Comparative study of the gular gland of three species of Molossidae bats (Mammalia: Chiroptera) from South America.

The gular gland is a skin gland located in the suprasternal region of adult males of some bat families. Knowledge of the morphology and functional aspects of these gland types is often limited. This study aimed to describe the structure and composition of the gular glands of three molossid species (Eumops patagonicus, Molossus fluminensis and Molossus molossus) with respect to their reproductive activity and to define the mechanism involved in secretion release. Different histological, histochemical and immunohistochemical techniques were used to achieve these goals. The results revealed that the size and composition of this gland are variable and are mostly related to the lipid content during the reproductive season. The results also documented, for the first time, the occurrence of mechanoreceptors associated with the surface of the glandular duct by detecting an S100 protein, indicating that an external stimulus activates secretion. Previous studies on other species have classified the gland using obsolete criteria; hence, we adopted a new classification of adenomeres in this study. Moreover, we investigated the gland secretion mechanism previously proposed. This study defines the implications of this gland in the reproduction of this species. Our preliminary interpretation of the function of the gular gland is that it is a cutaneous exocrine gland activated by mechanoreceptors involved in the reproductive behaviour of the Molossidae family.

Optimization Methodology for Additive Manufacturing of Customized Parts by Fused Deposition Modeling (FDM). Application to a Shoe Heel.

Additive manufacturing technologies offer important new manufacturing possibilities, but its potential is so big that only with the support of other technologies can it really be exploited. In that sense, parametric design and design optimization tools appear as two appropriate complements for additive manufacturing. Synergies existing between these three technologies allow for integrated approaches to the design of customized and optimized products. While additive manufacturing makes it possible to materialize overly complex geometries, parametric design allows designs to be adapted to custom characteristics and optimization helps to choose the best solution according to the objectives. This work represents an application development of a previous work published in Polymers which exposed the general structure, operation and opportunities of a methodology that integrates these three technologies by using visual programming with Grasshopper. In this work, the different stages of the methodology and the way in which each one modifies the final design are exposed in detail, applying it to a case study: the design of a shoe heel for FDM-an interesting example both from the perspectives of ergonomic and mass customization. Programming, operation and results are exposed in detail showing the complexity, usefulness and potential of the methodology, with the aim of helping other researchers to develop proposals in this line.

Integration of Additive Manufacturing, Parametric Design, and Optimization of Parts Obtained by Fused Deposition Modeling (FDM). A Methodological Approach.

The use of current computer tools in both manufacturing and design stages breaks with the traditional conception of productive process, including successive stages of projection, representation, and manufacturing. Designs can be programmed as problems to be solved by using computational tools based on complex algorithms to optimize and produce more effective solutions. Additive manufacturing technologies enhance these possibilities by providing great geometric freedom to the materialization phase. This work presents a design methodology for the optimization of parts produced by additive manufacturing and explores the synergies between additive manufacturing, parametric design, and optimization processes to guide their integration into the proposed methodology. By using Grasshopper, a visual programming application, a continuous data flow for parts optimization is defined. Parametric design tools support the structural optimization of the general geometry, the infill, and the shell structure to obtain lightweight designs. Thus, the final shapes are obtained as a result of the optimization process which starts from basic geometries, not from an initial design. The infill does not correspond to pre-established patterns, and its elements are sized in a non-uniform manner throughout the piece to respond to different local loads. Mass customization and Fused Deposition Modeling (FDM) systems represent contexts of special potential for this methodology.

Nutritional deficiency and placenta calcification underlie constitutive, selective embryo loss in pregnant South American plains vizcacha, Lagostomus maximus (Rodentia, Caviomorpha).

Plains vizcacha females are able to ovulate up to 800 oocytes per estrus cycle. However, just 10-12 embryos are implanted and only two of them, those located nearest the cervix, are gestated to term. Between 26 and 70 days post-coitum, a constitutive resorption occurs from the embryos located proximal to the ovary, extending progressively toward those distally implanted. Our previous studies on the dynamics of gestation in L. maximus, led us to hypothesize some kind of placental and nutritional insufficiency as the basis for the resorption process. We analyzed histology and arterial architecture of the reproductive tract in pregnant and non-pregnant females. Uterine horns are irrigated through the uterine artery, a branch of the internal iliac artery, in an ascending way from the cervix; segmental arteries irrigating the embryo vesicles become thinner as they approach the ovary. Contrast solution administered during angiographies accumulated in the placenta of embryos closest to cervix. Thus, blood stream favors the embryos nearest the cervix, indicating a gradual nutritional deficiency of those closest to the ovary. Besides, placenta becomes calcified early, at mid-gestation, during the resorption process. Finally, the detection of specialized endothelial venules and inflammatory cells suggest the concurrent participation of immunological processes in embryo vesicles undergoing resorption.

Considerations on the Applicability of Test Methods for Mechanical Characterization of Materials Manufactured by FDM.

The lack of specific standards for characterization of materials manufactured by Fused Deposition Modelling (FDM) makes the assessment of the applicability of the test methods available and the analysis of their limitations necessary; depending on the definition of the most appropriate specimens on the kind of part we want to produce or the purpose of the data we want to obtain from the tests. In this work, the Spanish standard UNE 116005:2012 and international standard ASTM D638-14:2014 have been used to characterize mechanically FDM samples with solid infill considering two build orientations. Tests performed according to the specific standard for additive manufacturing UNE 116005:2012 present a much better repeatability than the ones according to the general test standard ASTM D638-14, which makes the standard UNE more appropriate for comparison of different materials. Orientation on-edge provides higher strength to the parts obtained by FDM, which is coherent with the arrangement of the filaments in each layer for each orientation. Comparison with non-solid specimens shows that the increase of strength due to the infill is not in the same proportion to the percentage of infill. The values of strain to break for the samples with solid infill presents a much higher deformation before fracture.

The Influence of Manufacturing Parameters on the Mechanical Behaviour of PLA and ABS Pieces Manufactured by FDM: A Comparative Analysis.

This paper presents a comparative study of the tensile mechanical behaviour of pieces produced using the Fused Deposition Modelling (FDM) additive manufacturing technique with respect to the two types of thermoplastic material most widely used in this technique: polylactide (PLA) and acrylonitrile butadiene styrene (ABS). The aim of this study is to compare the effect of layer height, infill density, and layer orientation on the mechanical performance of PLA and ABS test specimens. The variables under study here are tensile yield stress, tensile strength, nominal strain at break, and modulus of elasticity. The results obtained with ABS show a lower variability than those obtained with PLA. In general, the infill percentage is the manufacturing parameter of greatest influence on the results, although the effect is more noticeable in PLA than in ABS. The test specimens manufactured using PLA perform more rigidly and they are found to have greater tensile strength than ABS. The bond between layers in PLA turns out to be extremely strong and is, therefore, highly suitable for use in additive technologies. The methodology proposed is a reference of interest in studies involving the determination of mechanical properties of polymer materials manufactured using these technologies.

Effects of different sucrose concentrations on vitrified porcine preantral follicles: Qualitative and quantitative analysis.

The aim of the present study was to perform a qualitative and quantitative analysis of the effect of different sucrose concentrations combined with ethylene glycol in the preservation of vitrified porcine preantral follicles. Fragments of ovarian cortex were vitrified in cryotubes containing 200 µl of the vitrification solution (30% Ethylene Glycol; 20% Fetal Bovine Serum; 0 M-0.25 M - 0.75 M or 1 M sucrose) and stored in liquid nitrogen for a week. Histological analysis showed that after vitrification the number of normal follicles decreased compared to the fresh tissue (control). The percentage of normal primordial follicles was sucrose dose dependent. The percentage of normal primary follicles was similar in 0 M or 0.25 M sucrose, while higher concentrations (0.75 M and 1 M) increased significantly the percentage of abnormal follicles (p < 0.05). Morphometric analysis showed a statistically significant reduction in the total area of primordial follicles with 0.75 M sucrose and a significant increase in the cytoplasmic area of primordial follicles with 0 M sucrose (p < 0.05). The qualitative and the quantitative analysis appear to be a complementary tool when choosing a vitrification protocol. For our cryopreservation system - vitrification of ovarian cortex slices in cryotubes-the best vitrification medium was TCM 199-Hepes with 30% de ethylene glycol, 20% of Fetal Bovine Serum and 0 or 0.25 M sucrose. The present study shows that the use of high sucrose concentrations in the vitrification solution has a deleterious effect on the preservation of porcine preantral follicles contained in ovarian tissue. Consequently, its use at 0.75 M or 1 M wouldn't be recommended.

Determination of Actual Friction Factors in Metal Forming under Heavy Loaded Regimes Combining Experimental and Numerical Analysis.

Tribological conditions can change drastically during heavy loaded regimes as experienced in metal forming; this is especially critical when lubrication can only be applied at the early stage of the process because the homogeneous lubricant layer can break along the die-workpiece interface. In these cases, adopting a constant friction factor for the lubricant-surface pair may not be a valid assumption. This paper presents a procedure based on the use of dual friction factor maps to determine friction factors employed in heavy loaded regimes. A finite element (FE) simulation is used to obtain the friction factor map for the alloy UNS A96082. Experiments were conducted using four lubricants (aluminum anti-size, MoS2 grease, silicone oil, and copper paste) to determine the actual friction curves. The experimental procedure is based on the application of lubricant only at the beginning of the first stage of ring compression, and not at intermediate stages as is usual in typical ring compression tests (RCTs). The results show that for small reductions (rh < 20%), the conventional RCT can be applied because the tribological conditions remain similar. For large reductions (rh > 20%), it is recommended to obtain an average value of the friction factor for every lubricant-surface pair in the range of deformation considered.

Histological seasonal changes in ovaries of Spotted tinamous (Nothura maculosa Tinamidae, Temminck, 1815) related to gonadotrope population / Cambios histológicos estacionales en ovarios de perdiz común (Nothura maculosa Tinamidae, Temminck, 1815)) y su relación con la población de gonadotropas

Nothura maculosa is a South American Tinamidae with a marked seasonal reproductive pattern. This work describes ovarian seasonal changes in this species related to gonadotrope (GTHs) population. Ovary and pituitary samples were collected monthly from adult birds during four annual periods. They were fixed in Bouin's solution and processed for light microscopy. The data of post-fixation gonadal weight were analysed using STATISTIX 4.0. Histological sections of the ovaries were stained with H/E, PAS and Goldner-Masson trichrome. Single and double immunostaining were applied on pituitary sections with anti-chicken-FSH and anti-chicken-LH antibodies. The samples were analysed in quarterly periods of the year, Pl: March-May (resting stage); P2: June-August (developing stage); P3: September-November (reproductive stage); P4: December-February (involutive stage). Ovary weight (ow) significantly varied among periods (p<0.001). During Pl, only primordial and previtellogenic follicles were observed, ow 0.09±0.01 g (n=25); during P2, developing follicles with signs of vitellogenesis were detected, ow 0.13+0.01 g (n=14); during P3, maximum follicular development was found, ow 0.9 +/- 0.15 g (n=39); P4 exhibited great variability in follicular stages, ow 0.18+0.18 g (n=19). Involutive atresia was observed in all the periods, while bursting atresia and post-ovulatory follicles were only characterized at P3 and P4. The GTHs containing few LH and FSH immunoreactive (ir) granules were predominant during P1-P2. The GTHs with LH ir granules were abundant in intermediate zone and caudal lobe in P3 and P4 while few cells contained both types of granules. The number of FSH cells was increased during P3 and P4. The histological ovarían changes were narrowly correlated with the variations in the gonadotrope population.

Nothura maculosa es un tinámido sudamericano que presenta marcada estacionalidad reproductiva. Este trabajo describe los cambios estacionales del ovario de esta especie, en relación con la población de gonadotropas (GTHs). Muestras de ovarios y pituitarias de ejemplares adultos fueron colectadas mensualmente durante cuatro años; se fijaron en solución de Bouin y procesadas para M.O. Los datos del peso gonadal posfijación fueron analizados usando STATISTIX 4.0. Los cortes de ovarios fueron coloreados con H/E, P.A.S. y Tricrómico de Goldner-Masson. En cortes de adenohipófisis se aplicó inmunocitoquímica simple y doble (sistema ABC, Vector Lab.), empleando anticuerpos anti-pollo FSH y anti-pollo LH. Las muestras se analizaron en períodos trimestrales de cada año (P): Pl: Marzo-Abril-Mayo (etapa de reposo), P2: Junio-Julio-Agosto (etapa de desarrollo), P3: Septiembre-Octubre-Noviembre (etapa reproductiva), P4: Diciembre-Enero-Febrero (etapa involutiva). El peso de los ovarios (PO) varió significativamente entre los periodos (p< 0.001). Durante Pl, sólo se observaron folículos primordiales y pre-vitelogénicos, PO 0.09 +/- 0.01 g (n=25); durante P2, se detectaron folículos en desarrollo con signos de vitelogénesis, PO 0.13+0.01 g (n=14); durante P3, se encontró máximo desarrollo folicular, PO 0.90+0.15 g (n=39); P4 exhibió gran variabilidad folicular, PO 0.18+0.18 g (n=19). La atresia involutiva se observó en todos los períodos, mientras que la atresia explosiva y los folículos postovulatorios caracterizaron a P3 y P4. Las GTHs conteniendo escasos granulos LH y FSH inmunoreactivos (ir) predominaron durante Pl y P2. Las GTHs con granulos LH¡> eran abundantes en la zona intermedia y en el lóbulo caudal en P3 y P4 mientras que escasas células contenían ambos tipos de granulos. El número de células FSH¡> se incrementó durante P3 y P4. Los cambios histológicos del ovario se correlacionaron estrechamente con las variaciones en la población de gonadotropas.