ABSTRACT
Background: One of the aim of root canal treatment is filling the root canals in a 3D way. It is not always possible to achieve due to the existence of anatomical variations. The obturation of oval canal usually provides great difficulties. Its complex anatomy can cause obstacles in instrumentation, irrigation and obturation. Aim: The main aim of this study is to quantify the area filled by gutta-percha, the area filled by cement and the area of voids present in oval canals, treated by thermoplastic filling techniques in comparison with the lateral condensation technique and observe the adaptation of the gutta-percha to the anatomy of the oval root canals according to the obturation technique. Material and Methods: 80 mandibular incisors were selected. The teeth were instrumented with Protaper Gold® and divided into 4 groups of 20. Group 1 was filled with Thermafill®; group 2 with GuttaCore®; group 3 with continuous wave vertical condensation and group 4 with the lateral condensation technique. Two horizontal sections were cut at 5mm and 7mm from the apex and they were set in putty silicone. The samples were analyzed with a Leica DMS 1000 digital microscope and processed with Leica Suite for Windows XP. The area of gutta-percha, cement and voids and the percentages, of each one, were calculated. A statistical analysis was performed using the T-Student, ANOVA tests and Kruskal-Wallis tests. Results: All thermoplastic techniques achieved a high percentage of obturation. The percentages of voids in group 4 were the highest. Statistically significant differences were found between thermoplastic techniques compared with lateral condensation. Conclusions: Thermoplastic techniques achieve better adaptation of the gutta-percha in the oval canals and low amount of cement and voids in the middle and coronal thirds respect to the lateral condensation group. Moreover, comparing termoplasthicized techniques among them, continuous wave vertical condensation got the lowest percentage of voids. Key words:Warm gutta-percha, thermoplastic obturation, oval canals, oval-shaped canals.
ABSTRACT
BACKGROUND: The embryonic root groove is an anatomical abnormality that starts in the cingulum and extends longitudinally down the long axis root towards the apex. This developmental anomaly is more frequently reported in maxillary lateral incisors. Gu YC in 2011 established three types of radicular grooves depending on its severity. According to this classification, type III presents a greater diagnostic and therapeutic complexity. The prevalence of palatogingival grooves in maxillary lateral incisors ranges from 1.9 to 14%. This case report provides valuable information about the diagnosis and treatment plan of palatogingival grooves with Cone-beam computed tomography (CBCT) scan. CASE REPORT: The patient was referred to the University Dental Clinic of European University of Valencia, with recurrent abscesses at the upper right lateral incisor region for the last two years. Palpation and percussion tests were positive for tooth 1.2. There was no clinical history of caries or previous trauma. Periapical radiography showed periapical radiolucent lesions located, not only in the apical area of tooth 1.2, but also in tooth 1.3. Both teeth had previously been endodontically treated. Periodontal probing showed normal values. CBCT scan was perfomed in order to establish a definitive diagnosis and appropriate treatment plan. DISCUSSION: The complex anatomy of the palatal root groove requires detailed knowledge of the internal root morphology for endodontic treatment success. This complementary tool allows a more accurate image of hard tissue structures, such as palatal grooves and/or accessory roots, in comparison to conventional periapical radiography. The treatment plan of this primary periodontal lesion with secondary endodontic involvement was as follows: periapical surgery combined with root amputation and sealing with MTA, and guided bone regeneration. Key words:Palatal radicular groove, palatogingival groove, maxillary lateral incisor, cone-beam computed tomography, endodontic-periodontal lesion, guided bone regeneration.
ABSTRACT
BACKGROUND: The apexification is the first alternative treatment on a permanent tooth when, after a tooth trauma and in the presence of immature apex trauma, pulp necrosis occurs. Many studies have demonstrated the efficacy of mineral trioxide aggregate (MTA) as apical sealing material of choice in these cases, but has a degree of filtration as all other materials. The objective of this study was to analyze the seal ability of MTA on the duct walls in immature teeth unirradicular apexes, using indirect vibration. MATERIAL AND METHODS: The study was conducted on 45 teeth divided into 3 groups: Group A or control group in which no vibration for placing the MTA was used, Group B and C or groups where indirect vibration analysis was used. All samples were immersed in methylene blue to assess filtration. After performing longitudinal cuts millimetric measuring were made of the degree of filtration, divided into 3 degrees (2mm each grade filtration). RESULTS: Results obtained confirm our hypothesis, obtaining lesser degree of filtration those groups in which indirect vibration (Groups B and C) was performed. It was shown that the degree of filtration is closely linked to the degree of adaptation. CONCLUSIONS: MTA vibration offers better results in its adaptation to the canal walls, significantly reducing the degree of filtration. KEY WORDS: Apexification, MTA, filtration, indirect vibration.
ABSTRACT
BACKGROUND: The aim of the study was to measure the percentage of root canal fillings in long oval canals obturated with thermoplasticized gutta-percha techniques, Beefill 2in1® and Thermafil Obturators®. MATERIAL AND METHODS: Fifty four mandibular incisors were selected after bucco-lingual and mesio-distal radiographs showed at 5 mm from apex an internal long:short diameter ≥2. Teeth were instrumented with Protaper Universal and divided in two groups of 27. Group 1 was obturated with Thermafil Obturators® and group 2 with Beefill 2in1®. Two horizontal sections were cut at 5 and 7 mm from the apex and photographed in a stereo-microscope. The total area of the canal and filled canal in cross-sections were measured with AutoCad and the percentages of gutta-percha-sealer and voids in the canal were obtained. RESULTS: Both systems achieved high percentage of filled canal, Thermafil 96.8% and Beefill 2in1 98.9%. The percentages of voids in both groups were very low. No significant differences were found between the two groups . The percentage obtained at 5 and 7 mm from the apex in both groups showed no significant difference. CONCLUSIONS: The percentages of filled canal (gutta-percha-sealer) were high and these two thermoplasticized techniques are suitable for long oval canals obturation. Key words:Long oval canal, oval canal, thermoplasticized obturation.
