Cellulose nanocrystals from grape pomace: Production, properties and cytotoxicity assessment.

Cellulose nanocrystals (CNCs) were obtained from grape pomace through chemical and physical pretreatments. Bleached cellulose pulp was subjected to acid hydrolysis (AH) for 30 or 60 min and an ultrasound treatment to obtain CNCs (AH30S and AH60S). Compositional analyses of untreated (UGP) and pretreated (PGP) grape pomace showed the effectiveness of pretreatment in removing non-cellulosic components, recovering 80.1% cellulose in PGP (compared to 19.3% of UGP). Scanning and transmission electron microscopies were used to evaluate the CNCs morphology. AH in combination with ultrasound treatment led to needle-shaped structures and apparently more dispersed suspensions. Crystallinity index and thermal stability were studied by X-ray diffraction and thermogravimetric analysis, respectively. The AH60S sample presented high aspect ratio, crystallinity and thermal stability. CNCs toxicity was evaluated by exposing Caco-2 cells to CNCs suspension and evaluating their viability. Results showed that CNCs are non-toxic, opening the opportunity for their use on food and pharmaceutical applications.

Effect of moderate electric fields in the properties of starch and chitosan films reinforced with microcrystalline cellulose.

Microcrystalline cellulose (MCC) can provide improved properties when the aim is the development of biodegradable packaging materials. In this work the physicochemical properties of polysaccharide-based films (chitosan and starch) with the incorporation of MCC and the application of moderate electric field (MEF) and ultrasonic bath (UB) as treatments, were evaluated. For each treatment, the thickness, moisture content, solubility, water vapor permeability, contact angle, mechanical properties, along with its color and opacity were determined. The surface morphologies of the films were assessed by scanning electron microscopy (SEM). X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy and thermogravimetric analysis (TGA) were also performed. It was observed that the addition of different concentrations of MCC as well as the application of MEF are responsible for changes in the properties of the films, being this effect dependent on the polysaccharide used. Chitosan-based films were slightly yellow, transparent and presented a more homogeneous structure. The use of MEF was efficient in decreasing the permeability to water vapor in chitosan based films without MCC, as well as in production of films with a more hydrophobic surface. The addition of MCC promoted more opaque, rigid, less flexible and less hydrophobic films. Starch-based films were whitish, with a more heterogeneous structure and the application of MEF generated more hydrophilic films with lower tensile strength and Young's modulus. The films with MCC were more opaque, less flexible and less hydrophilic than the films without MCC. The composites presented good thermal properties, which increases their applicability as packaging materials. Therefore, the incorporation of MCC into polysaccharide-based films as well as the application of MEF can be an approach to change the properties of films.