femtosecond IR irradiation. The results showed that the photocurable polylactide (PLA) resin can be readily structured via direct laser write (DLW) with a femtosecond Ti:sapphire laser and submicrometer structures can be produced. The maximum resolution achieved is 800 nm. Neuroblastoma cells were grown on thin films of the cured PLA material, and cell viability and proliferation assays revealed good biocompatibility of the material. Additionally, PC12 and NG108-15 neuroblastoma growth on bespoke scaffolds was studied in more detail to assess potential applications for neuronal implants of this material.

Phosphorus carbides: theory and experiment.

The recent finding that radio frequency plasma activation of CH(4)/PH(3) gas mixtures can yield films with P : C ratios < or = 3 has served to trigger further research into new 'phosphorus carbide' materials. Theoretical and experimental results relating to periodic and amorphous materials, respectively, are presented here: (i) The electronic structure and stability of different crystalline phosphorus carbide P(x)C(y) phases have been studied using first-principles density-functional theory. Calculations have been carried out for P(4)C(3+8 n) (n= 0-4), PC, and PC(3) and the most likely periodic structures examined in detail. Particular attention is paid to the composition PC(3), for which there are several possibilities of similar energy. (ii) Recent experimental efforts have involved use of pulsed laser ablation methods to produce hydrogen-free phosphorus carbide thin films. Mechanically hard, electrically conducting diamond like carbon films containing 0- approximately 26 at.% P have been deposited on both Si and quartz substrates by 193 nm PLA of graphite/phosphorus targets (containing varying percentages of phosphorus), at a range of substrate temperatures (T(sub)= 298-700 K), in vacuum, and analysed via laser Raman and X-ray photoelectron spectroscopy.