Local Activities of Hydroxide and Water Determine the Operation of Silver-Based Oxygen Depolarized Cathodes.

Local ion activity changes in close proximity to the surface of an oxygen depolarized cathode (ODC) were measured by scanning electrochemical microscopy (SECM). While the operating ODC produces OH- ions and consumes O2 and H2 O through the electrocatalytic oxygen reduction reaction (ORR), local changes in the activity of OH- ions and H2 O are detected by means of a positioned Pt microelectrode serving as an SECM tip. Sensing at the Pt tip is based on the pH-dependent reduction of PtO and obviates the need for prior electrode modification steps. It can be used to evaluate the coordination numbers of OH- ions and H2 O, and the method was exploited as a novel approach of catalyst activity assessment. We show that the electrochemical reaction on highly active catalysts can have a drastic influence on the reaction environment.

Shape-controlled electrodeposition of single Pt nanocrystals onto carbon nanoelectrodes.

In this paper, we report the electrosynthesis and characterization of individual, shape-controlled Pt nanocrystals (NCs) electrodeposited on carbon nanoelectrodes (CNEs). Single Pt NCs were deposited onto the CNEs using an empirically developed square-wave potential program. Characterization by scanning electron microscopy indicates that the sizes of Pt NCs are remarkably reproducible (relative standard deviation = 6%). Electrochemically active surface areas, determined by Cu underpotential deposition and H adsorption/desorption analyses, are also reproducible. Selected area electron diffraction indicates that each Pt NC is comprised of just one single crystal (no grain boundaries). Although different square-wave potential programs lead to different types of crystals, the Pt NCs discussed here have a concave hexoctahedral geometry bound primarily by {13 6 2} surface facets. The results in this report represent a first step toward our ultimate goal of studying electrocatalysis at individual, shape-controlled, single-crystal nanoparticles.

Monitoring Cobalt-Oxide Single Particle Electrochemistry with Subdiffraction Accuracy.

By partially overcoming the diffraction limit, superlocalization techniques have extended the applicability of optical techniques down to the nanometer size-range. Herein, cobalt oxide-based nanoparticles are electrochemically grown onto carbon nanoelectrodes and their individual catalytic properties are evaluated through a combined electrochemical-optical approach. Using dark-field white light illumination, edges superlocalization techniques are applied to quantify changes in particle size during electrochemical activation with down to 20 nm precision. It allows the monitoring of (i) the anodic electrodeposition of cobalt hydroxide material and (ii) the large and reversible volume expansion experienced by the cobalt hydroxide particle during its oxidation. Meanwhile, the particle light scattering provides chemical information such as the Co redox state transformation, which complements both the particle size and the recorded electrochemical current and provides in operando mechanistic information on particle electrocatalytic properties.

Local Surface Modifications Investigated by Combining Scanning Electrochemical Microscopy and Surface-Enhanced Raman Scattering.

Scanning electrochemical microscopy (SECM) is coupled with surface-enhanced Raman scattering (SERS) microscopy to characterize local surface modifications. SECM is utilized for the surface patterning of para-nitrothiophenol self-assembled monolayers (SAMs) in the direct mode of SECM with a subsequent readout of the chemical patterns by means of combined SECM-SERS. The SECM-SERS combination allows monitoring of local electrochemical processes and provides simultaneous complementary spectroscopic information. The reaction products upon SAM reduction, specifically p-aminothiophenol groups, are distinguished from the pristine SAM and locally ruptured areas.

Size Stability and H2/CO Selectivity for Au Nanoparticles during Electrocatalytic CO2 Reduction.

In this paper, we show that Au nanoparticles (AuNPs) stabilized with either citrate or by low-generation dendrimers rapidly grow during electrocatalytic reduction of CO2. For example, citrate-stabilized AuNPs and AuNPs encapsulated within sixth-generation, hydroxyl-terminated, poly(amidoamine) dendrimers (G6-OH DENs) having diameters of ∼2 nm grow substantially in size (to 6-7 nm) and polydispersity during just 15 min of electrolysis at -0.80 V (vs RHE). This degree of instability makes it impossible to correlate the structure of AuNPs determined prior to electrocatalysis to their catalytic function. In contrast to the G6-OH dendrimer, the higher generation G8-OH analogue stabilizes AuNPs under the same conditions that lead to instability of the other two materials. More specifically, G8-OH DENs having an initial size of 1.7 ± 0.3 nm increase to only 2.2 ± 0.5 nm during electrolysis in 0.10 M NaHCO3 at -0.80 V (vs RHE). Even when the electrolysis is carried out at -1.20 V, the higher-generation dendrimer stabilizes encapsulated AuNPs. This is presumably due to the compactness of the periphery of the G8-OH dendrimer. Although the G8-OH dendrimer nearly eliminates AuNP growth, the surface of the AuNP is still accessible for electrocatalytic reactions. The smaller, more stable G8-OH DENs strongly favor formation of H2 over CO. Some previous reports have suggested that AuNPs in the ∼2 nm size range yield primarily CO, but we believe these findings are a consequence of the growth of the AuNPs during catalysis and do not reflect the true function of ∼2 nm AuNPs.

Opto-electrochemical In Situ Monitoring of the Cathodic Formation of Single Cobalt Nanoparticles.

Single-particle electrochemistry at a nanoelectrode is explored by dark-field optical microscopy. The analysis of the scattered light allows in situ dynamic monitoring of the electrodeposition of single cobalt nanoparticles down to a radius of 65 nm. Larger sub-micrometer particles are directly sized optically by super-localization of the edges and the scattered light contains complementary information concerning the particle redox chemistry. This opto-electrochemical approach is used to derive mechanistic insights about electrocatalysis that are not accessible from single-particle electrochemistry.

The oxygen reduction reaction at the three-phase boundary: nanoelectrodes modified with Ag nanoclusters.

Silver nanoclusters are deposited on bifunctional Θ-shaped nanoelectrodes consisting of a carbon nanoelectrode combined with a hollow nanopipette. The Θ-nanoelectrodes are used as model systems to study interfacial mass transport in gas diffusion electrodes and in particular oxygen-depolarized cathodes (ODC) for the oxygen reduction reaction (ORR) in chlor-alkali electrolysers. By local delivery of O2 gas to the electroactive Ag nanoclusters through the adjacent nanopipette, enhanced currents for the ORR at the Ag nanoparticles are recorded which are not accountable when considering the low solubility and slow diffusion of O2 in highly alkaline media. Instead, local oversaturation of O2 leads to current enhancement at the Ag nanoclusters. Due to the intrinsic high mass transport rates at the nanometric electrodes accompanied by local delivery of reactants, the method generally allows to study electrochemical reactions at single nanoparticles beyond the limitations induced by slow diffusion and low reactant concentration. Kinetic and mechanistic information, for instance derived from Tafel slopes, can be obtained from kinetic regimes not accessible to standard techniques.

Spearhead Nanometric Field-Effect Transistor Sensors for Single-Cell Analysis.

Nanometric field-effect-transistor (FET) sensors are made on the tip of spear-shaped dual carbon nanoelectrodes derived from carbon deposition inside double-barrel nanopipettes. The easy fabrication route allows deposition of semiconductors or conducting polymers to comprise the transistor channel. A channel from electrodeposited poly pyrrole (PPy) exhibits high sensitivity toward pH changes. This property is exploited by immobilizing hexokinase on PPy nano-FETs to give rise to a selective ATP biosensor. Extracellular pH and ATP gradients are key biochemical constituents in the microenvironment of living cells; we monitor their real-time changes in relation to cancer cells and cardiomyocytes. The highly localized detection is possible because of the high aspect ratio and the spear-like design of the nano-FET probes. The accurately positioned nano-FET sensors can detect concentration gradients in three-dimensional space, identify biochemical properties of a single living cell, and after cell membrane penetration perform intracellular measurements.

Nanoelectrodes reveal the electrochemistry of single nickelhydroxide nanoparticles.

Individual Ni(OH)2 nanoparticles deposited on carbon nanoelectrodes are investigated in non-ensemble measurements with respect to their energy storage properties and electrocatalysis for the oxygen evolution reaction (OER). Charging by oxidation of Ni(OH)2 is limited by the diffusion of protons into the particle bulk and the OER activity is independent of the particle size.

Non-destructive Patterning of Carbon Electrodes by Using the Direct Mode of Scanning Electrochemical Microscopy.

Patterning of glassy carbon surfaces grafted with a layer of nitrophenyl moieties was achieved by using the direct mode of scanning electrochemical microscopy (SECM) to locally reduce the nitro groups to hydroxylamine and amino functionalities. SECM and atomic force microscopy (AFM) revealed that potentiostatic pulses applied to the working electrode lead to local destruction of the glassy carbon surface, most likely caused by etchants generated at the positioned SECM tip used as the counter electrode. By applying galvanostatic pulses, and thus, limiting the current during structuring, corrosion of the carbon surface was substantially suppressed. After galvanostatic patterning, unambiguous proof of the formation of the anticipated amino moieties was possible by modulation of the pH value during the feedback mode of SECM imaging. This patterning strategy is suitable for the further bio-modification of microstructured surfaces. Alkaline phosphatase, as a model enzyme, was locally bound to the modified areas, thus showing that the technique can be used for the development of protein microarrays.

Doping Level of Boron-Doped Diamond Electrodes Controls the Grafting Density of Functional Groups for DNA Assays.

The impact of different doping levels of boron-doped diamond on the surface functionalization was investigated by means of electrochemical reduction of aryldiazonium salts. The grafting efficiency of 4-nitrophenyl groups increased with the boron levels (B/C ratio from 0 to 20,000 ppm). Controlled grafting of nitrophenyldiazonium was used to adjust the amount of immobilized single-stranded DNA strands at the surface and further on the hybridization yield in dependence on the boron doping level. The grafted nitro functions were electrochemically reduced to the amine moieties. Subsequent functionalization with a succinic acid introduced carboxyl groups for subsequent binding of an amino-terminated DNA probe. DNA hybridization significantly depends on the probe density which is in turn dependent on the boron doping level. The proposed approach opens new insights for the design and control of doped diamond surface functionalization for the construction of DNA hybridization assays.

Assembling Paramagnetic Ceruloplasmin at Electrode Surfaces Covered with Ferromagnetic Nanoparticles. Scanning Electrochemical Microscopy in the Presence of a Magnetic Field.

Adsorption of ceruloplasmin (Cp) at a gold electrode modified with ferromagnetic iron nanoparticles encapsulated in carbon (Fe@C Nps) leads to a successful immobilization of the enzyme in its electroactive form. The proper placement of Cp at the electrode surface on top of the nanocapsules containing an iron core allowed a preorientation of the enzyme, hence allowing direct electron transfer between the electrode and the enzyme. Laser ablation coupled with inductively coupled plasma mass spectrometry indicated that Cp was predominantly located at the paramagnetic nanoparticles. Scanning electrochemical microscopy measurements in the sample-generation/tip-collection mode proved that Cp was ferrooxidative inactive if it was immobilized on the bare gold surface and reached the highest activity if it was adsorbed on Fe@C Nps in the presence of a magnetic field.

Electrochemical nanoprobes for single-cell analysis.

The measurement of key molecules in individual cells with minimal disruption to the biological milieu is the next frontier in single-cell analyses. Nanoscale devices are ideal analytical tools because of their small size and their potential for high spatial and temporal resolution recordings. Here, we report the fabrication of disk-shaped carbon nanoelectrodes whose radius can be precisely tuned within the range 5-200 nm. The functionalization of the nanoelectrode with platinum allowed the monitoring of oxygen consumption outside and inside a brain slice. Furthermore, we show that nanoelectrodes of this type can be used to impale individual cells to perform electrochemical measurements within the cell with minimal disruption to cell function. These nanoelectrodes can be fabricated combined with scanning ion conductance microscopy probes, which should allow high resolution electrochemical mapping of species on or in living cells.

Scanning droplet cell for chemoselective patterning through local electroactivation of protected quinone monolayers.

A reagentless strategy for template-free patterning of uniformly inert surfaces is suggested. A layer of p-hydroquinone (HQ) protected by the tert-butyldimethylsilyl (TBDMS) group is electrografted onto glassy carbon electrodes. Chemoselective activation is performed through electrochemically controlled cleavage of the TBDMS group, which yields the redox-active surface-confined quinone moieties. The latter are shown to undergo electrochemically induced Michael addition, which serves for subsequent functionalization of the electrode surface. Patterning of the TBDMS-quinone-modified surface is accomplished by using selective localized cleavage of the protecting group. State-of-the-art direct-mode scanning electrochemical microscopy (SECM) patterning fails to yield the anticipated interfacial reaction; however, the electrochemical scanning droplet cell (SDC) is capable of conducting the localized chemoselective reaction. In a small area, dictated by the dimensions of the droplet, electrochemically induced cleavage of the protecting group can be performed locally to give rise to arrays of active quinone spots. Upon deprotection, the redox signals, attributed to the hydroquinone/benzoquinone couple, provide the first direct evidence for chemoselective electrochemical patterning of sensitive functionalities. Subsequent SECM studies of the resulting modified areas demonstrate spatial control of the proposed patterning technique.