Efficiency Assessment between Entrapment and Covalent Bond Immobilization of Mutant ß-Xylosidase onto Chitosan Support.

The Y509E mutant of ß-xylosidase from Geobacillus stearothermophilus (XynB2Y509E) (which also bears xylanase activity) has been immobilized in chitosan spheres through either entrapment or covalent bond formation methods. The maximum immobilization yield by entrapment was achieved by chitosan beads developed using a 2% chitosan solution after 1 h of maturation time in CFG buffer with ethanol. On the other hand, the highest value in covalent bond immobilization was observed when employing chitosan beads that were prepared from a 2% chitosan solution after 4 h of activation in 1% glutaraldehyde solution at pH 8. The activity expressed after immobilization by covalent bonding was 23% higher compared to the activity expressed following entrapment immobilization, with values of 122.3 and 99.4 IU.g-1, respectively. Kinetic data revealed that catalytic turnover values were decreased as compared to a free counterpart. Both biocatalysts showed increased thermal and pH stability, along with an improved storage capacity, as they retained 88% and 40% of their activity after being stored at 4 °C for two months. Moreover, XynB2Y509E immobilized by covalent binding also exhibited outstanding reusability, retaining 92% of activity after 10 cycles of reuse. In conclusion, our results suggest that the covalent bond method appears to be the best choice for XynB2Y509E immobilization.

Characterization of Cross-Linked Enzyme Aggregates of the Y509E Mutant of a Glycoside Hydrolase Family 52 ß-xylosidase from G. stearothermophilus.

Cross-linked enzyme aggregates (CLEAs) of the Y509E mutant of glycoside hydrolase family 52 ß-xylosidase from Geobacillus stearothermophilus with dual activity of ß-xylosidase and xylanase (XynB2Y509E) were prepared. Ammonium sulfate was used as the precipitant agent, and glutaraldehyde as cross-linking agent. The optimum conditions were found to be 90% ammonium sulfate, 12.5 mM glutaraldehyde, 3 h of cross-linking reaction at 25 °C, and pH 8.5. Under these (most effective) conditions, XynB2Y509E-CLEAs retained 92.3% of their original ß-xylosidase activity. Biochemical characterization of both crude and immobilized enzymes demonstrated that the maximum pH and temperature after immobilization remained unchanged (pH 6.5 and 65 °C). Moreover, an improvement in pH stability and thermostability was also found after immobilization. Analysis of kinetic parameters shows that the K m value of XynB2Y509E-CLEAs obtained was slightly higher than that of free XynB2Y509E (1.2 versus 0.9 mM). Interestingly, the xylanase activity developed by the mutation was also conserved after the immobilization process.

Biochemical and Mutational Characterization of N-Succinyl-Amino Acid Racemase from Geobacillus stearothermophilus CECT49.

N-Succinyl-amino acid racemase (NSAAR), long referred to as N-acyl- or N-acetyl-amino acid racemase, is an enolase superfamily member whose biotechnological potential was discovered decades ago, due to its use in the industrial dynamic kinetic resolution methodology first known as "Acylase Process". In previous works, an extended and enhanced substrate spectrum of the NSAAR from Geobacillus kaustophilus CECT4264 toward different N-substituted amino acids was reported. In this work, we describe the cloning, purification, and characterization of the NSAAR from Geobacillus stearothermophilus CECT49 (GstNSAAR). The enzyme has been extensively characterized, showing a higher preference toward N-formyl-amino acids than to N-acetyl-amino acids, thus confirming that the use of the former substrates is more appropriate for a biotechnological application of the enzyme. The enzyme showed an apparent thermal denaturation midpoint of 77.0 ± 0.1 °C and an apparent molecular mass of 184 ± 5 kDa, suggesting a tetrameric species. Optimal parameters for the enzyme activity were pH 8.0 and 55-65 °C, with Co(2+) as the most effective cofactor. Mutagenesis and binding experiments confirmed K166, D191, E216, D241, and K265 as key residues in the activity of GstNSAAR, but not indispensable for substrate binding.

Enzymatic dynamic kinetic resolution of racemic N-formyl- and N-carbamoyl-amino acids using immobilized L-N-carbamoylase and N-succinyl-amino acid racemase.

Taking advantage of the catalytic promiscuity of L-carbamoylase from Geobacillus stearothermophilus CECT43 (BsLcar) and N-succinyl-amino acid racemase from Geobacillus kaustophilus CECT4264 (GkNSAAR), we have evaluated the production of different optically pure L-α-amino acids starting from different racemic N-formyl- and N-carbamoyl-amino acids using a dynamic kinetic resolution approach. The enzymes were immobilized on two different solid supports, resulting in improved stability of the enzymes in terms of thermostability and storage when compared to the enzymes in solution. The bienzymatic system retained up to 80% conversion efficiency after 20 weeks at 4 °C and up to 90% after 1 week at 45 °C. The immobilization process also resulted in a great enhancement of the activity of BsLcar toward N-formyl-tryptophan, showing for the first time that substrate specificity of L-carbamoylases can be influenced by this approach. The system was effective for the biosynthesis of natural and unnatural L-amino acids (enantiomeric excess (e.e.) >99.5%), such as L-methionine, L-alanine, L-tryptophan, L-homophenylalanine, L-aminobutyric acid, and L-norleucine, with a higher performance toward N-formyl-α-amino acid substrates. Biocatalyst reuse was studied, and after 10 reaction cycles, over 75% activity remained.

Biochemical and mutational studies of allantoinase from Bacillus licheniformis CECT 20T.

Allantoinases (allantoin amidohydrolase, E.C. 3.5.2.5) catalyze the hydrolysis of the amide bond of allantoin to form allantoic acid, in those organisms where allantoin is not the final product of uric acid degradation. Despite their importance in the purine catabolic pathway, sequences of microbial allantoinases with proven activity are scarce, and only the enzyme from Escherichia coli (AllEco) has been studied in detail in the genomic era. In this work, we report the cloning, purification and characterization of the recombinant allantoinase from Bacillus licheniformis CECT 20T (AllBali). The enzyme was a homotetramer with an apparent Tm of 62 ± 1 °C. Optimal parameters for the enzyme activity were pH 7.5 and 50 °C, showing apparent Km and kcat values of 17.7 ± 2.7 mM and 24.4 ± 1.5 s(-1), respectively. Co(2+) proved to be the most effective cofactor, inverting the enantioselectivity of AllBali when compared to that previously reported for other allantoinases. The common ability of different cyclic amidohydrolases to hydrolyze distinct substrates to the natural one also proved true for AllBali. The enzyme was able to hydrolyze hydantoin, dihydrouracil and 5-ethyl-hydantoin, although at relative rates 3-4 orders of magnitude lower than with allantoin. Mutagenesis experiments suggest that S292 is likely implicated in the binding of the allantoin ring through the carbonyl group of the polypeptide main chain, which is the common mechanism observed in other members of the amidohydrolase family. In addition, our results suggest an allosteric effect of H2O2 toward allantoinase.

Mutational and structural analysis of L-N-carbamoylase reveals new insights into a peptidase M20/M25/M40 family member.

N-Carbamoyl-L-amino acid amidohydrolases (L-carbamoylases) are important industrial enzymes used in kinetic resolution of racemic mixtures of N-carbamoyl-amino acids due to their strict enantiospecificity. In this work, we report the first L-carbamoylase structure belonging to Geobacillus stearothermophilus CECT43 (BsLcar), at a resolution of 2.7 Å. Structural analysis of BsLcar and several members of the peptidase M20/M25/M40 family confirmed the expected conserved residues at the active site in this family, and site-directed mutagenesis revealed their relevance to substrate binding. We also found an unexpectedly conserved arginine residue (Arg(234) in BsLcar), proven to be critical for dimerization of the enzyme. The mutation of this sole residue resulted in a total loss of activity and prevented the formation of the dimer in BsLcar. Comparative studies revealed that the dimerization domain of the peptidase M20/M25/M40 family is a "small-molecule binding domain," allowing further evolutionary considerations for this enzyme family.

Stability and binding of the phosphorylated species of the N-terminal domain of enzyme I and the histidine phosphocarrier protein from the Streptomyces coelicolor phosphoenolpyruvate:sugar phosphotransferase system.

The phosphotransferase system (PTS) is involved in the use of carbon sources in bacteria. It is formed by two general proteins: enzyme I (EI) and the histidine phosphocarrier (HPr), and various sugar-specific permeases. EI is formed by two domains, with the N-terminal domain (EIN) being responsible for the binding to HPr. In low-G+C Gram-positive bacteria, HPr becomes phosphorylated not only by phosphoenolpyruvate (PEP) at the active-site histidine, but also by ATP at a serine. In this work, we have characterized: (i) the stability and binding affinities between the active-site-histidine phosphorylated species of HPr and the EIN from Streptomyces coelicolor; and (ii) the stability and binding affinities of the species involving the phosphorylation at the regulatory serine of HPr(sc). Our results show that the phosphorylated active-site species of both proteins are less stable than the unphosphorylated counterparts. Conversely, the Hpr-S47D, which mimics phosphorylation at the regulatory serine, is more stable than wild-type HPr(sc) due to helical N-capping effects, as suggested by the modeled structure of the protein. Binding among the phosphorylated and unphosphorylated species is always entropically driven, but the affinity and the enthalpy vary widely.

Engineering cyclic amidases for non-natural amino acid synthesis.

Hydantoinases/dihydropyrimidinases are important biotechnological enzymes involved in the production of α- and ß-amino acids. Their isolation from new sources with different substrate specificities, improved activity, enantioselectivity, or higher stability continues to be of great industrial interest. Here, we provide a detailed description of how to produce high quantities of the recombinant hydantoinase/dihydropyrimidinase enzyme from Sinorhizobium meliloti CECT4114 (SmeDhp). Several techniques are combined to obtain this goal, from cloning to activity measurement by HPLC.

Biochemical and mutational studies of the Bacillus cereus CECT 5050T formamidase support the existence of a C-E-E-K tetrad in several members of the nitrilase superfamily.

Formamidases (EC 3.5.1.49) are poorly characterized proteins. In spite of this scarce knowledge, ammonia has been described as playing a central role in the pathogenesis of human pathogens such as Helicobacter pylori, for which formamidase has been shown to participate in the nitrogen metabolic pathway. Sequence analysis has revealed that at least two different groups of formamidases are classified as EC 3.5.1.49: on the one hand, the derivatives of the FmdA-AmdA superfamily, which are the best studied to date, and on the other hand, the derivatives of Helicobacter pylori AmiF. Here we present the cloning, purification, and characterization of a recombinant formamidase from Bacillus cereus CECT 5050T (BceAmiF), the second member of the AmiF subfamily to be characterized, showing new features of the enzyme further supporting its relationship with aliphatic amidases. We also present homology modeling-based mutational studies confirming the importance of the Glu140 and Tyr191 residues in the enzymatic activities of the AmiF family. Moreover, we can conclude that a second glutamate residue is critical in several members of the nitrilase superfamily, meaning that what has consistently been identified as a C-E-K triad is in fact a C-E-E-K tetrad.

Evaluation of substrate promiscuity of an L-carbamoyl amino acid amidohydrolase from Geobacillus stearothermophilus CECT43.

N-carbamoyl-amino-acid amidohydrolase (also known as N-carbamoylase) is the stereospecific enzyme responsible for the chirality of the D- or L-amino acid obtained in the "Hydantoinase Process." This process is based on the dynamic kinetic resolution of D,L-5-monosubstituted hydantoins. In this work, we have demonstrated the capability of a recombinant L-N-carbamoylase from the thermophilic bacterium Geobacillus stearothermophilus CECT43 (BsLcar) to hydrolyze N-acetyl and N-formyl-L-amino acids as well as the known N-carbamoyl-L-amino acids, thus proving its substrate promiscuity. BsLcar showed faster hydrolysis for N-formyl-L-amino acids than for N-carbamoyl and N-acetyl-L-derivatives, with a catalytic efficiency (k(cat)/K(m)) of 8.58 x 10(5), 1.83 x 10(4), and 1.78 x 10(3) (s(-1) M(-1)), respectively, for the three precursors of L-methionine. Optimum reaction conditions for BsLcar, using the three N-substituted-L-methionine substrates, were 65 degrees C and pH 7.5. In all three cases, the metal ions Co(2+), Mn(2+), and Ni(2+) greatly enhanced BsLcar activity, whereas metal-chelating agents inhibited it, showing that BsLcar is a metalloenzyme. The Co(2+)-dependent activity profile of the enzyme showed no detectable inhibition at high metal ion concentrations.

Natural occurrence and industrial applications of D-amino acids: an overview.

Interest in D-amino acids has increased in recent decades with the development of new analytical methods highlighting their presence in all kingdoms of life. Their involvement in physiological functions, and the presence of metabolic routes for their synthesis and degradation have been shown. Furthermore, D-amino acids are gaining considerable importance in the pharmaceutical industry. The immense amount of information scattered throughout the literature makes it difficult to achieve a general overview of their applications. This review summarizes the state-of-the-art on D-amino acid applications and occurrence, providing both established and neophyte researchers with a comprehensive introduction to this topic.

Carbamoylases: characteristics and applications in biotechnological processes.

Enzymatic kinetic resolution is a widely used biotechnological tool for the production of enantiomerically pure/enriched compounds. This technique takes advantage of the enantioselectivity or enantiospecificity of an enzyme for one of the enantiomers of a racemic substrate to isolate the desired isomer. N-Carbamoyl-D- and L-amino acid amidohydrolases (D- and L-carbamoylases) are model enzymes for this procedure due to their strict enantiospecificity. Carbamoylase-based kinetic resolution of amino acids has been applied for the last three decades, allowing the production of optically pure D- or L-amino acids. Furthermore, this enzyme has become crucial in the industrially used multienzymatic system known as "Hydantoinase Process," where the kinetic resolution produced by coupling an enantioselective hydantoinase and the enantiospecific carbamoylase is enhanced by the enzymatic/chemical dynamic kinetic resolution of the low-rate hydrolyzed substrate. This review outlines the properties of D- and L-carbamoylases, emphasizing their biochemical/structural characteristics and their biotechnological applications. It also pinpoints new applications for the exploitation of carbamoylases over the forthcoming years.

Structure of dihydropyrimidinase from Sinorhizobium meliloti CECT4114: new features in an amidohydrolase family member.

The recombinant dihydropyrimidinase from Sinorhizobium meliloti CECT4114 (SmelDhp) has been characterised and its crystal structure elucidated at 1.85A. The global architecture of the protein is reminiscent of that of the amidohydrolase superfamily, consisting of two domains; an (alpha/beta)(8) TIM-like barrel domain, where the catalytic centre is located, and a smaller beta-sheet sandwich domain of unknown function. The c-terminal tails of each subunit extend toward another monomer in a swapping-like manner, creating a hydrogen bond network which suggests its implication in protein oligomerisation. Mutational and structural evidence suggest the involvement of a conserved tyrosine in the reaction mechanism of the enzyme. SmelDhp presents both hydantoinase and dihydropyrimidinase activities, with higher affinity for the natural six-membered ring substrates. For the five-membered ring substrates, affinity was greater for those with aliphatic and apolar groups in the 5th carbon atom, with the highest rates of hydrolysis for d-5-methyl and d-5-ethyl hydantoin (k(cat)/K(m)=2736+/-380 and 944+/-52M(-1)s(-1), respectively). The optimal conditions for the enzyme activity were found to be 60 degrees C of temperature at pH 8.0. SmelDhp retains 95% of its activity after 6-hour preincubation at 60 degrees C. This is the first dihydropyrimidinase used for the hydrolytic opening of non-natural 6-monosubstituted dihydrouracils, which may be exploited for the production of beta-amino acids.

Potential application of N-carbamoyl-beta-alanine amidohydrolase from Agrobacterium tumefaciens C58 for beta-amino acid production.

An N-carbamoyl-beta-alanine amidohydrolase of industrial interest from Agrobacterium tumefaciens C58 (beta car(At)) has been characterized. Beta car(At) is most active at 30 degrees C and pH 8.0 with N-carbamoyl-beta-alanine as a substrate. The purified enzyme is completely inactivated by the metal-chelating agent 8-hydroxyquinoline-5-sulfonic acid (HQSA), and activity is restored by the addition of divalent metal ions, such as Mn(2+), Ni(2+), and Co(2+). The native enzyme is a homodimer with a molecular mass of 90 kDa from pH 5.5 to 9.0. The enzyme has a broad substrate spectrum and hydrolyzes nonsubstituted N-carbamoyl-alpha-, -beta-, -gamma-, and -delta-amino acids, with the greatest catalytic efficiency for N-carbamoyl-beta-alanine. Beta car(At) also recognizes substrate analogues substituted with sulfonic and phosphonic acid groups to produce the beta-amino acids taurine and ciliatine, respectively. Beta car(At) is able to produce monosubstituted beta(2)- and beta(3)-amino acids, showing better catalytic efficiency (k(cat)/K(m)) for the production of the former. For both types of monosubstituted substrates, the enzyme hydrolyzes N-carbamoyl-beta-amino acids with a short aliphatic side chain better than those with aromatic rings. These properties make beta car(At) an outstanding candidate for application in the biotechnology industry.

Crystallization and preliminary crystallographic studies of the recombinant L-N-carbamoylase from Geobacillus stearothermophilus CECT43.

N-Carbamoyl-L-amino-acid amidohydrolases (L-N-carbamoylases; EC 3.5.1.87) hydrolyze the carbon-nitrogen bond of the ureido group in N-carbamoyl-L-alpha-amino acids. These enzymes are commonly used in the production of optically pure natural and non-natural L-amino acids using the ;hydantoinase process'. Recombinant L-N-carbamoylase from Geobacillus stearothermophilus CECT43 has been expressed, purified and crystallized by hanging-drop vapour diffusion. X-ray data were collected to a resolution of 2.75 A. The crystals belonged to space group P2(1)2(1)2, with unit-cell parameters a = 103.2, b = 211.7, c = 43.1 A and two subunits in the asymmetric unit.

Crystallization and preliminary crystallographic studies of an active-site mutant hydantoin racemase from Sinorhizobium meliloti CECT4114.

A recombinant active-site mutant of hydantoin racemase (C76A) from Sinorhizobium meliloti CECT 4114 (SmeHyuA) has been crystallized in the presence and absence of the substrate D,L-5-isopropyl hydantoin. Crystals of the SmeHyuA mutant suitable for data collection and structure determination were grown using the counter-diffusion method. X-ray data were collected to resolutions of 2.17 and 1.85 A for the free and bound enzymes, respectively. Both crystals belong to space group R3 and contain two molecules of SmeHyuA per asymmetric unit. The crystals of the free and complexed SmeHyuA have unit-cell parameters a = b = 85.43, c = 152.37 A and a = b = 85.69, c = 154.38 A, crystal volumes per protein weight (V(M)) of 1.94 and 1.98 A3 Da(-1) and solvent contents of 36.7 and 37.9%, respectively.

Recombinant polycistronic structure of hydantoinase process genes in Escherichia coli for the production of optically pure D-amino acids.

Two recombinant reaction systems for the production of optically pure D-amino acids from different D,L-5-monosubstituted hydantoins were constructed. Each system contained three enzymes, two of which were D-hydantoinase and D-carbamoylase from Agrobacterium tumefaciens BQL9. The third enzyme was hydantoin racemase 1 for the first system and hydantoin racemase 2 for the second system, both from A. tumefaciens C58. Each system was formed by using a recombinant Escherichia coli strain with one plasmid harboring three genes coexpressed with one promoter in a polycistronic structure. The D-carbamoylase gene was cloned closest to the promoter in order to obtain the highest level of synthesis of the enzyme, thus avoiding intermediate accumulation, which decreases the reaction rate. Both systems were able to produce 100% conversion and 100% optically pure D-methionine, D-leucine, D-norleucine, D-norvaline, D-aminobutyric acid, D-valine, D-phenylalanine, D-tyrosine, and D-tryptophan from the corresponding hydantoin racemic mixture. For the production of almost all D-amino acids studied in this work, system 1 hydrolyzed the 5-monosubstituted hydantoins faster than system 2.

Crystallization and preliminary crystallographic studies of the recombinant dihydropyrimidinase from Sinorhizobium meliloti CECT4114.

Dihydropyrimidinases are involved in the reductive pathway of pyrimidine degradation, catalysing the hydrolysis of 5,6-dihydrouracil and 5,6-dihydrothymine to the corresponding N-carbamoyl beta-amino acids. This enzyme has often been referred to as hydantoinase owing to its industrial application in the production of optically pure amino acids starting from racemic mixtures of 5-monosubstituted hydantoins. Recombinant dihydropyrimidinase from Sinorhizobium meliloti CECT4114 (SmelDhp) has been expressed, purified and crystallized. Crystallization was performed using the counter-diffusion method with capillaries of 0.3 mm inner diameter. Crystals of SmelDhp suitable for data collection and structure determination were grown in the presence of agarose at 0.1%(w/v) in order to ensure mass transport controlled by diffusion. X-ray data were collected to a resolution of 1.85 A. The crystal belongs to the orthorhombic space group C222(1), with unit-cell parameters a = 124.89, b = 126.28, c = 196.10 A and two molecules in the asymmetric unit. A molecular-replacement solution has been determined and refinement is in progress.

Thermodynamic and mutational studies of l-N-carbamoylase from Sinorhizobium meliloti CECT 4114 catalytic centre.

Purified site-directed mutants of Sinorhizobium meliloti CECT 4114 l-N-carbamoylase (SmLcar) in which Glu132, His230, Asn279 and Arg292 were replaced have been studied by kinetic methods and isothermal titration calorimetry (ITC). The importance of His230, Asn279 and Arg292 residues in the recognition of N-carbamoyl-l-alpha-amino acids has been proved. The role of Glu132 has been confirmed in substrate hydrolysis. ITC has confirmed two Ni atoms per monomer of wild type enzyme, and two equal and independent substrate binding sites (one per monomer). Homology modelling of SmLcar supports the importance of His87, His194, His386, Glu133 and Asp98 in metal binding. A comprehensive reaction mechanism is proposed on the basis of binding experiments measured by ITC, kinetic assays, and homology of the active centre with beta-alanine synthase from Saccharomyces kluyveri and other enzymes.

Enzymatic activity assay of D-hydantoinase by isothermal titration calorimetry. Determination of the thermodynamic activation parameters for the hydrolysis of several substrates.

Isothermal titration calorimetry (ITC) has been applied to the determination of the activity of D-hydantoinase (EC 3.5.2.2) with several substrates by monitoring the heat released during the reaction. The method is based on the proportionality between the reaction rate and the thermal power (heat/time) generated. Microcalorimetric assays carried out at different temperatures provided the dependence of the catalytic rate constant on temperature. We show that ITC assay is a nondestructive method that allows the determination of the catalytic rate constant (kcat), Michaelis constant (KM), activation energy and activation Gibbs energy, enthalpy and entropy of this reaction.