Thiol Coordination Softens Liquid Metal Particles To Improve On-Demand Conductivity.

Achieving tunable rupturing of eutectic gallium indium (EGaIn) particles holds great significance in flexible electronic applications, particularly pressure sensors. We tune the mechanosensitivity of EGaIn particles by preparing them in toluene with thiol surfactants and demonstrate an improvement over typical preparations in ethanol. We observe, across multiple length scales, that thiol surfactants and the nonpolar solvent synergistically reduce the applied stress requirements for electromechanical actuation. At the nanoscale, dodecanethiol and propanethiol in toluene suppress gallium oxide growth, as characterized by transmission electron microscopy and X-ray photoelectron spectroscopy. Quantitative AFM imaging produces force-indentation curves and height images, while conductive AFM measures current while probing individual EGaIn particles. As the applied force increases, thiolated particles demonstrate intensified softening, rupturing, and stress-induced electrical activation at forces 40% lower than those for bare particles in ethanol. To confirm that thiolation facilitates rupturing at the macroscale, a laser is used to ablate samples of EGaIn particles. Scanning electron microscopy and resistance measurements across macroscopic samples confirm that thiolated EGaIn particles coalesce to exhibit electrical activation at 0.1 W. Particles prepared in ethanol, however, require 3 times higher laser power to demonstrate a similar behavior. This unique collection of advanced techniques demonstrates that our particle synthesis conditions can facilitate on-demand functionality to benefit electronic applications.

Poly[2,5-bis(3-dodecylthiophen-2-yl)thieno[3,2-b]thiophene] Oligomer Single-Crystal Nanowires from Supercritical Solution and Their Anisotropic Exciton Dynamics.

Supercritical fluids, exhibiting a combination of liquid-like solvation power and gas-like diffusivity, are a relatively unexplored medium for processing and crystallization of oligomer and polymeric semiconductors whose optoelectronic properties critically depend on the microstructure. Here we report oligomer crystallization from the polymer organic semiconductor, poly[2,5-bis(3-dodecylthiophen-2-yl)thieno[3,2-b]thiophene] (PBTTT) in supercritical hexane, yielding needle-like single crystals up to several microns in length. We characterize the crystals' photophysical properties by time- and polarization-resolved photoluminescence (TPRPL) spectroscopy. These techniques reveal two-dimensional interchromophore coupling facilitated by the high degree of π-stacking order within the crystal. Furthermore, the crystals obtained from supercritical fluid were found to be similar photophysically as the crystallites found in solution-cast thin films and distinct from solution-grown crystals that exhibited spectroscopic signatures indicative of different packing geometries.

Large-Volume Self-Organization of Polymer/Nanoparticle Hybrids with Millimeter-Scale Grain Sizes Using Brush Block Copolymers.

We report that an exceptionally large volume of highly ordered arrays (single grains) on the order of millimeters in scale can be rapidly created through a unique innate guiding mechanism of brush block copolymers (BBCPs). The grain volume is over 10(9) times larger than that of typical self-assembled linear BCPs (LBCPs). The use of strong interactions between nanoparticles (NPs) and BBCPs enables high loadings of functional materials, up to 76 wt % (46 vol %) in the target domain, while maintaining excellent long-range order. Overall, this work provides a simple method to precisely control the spatial orientation of functionalities at nanometer length scales over macroscopic volumes, thereby enabling the production of hybrid materials for many important applications.

Low-Temperature Fabrication of Mesoporous Titanium Dioxide Thin Films with Tunable Refractive Indices for One-Dimensional Photonic Crystals and Sensors on Rigid and Flexible Substrates.

Highly transparent mesoporous titanium dioxide (TiO2; anatase) thin films were prepared at room temperature via ultraviolet (UV) irradiation of hybrid polymer-TiO2 nanoparticle thin films. This approach utilized a UV-curable polymer in conjunction with the photocatalytic activity of TiO2 to form and degrade the organic component of the composite films in one step, producing films with well-controlled porosity and refractive index. By adjustment of the loading of TiO2 nanoparticles in the host polymer, the refractive index was tuned between 1.53 and 1.73. Facile control of these properties and mild processing conditions was leveraged to fabricate robust one-dimensional photonic crystals (Bragg mirrors) consisting entirely of TiO2 on silicon and flexible poly(ethylene terephthalate) substrates. The mesoporous Bragg mirrors were shown to be effective chemical vapor sensors with strong optical responses.

Controlled supramolecular self-assembly of large nanoparticles in amphiphilic brush block copolymers.

To date the self-assembly of ordered metal nanoparticle (NP)/block copolymer hybrid materials has been limited to NPs with core diameters (D(core)) of less than 10 nm, which represents only a very small fraction of NPs with attractive size-dependent physical properties. Here this limitation has been circumvented using amphiphilic brush block copolymers as templates for the self-assembly of ordered, periodic hybrid materials containing large NPs beyond 10 nm. Gold NPs (D(core) = 15.8 ± 1.3 nm) bearing poly(4-vinylphenol) ligands were selectively incorporated within the hydrophilic domains of a phase-separated (polynorbornene-g-polystyrene)-b-(polynorbornene-g-poly(ethylene oxide)) copolymer via hydrogen bonding between the phenol groups on gold and the PEO side chains of the brush block copolymer. Well-ordered NP arrays with an inverse cylindrical morphology were readily generated through an NP-driven order-order transition of the brush block copolymer.

Enhanced mobility and effective control of threshold voltage in P3HT-based field-effect transistors via inclusion of oligothiophenes.

Improved organic field-effect transistor (OFET) performance through a polymer-oligomer semiconductor blend approach is demonstrated. Incorporation of 2,5-bis(3-dodecylthiophen-2-yl)thieno[3,2-b]thiophene (BTTT) into poly(3-hexylthiophene) (P3HT) thin films leads to approximately a 5-fold increase in charge carrier mobility, a 10-fold increase in current on-off ratio, and concomitantly, a decreased threshold voltage to as low as 1.7 V in comparison to single component thin films. The blend approach required no pre- and/or post treatments, and processing was conducted under ambient conditions. The correlation of crystallinity, surface morphology and photophysical properties of the blend thin films was systematically investigated via X-ray diffraction, atomic force microscopy and optical absorption measurements respectively, as a function of blend composition. The dependence of thin-film morphology on the blend composition is illustrated for the P3HT:BTTT system. The blend approach provides an alternative avenue to combine the advantageous properties of conjugated polymers and oligomers for optimized semiconductor performance.

Strain-tunable one dimensional photonic crystals based on zirconium dioxide/slide-ring elastomer nanocomposites for mechanochromic sensing.

We demonstrate the fabrication and performance of tunable, elastic organic/inorganic composite one-dimensional photonic crystals (1DPCs) in the visible spectrum. By controlling the composition of high refractive index metal oxide nanoparticle/polymer composites, a refractive index difference of 0.18 between the filled and unfilled polymer layers can be achieved while maintaining desirable flexibility and elasticity. This index contrast is achieved with a loading of 70 wt % zirconium dioxide nanoparticles within a slide-ring elastomer matrix, which is composed of topologically cross-linked polyrotaxane polyols. The large refractive index contrast enables high reflectivity while simultaneously minimizing the number of layers necessary, compared to purely polymer systems. Because the films are both flexible and elastic, these nanocomposite 1DPCs can function as colorimetric strain sensors. We demonstrate the sensing behavior of these 1DPCs by applying over 40% strain, resulting in a visible color shift across the visible spectrum from red to blue. 1DPCs of just 6 periods maintain reflectance of 40% throughout the visible spectrum, with a tensile mechanochromic sensitivity (Δλ/Δεmax) as high as -6.05 nm/%.

Controlled integration of oligo- and polythiophenes at the molecular scale.

High molecular weight PBTTT-C12 is blended with the pure trimer, BTTT-3, to enhance intergrain connectivity and charge transport. Analysis of the morphology and crystallinity of the blends shows that the polymer and oligomer are well-integrated, leading to high hole mobilities, greater than 0.1 cm(2) V(-1) s(-1), in films that contain as much as 83% oligomer.

Unconventional, chemically stable, and soluble two-dimensional angular polycyclic aromatic hydrocarbons: from molecular design to device applications.

Polycyclic aromatic hydrocarbons (PAHs), consisting of laterally fused benzene rings, are among the most widely studied small-molecule organic semiconductors, with potential applications in organic field-effect transistors (OFETs) and organic photovoltaics (OPVs). Linear acenes, including tetracene, pentacene, and their derivatives, have received particular attention due to the synthetic flexibility in tuning their chemical structure and properties and to their high device performance. Unfortunately, longer acenes, which could exhibit even better performance, are susceptible to oxidation, photodegradation, and, in solar cells which contain fullerenes, Diels-Alder reactions. This Account highlights recent advances in the molecular design of two-dimensional (2-D) PAHs that combine device performance with environmental stability. New synthetic techniques have been developed to create stable PAHs that extend conjugation in two dimensions. The stability of these novel compounds is consistent with Clar's sextet rule as the 2-D PAHs have greater numbers of sextets in their ground-state configuration than their linear analogues. The ionization potentials (IPs) of nonlinear acenes decrease more slowly with annellation in comparison to their linear counterparts. As a result, 2-D bistetracene derivatives that are composed of eight fused benzene rings are measured to be about 200 times more stable in chlorinated organic solvents than pentacene derivatives with only five fused rings. Single crystals of the bistetracene derivatives have hole mobilities, measured in OFET configuration, up to 6.1 cm(2) V(-1) s(-1), with remarkable Ion/Ioff ratios of 10(7). The density functional theory (DFT) calculations can provide insight into the electronic structures at both molecular and material levels and to evaluate the main charge-transport parameters. The 2-D acenes with large aspect ratios and appropriate substituents have the potential to provide favorable interstack electronic interactions, and correspondingly high carrier mobilities. In stark contrast to the 1-D acenes that form mono- and bis-adducts with fullerenes, 2-D PAHs show less reactivity with fullerenes. The geometry of 2-D PAHs plays a crucial role in determining both the barrier and the adduct stability. The reactivity and stability of the 2-D PAHs with regard to Diels-Alder reactions at different reactive sites were explained via DFT calculations of the reaction kinetics and of thermodynamics of reactions and simple Hückel molecular orbital considerations. Also, because of their increased stability in the presence of fullerenes, these compounds have been successfully used in OPVs. The small-molecule semiconductors highlighted in this Account exhibit good charge-transport properties, comparable to those of traditional linear acenes, while being much more environmentally stable. These features have made these 2-D PAHs excellent molecules for fundamental research and device applications.

The good host: formation of discrete one-dimensional fullerene "channels" in well-ordered poly(2,5-bis(3-alkylthiophen-2-yl)thieno[3,2-b]thiophene) oligomers.

Due to the unique crystallinity of poly(2,5-bis(3-alkylthiophen-2-yl)thieno[3,2-b]thiophene) (PBTTT), it is an excellent model polymer to study the structure-property relationship in organic devices, especially those relying on junctions of electron- and hole-transporting materials. Here, we report the synthesis and characterization of a series of monodisperse PBTTT oligothiophenes (n = 1-5) and systematically examine the evolution of crystalline behavior, morphology, and interaction with [6,6]-phenyl C61-butyric acid methyl ester (PCBM) as the molecular conjugation length increases. We discovered that fullerene intercalation occurs when there is enough free volume between the side chains to accommodate the fullerene molecule. The intercalation of PCBM is observed beyond BTTT-2 and longer oligomers, likely similar to that of PBTTT. Interestingly, both experiments and molecular simulations show that PCBM intercalation also appears to "catalyze" a more efficient packing of the BTTT-2 dimers. Crystal structure analysis revealed that the straight BTTT-2 side chains form one-dimensional (1D) channels that could perfectly host PCBM but, in the pure material, accommodate the interdigitated side chains from adjacent layers. In the blend with PCBM, these channels are maintained and enable the cocrystallization and intercalation of PCBM. This is the first time the actual sublattice cell of PCBM has been determined from the X-ray data, and demonstration the utility of the oligomers as model systems for their polymer counterparts. Among the organic photovoltaic devices (OPVs) made from the BTTT oligomers and [6,6]-phenyl C71-butyric acid methyl ester (PC71BM) blends, the ones containing the BTTT-2 dimer exhibit the highest performance.

Oligothiophene semiconductors: synthesis, characterization, and applications for organic devices.

Oligothiophenes provide a highly controlled and adaptable platform to explore various synthetic, morphologic, and electronic relationships in organic semiconductor systems. These short-chain systems serve as models for establishing valuable structure-property relationships to their polymer analogs. In contrast to their polymer counterparts, oligothiophenes afford high-purity and well-defined materials that can be easily modified with a variety of functional groups. Recent work by a number of research groups has revealed functionalized oligothiophenes to be the up-and-coming generation of advanced materials for organic electronic devices. In this review, we discuss the synthesis and characterization of linear oligothiophenes with a focus on applications in organic field effect transistors and organic photovoltaics. We will highlight key structural parameters, such as crystal packing, intermolecular interactions, polymorphism, and energy levels, which in turn define the device performance.

Synthesis, electronic structure, molecular packing/morphology evolution, and carrier mobilities of pure oligo-/poly(alkylthiophenes).

Monodispersed conjugated oligothiophenes are receiving attention in fundamental and applied science due to their interesting optical, optoelectronic, and charge transport properties. These "low molecular weight" polymers serve as model structures for the corresponding polymer analogues, which are inherently polydispersed. Here we report the synthesis, electronic structure, molecular packing/morphology, and charge transport properties of monodispersed oligothiophenes with up to six didodecylquaterthiophene (DDQT) building block repeat units (i.e., 24 thiophene units). At the point where the effective conjugation length is reached, the electronic structure showed convergence behavior to the corresponding polymer, poly(3,3"-didodecyl-quaterthiophene) (PQT-12). X-ray crystal structure analysis of the dimer (DDQT-2) showed that terminal thiophenes exhibit syn-conformations, similar to the terminal syn-conformations observed in the trimer (DDQT-3). The dimer also exhibits a rare bending of the terminal alkyl side chains in order to prevent steric hindrance with neighboring hydrogens attached to core thiophenes. Grazing incidence X-ray scattering measurements revealed a morphology evolution from small molecule-like packing to polymer-like packing in thin films, with a morphology transition occurring near the effective conjugation length. Charge transport measurements showed a mobility increase with decreasing chain length. We correlated the molecular packing and morphology to charge transport and determined that carrier mobilities are most sensitive to crystallinity and crystal grain misorientation. This indicates that molecular weight is not a decisive factor for improved carrier mobility in the low molecular weight region, but rather the degree in crystallinity and in-plane crystal orientation. These results represent a fundamental advancement in understanding the relationship between conjugation length and carrier mobilities in oligothiophene semiconductors.