Energy Level Tuning of Non-Fullerene Acceptors in Organic Solar Cells.

The use of non-fullerene acceptors in organic photovoltaic (OPV) devices could lead to enhanced efficiencies due to increased open-circuit voltage (VOC) and improved absorption of solar light. Here we systematically investigate planar heterojunction devices comprising peripherally substituted subphthalocyanines as acceptors and correlate the device performance with the heterojunction energetics. As a result of a balance between VOC and the photocurrent, tuning of the interface energy gap is necessary to optimize the power conversion efficiency in these devices. In addition, we explore the role of the charge transport layers in the device architecture. It is found that non-fullerene acceptors require adjusted buffer layers with aligned electron transport levels to enable efficient charge extraction, while the insertion of an exciton-blocking layer at the anode interface further boosts photocurrent generation. These adjustments result in a planar-heterojunction OPV device with an efficiency of 6.9% and a VOC above 1 V.

Root-cause failure analysis of photocurrent loss in polythiophene:fullerene-based inverted solar cells.

Metal oxide transport layers have played a crucial role in recent progress in organic photovoltaic (OPV) device stability. Here, we measure the stability of inverted and encapsulated polythiophene:fullerene cells with MoO3/Ag/Al composite anode in operational conditions combining solar radiation and 65 °C. Performance loss of over 50% in the first 100 h of the aging is dominated by a drop in the short-circuit current (Jsc). We reveal a concurrent loss in reflectance from 85% to 50% above 650 nm, which is below the optical gap of the used photoactive materials, hence, excluding any major degradation in the bulk of this layer. Correlating the responses of aged devices to a series of test structures comprised of ITO/ZnO cathode, MoO3/Ag, and MoO3/Ag/Al anodes and their combinations with the active layer allowed us to identify that the presence of Al causes the reduced reflectance in these devices, independent of the presence of the active layer. Systematic single-stress aging on the test structures further indicates that elevated heat is the cause of the reflectance loss. Cross-section transmission electron microscopy coupled with elemental analysis revealed the unsuspected role of Al; notably, it diffuses through the entire 150 nm thick Ag layer and accumulates at the MoO3/Ag interface. Moreover, XRD analysis of the aged MoO3/Ag/Al anode indicates the formation of Ag2Al alloy. Depth profiling with X-ray photoelectron spectroscopy advanced our understanding by confirming the formation of Ag-Al intermetallic alloy and the presence of oxidized Al only at the MoO3/Ag interface suggesting a concomitant reduction of MoO3 to most probably MoO2. This latter compound is less reflective than MoO3, which can explain the reduced reflectance in aged devices as proven by optical simulations. On the basis of these results, we could estimate that 20% of the loss in Jsc is ascribed to reduction of MoO3 triggered by its direct contact with Al.

8.4% efficient fullerene-free organic solar cells exploiting long-range exciton energy transfer.

In order to increase the power conversion efficiency of organic solar cells, their absorption spectrum should be broadened while maintaining efficient exciton harvesting. This requires the use of multiple complementary absorbers, usually incorporated in tandem cells or in cascaded exciton-dissociating heterojunctions. Here we present a simple three-layer architecture comprising two non-fullerene acceptors and a donor, in which an energy-relay cascade enables an efficient two-step exciton dissociation process. Excitons generated in the remote wide-bandgap acceptor are transferred by long-range Förster energy transfer to the smaller-bandgap acceptor, and subsequently dissociate at the donor interface. The photocurrent originates from all three complementary absorbing materials, resulting in a quantum efficiency above 75% between 400 and 720 nm. With an open-circuit voltage close to 1 V, this leads to a remarkable power conversion efficiency of 8.4%. These results confirm that multilayer cascade structures are a promising alternative to conventional donor-fullerene organic solar cells.