Bone remodeling and responsiveness to mechanical stimuli in individuals with type 1 diabetes mellitus.

Type 1 diabetes mellitus (T1DM) has been linked to increased osteocyte apoptosis, local accumulation of mineralized lacunar spaces, and microdamage suggesting an impairment of the mechanoregulation network in affected individuals. Diabetic neuropathy might exacerbate this dysfunction through direct effects on bone turnover, and indirect effects on balance, muscle strength, and gait. However, the in vivo effects of impaired bone mechanoregulation on bone remodeling in humans remain underexplored. This longitudinal cohort study assessed consenting participants with T1DM and varying degree of distal symmetric sensorimotor polyneuropathy (T1DM, n = 20, median age 46.5 yr, eight female) and controls (CTRL; n = 9, median age 59.0 yr, four female) at baseline and 4-yr follow-up. Nerve conduction in participants with T1DM was tested using DPNCheck and bone remodeling was quantified with longitudinal high-resolution peripheral quantitative-computed tomography (HR-pQCT, 82 µm) at the standard distal sites. Local trabecular bone formation (Tb.F) and resorption (Tb.R) sites were captured by implementing 3D rigid image registration of HR-pQCT images, and the mechanical environment across the bone microarchitecture at these sites was simulated using micro-finite element analysis. We calculated odds ratios to determine the likelihood of bone formation (ORF) and resorption (ORR) with increasing/decreasing strain in percent as markers for mechanoregulation. At the distal radius, Tb.F was 47% lower and Tb.R was 59% lower in T1DM participants compared with CTRL (P < .05). Tb.F correlated positively with nerve conduction amplitude (R = 0.69, P < .05) in participants with T1DM and negatively with glycated hemoglobin (HbA1c) (R = -0.45, P < .05). Additionally, ORF was 34% lower and ORR was 18% lower in T1DM compared with CTRL (P < .05). Our findings represent in vivo evidence suggesting that bone remodeling in individuals with T1DM is in a state of low responsiveness to mechanical stimuli, resulting in impaired bone formation and resorption rates; these correlate to the degree of neuropathy and level of diabetes control.

In a healthy adult, the body's skeleton self-repairs­or remodels­itself to maintain its strength. At the microscopic level, this process is orchestrated by cells, called osteocytes, which can sense and respond to local mechanical forces. Recent studies have suggested that type 1 diabetes mellitus (T1DM), a metabolic bone disease, may negatively impact this mechanically regulated process and reduce bone strength. To investigate this further, we utilized novel methods to monitor local changes in bone microstructure over time using high­resolution peripheral quantitative­computed tomography, allowing us to study the results of cellular behavior on bone remodeling in participants over time. Our study found that bone formation was 47% lower and bone resorption was 59% lower in participants with T1DM compared with controls (CTRL). Bone formation correlated positively with peripheral nerve function and negatively with glycaemic control in participants with T1DM. Furthermore, the links between mechanical forces acting on bone remodeling were 34% weaker for formation and 18% weaker for resorption compared with CTRL. Our findings show that bone remodeling in people with T1DM is in a state of low responsiveness to mechanical stimuli, resulting in impaired bone formation and resorption rates, and ultimately, impaired self-repair.

A multi-stack registration technique to improve measurement accuracy and precision across longitudinal HR-pQCT scans.

BACKGROUND: Recent applications of high-resolution peripheral quantitative computed tomography (HR-pQCT) have demonstrated that changes in local bone remodelling can be quantified in vivo using longitudinal three-dimensional image registration. However, certain emerging applications, such as fracture healing and joint analysis, require larger multi-stack scan regions that can result in stack shift image artifacts. These artifacts can be detrimental to the accurate alignment of the bone structure across multiple timepoints. The purpose of this study was to establish a multi-stack registration protocol for evaluating longitudinal HR-pQCT images and to assess the accuracy and precision error in comparison with measures obtained using previously established three-dimensional longitudinal registration. METHODS: Three same day multi-stack HR-pQCT scans of the radius (2 stacks in length) and tibia (3 stacks in length) were obtained from 39 healthy individuals who participated in a previous reproducibility study. A fully automated multi-stack registration algorithm was developed to re-align stacks within a scan by leveraging slight offsets between longitudinal scans. Stack shift severity before and after registration was quantified using a newly proposed stack-shift severity score. The false discovery rate for bone remodelling events and precision error of bone morphology and micro-finite element analysis parameters were compared between longitudinally registered scans with and without the addition of multi-stack registration. RESULTS: Most scans (82 %) improved in stack alignment or maintained the lowest stack shift severity score when multi-stack registration was implemented. The false discovery rate of bone remodelling events significantly decreased after multi-stack registration, resulting in median false detection of bone formation and resorption fractions between 3.2 to 7.5 % at the radius and 3.4 to 5.3 % at the tibia. Further, precision error was significantly reduced or remained unchanged in all standard bone morphology and micro-finite element analysis parameters, except for total and trabecular cross-sectional areas. CONCLUSION: Multi-stack registration is an effective strategy for accurately aligning multi-stack HR-pQCT scans without modification of the image acquisition protocol. The algorithm presented here is a viable approach for performing accurate morphological analysis on multi-stack HR-pQCT scans, particularly for advanced application investigating local bone remodelling in vivo.

Precision of bone mechanoregulation assessment in humans using longitudinal high-resolution peripheral quantitative computed tomography in vivo.

Local mechanical stimuli in the bone microenvironment are essential for the homeostasis and adaptation of the skeleton, with evidence suggesting that disruption of the mechanically-driven bone remodelling process may lead to bone loss. Longitudinal clinical studies have shown the combined use of high-resolution peripheral quantitative computed tomography (HR-pQCT) and micro-finite element analysis can be used to measure load-driven bone remodelling in vivo; however, quantitative markers of bone mechanoregulation and the precision of these analyses methods have not been validated in human subjects. Therefore, this study utilised participants from two cohorts. A same-day cohort (n = 33) was used to develop a filtering strategy to minimise false detections of bone remodelling sites caused by noise and motion artefacts present in HR-pQCT scans. A longitudinal cohort (n = 19) was used to develop bone imaging markers of trabecular bone mechanoregulation and characterise the precision for detecting longitudinal changes in subjects. Specifically, we described local load-driven formation and resorption sites independently using patient-specific odds ratios (OR) and 99 % confidence intervals. Conditional probability curves were computed to link the mechanical environment to the remodelling events detected on the bone surface. To quantify overall mechanoregulation, we calculated a correct classification rate measuring the fraction of remodelling events correctly identified by the mechanical signal. Precision was calculated as root-mean-squared averages of the coefficient of variation (RMS-SD) of repeated measurements using scan-rescan pairs at baseline combined with a one-year follow-up scan. We found no significant mean difference (p < 0.01) between scan-rescan conditional probabilities. RMS-SD was 10.5 % for resorption odds, 6.3 % for formation odds, and 1.3 % for correct classification rates. Bone was most likely to be formed in high-strain and resorbed in low-strain regions for all participants, indicating a consistent, regulated response to mechanical stimuli. For each percent increase in strain, the likelihood of bone resorption decreased by 2.0 ± 0.2 %, and the likelihood of bone formation increased by 1.9 ± 0.2 %, totalling 38.3 ± 1.1 % of strain-driven remodelling events across the entire trabecular compartment. This work provides novel robust bone mechanoregulation markers and their precision for designing future clinical studies.

Mechanical Biomarkers in Bone Using Image-Based Finite Element Analysis.

PURPOSE OF REVIEW: The purpose of this review is to summarize insights gained by finite element (FE) model-based mechanical biomarkers of bone for in vivo assessment of bone development and adaptation, fracture risk, and fracture healing. RECENT FINDINGS: Muscle-driven FE models have been used to establish correlations between prenatal strains and morphological development. Postnatal ontogenetic studies have identified potential origins of bone fracture risk and quantified the mechanical environment during stereotypical locomotion and in response to increased loading. FE-based virtual mechanical tests have been used to assess fracture healing with higher fidelity than the current clinical standard; here, virtual torsion test data was a better predictor of torsional rigidity than morphometric measures or radiographic scores. Virtual mechanical biomarkers of strength have also been used to deepen the insights from both preclinical and clinical studies with predictions of strength of union at different stages of healing and reliable predictions of time to healing. Image-based FE models allow for noninvasive measurement of mechanical biomarkers in bone and have emerged as powerful tools for translational research on bone. More work to develop nonirradiating imaging techniques and validate models of bone during particularly dynamic phases (e.g., during growth and the callus region during fracture healing) will allow for continued progress in our understanding of how bone responds along the lifespan.

A Bioinspired Orthopedic Biomaterial with Tunable Mechanical Properties Based on Sintered Titanium Fibers.

Inadequate mechanical compliance of orthopedic implants can result in excessive strain of the bone interface, and ultimately, aseptic loosening. It is hypothesized that a fiber-based biometal with adjustable anisotropic mechanical properties can reduce interface strain, facilitate continuous remodeling, and improve implant survival under complex loads. The biometal is based on strategically layered sintered titanium fibers. Six different topologies are manufactured. Specimens are tested under compression in three orthogonal axes under 3-point bending and torsion until failure. Biocompatibility testing involves murine osteoblasts. Osseointegration is investigated by micro-computed tomography and histomorphometry after implantation in a metaphyseal trepanation model in sheep. The material demonstrates compressive yield strengths of up to 50 MPa and anisotropy correlating closely with fiber layout. Samples with 75% porosity are both stronger and stiffer than those with 85% porosity. The highest bending modulus is found in samples with parallel fiber orientation, while the highest shear modulus is found in cross-ply layouts. Cell metabolism and morphology indicate uncompromised biocompatibility. Implants demonstrate robust circumferential osseointegration in vivo after 8 weeks. The biometal introduced in this study demonstrates anisotropic mechanical properties similar to bone, and excellent osteoconductivity and feasibility as an orthopedic implant material.

Motion grading of high-resolution quantitative computed tomography supported by deep convolutional neural networks.

Image quality degradation due to subject motion confounds the precision and reproducibility of measurements of bone density, morphology and mechanical properties from high-resolution peripheral quantitative computed tomography (HR-pQCT). Time-consuming operator-based scoring of motion artefacts remains the gold standard to determine the degree of acceptable motion. However, due to the subjectiveness of manual grading, HR-pQCT scans of poor quality, which cannot be used for analysis, may be accepted upon initial review, leaving patients with incomplete or inaccurate imaging results. Convolutional Neural Networks (CNNs) enable fast image analysis with relatively few pre-processing requirements in an operator-independent and fully automated way for image classification tasks. This study aimed to develop a CNN that can predict motion scores from HR-pQCT images, while also being aware of uncertain predictions that require manual confirmation. The CNN calculated motion scores within seconds and achieved a high F1-score (86.8 ± 2.8 %), with good precision (87.5 ± 2.7 %), recall (86.7 ± 2.9 %) and a substantial agreement with the ground truth measured by Cohen's kappa (κ = 68.6 ± 6.2 %); motion scores of the test dataset were predicted by the algorithm with comparable accuracy, precision, sensitivity and agreement as by the operators (p > 0.05). This post-processing approach may be used to assess the effect of motion scores on microstructural analysis and can be immediately implemented into clinical protocols, significantly reducing the time for quality assessment and control of HR-pQCT scans.

Meta-analysis of Diabetes Mellitus-Associated Differences in Bone Structure Assessed by High-Resolution Peripheral Quantitative Computed Tomography.

PURPOSE OF REVIEW: Diabetes mellitus is defined by elevated blood glucose levels caused by changes in glucose metabolism and, according to its pathogenesis, is classified into type 1 (T1DM) and type 2 (T2DM) diabetes mellitus. Diabetes mellitus is associated with multiple degenerative processes, including structural alterations of the bone and increased fracture risk. High-resolution peripheral computed tomography (HR-pQCT) is a clinically applicable, volumetric imaging technique that unveils bone microarchitecture in vivo. Numerous studies have used HR-pQCT to assess volumetric bone mineral density and microarchitecture in patients with diabetes, including characteristics of trabecular (e.g. number, thickness and separation) and cortical bone (e.g. thickness and porosity). However, study results are heterogeneous given different imaging regions and diverse patient cohorts. RECENT FINDINGS: This meta-analysis assessed T1DM- and T2DM-associated characteristics of bone microarchitecture measured in human populations in vivo reported in PubMed- and Embase-listed publications from inception (2005) to November 2021. The final dataset contained twelve studies with 516 participants with T2DM and 3067 controls and four studies with 227 participants with T1DM and 405 controls. While T1DM was associated with adverse trabecular characteristics, T2DM was primarily associated with adverse cortical characteristics. These adverse effects were more severe at the radius than the load-bearing tibia, indicating increased mechanical loading may compensate for deleterious bone microarchitecture changes and supporting mechanoregulation of bone fragility in diabetes mellitus. Our meta-analysis revealed distinct predilection sites of bone structure aberrations in T1DM and T2DM, which provide a foundation for the development of animal models of skeletal fragility in diabetes and may explain the uncertainty of predicting bone fragility in diabetic patients using current clinical algorithms.

Clinical observation of diminished bone quality and quantity through longitudinal HR-pQCT-derived remodeling and mechanoregulation.

High resolution peripheral quantitative computed tomography (HR-pQCT) provides methods for quantifying volumetric bone mineral density and microarchitecture necessary for early diagnosis of bone disease. When combined with a longitudinal imaging protocol and finite element analysis, HR-pQCT can be used to assess bone formation and resorption (i.e., remodeling) and the relationship between this remodeling and mechanical loading (i.e., mechanoregulation) at the tissue level. Herein, 25 patients with a contralateral distal radius fracture were imaged with HR-pQCT at baseline and 9-12 months follow-up: 16 patients were prescribed vitamin D3 with/without calcium supplement based on a blood biomarker measures of bone metabolism and dual-energy X-ray absorptiometry image-based measures of normative bone quantity which indicated diminishing (n = 9) or poor (n = 7) bone quantity and 9 were not. To evaluate the sensitivity of this imaging protocol to microstructural changes, HR-pQCT images were registered for quantification of bone remodeling and image-based micro-finite element analysis was then used to predict local bone strains and derive rules for mechanoregulation. Remodeling volume fractions were predicted by both average values of trabecular and cortical thickness and bone mineral density (R2 > 0.8), whereas mechanoregulation was affected by dominance of the arm and group classification (p < 0.05). Overall, longitudinal, extended HR-pQCT analysis enabled the identification of changes in bone quantity and quality too subtle for traditional measures.

Clinical Data for Parametrization of In Silico Bone Models Incorporating Cell-Cytokine Dynamics: A Systematic Review of Literature.

In silico simulations aim to provide fast, inexpensive, and ethical alternatives to years of costly experimentation on animals and humans for studying bone remodeling, its deregulation during osteoporosis and the effect of therapeutics. Within the varied spectrum of in silico modeling techniques, bone cell population dynamics and agent-based multiphysics simulations have recently emerged as useful tools to simulate the effect of specific signaling pathways. In these models, parameters for cell and cytokine behavior are set based on experimental values found in literature; however, their use is currently limited by the lack of clinical in vivo data on cell numbers and their behavior as well as cytokine concentrations, diffusion, decay and reaction rates. Further, the settings used for these parameters vary across research groups, prohibiting effective cross-comparisons. This review summarizes and evaluates the clinical trial literature that can serve as input or validation for in silico models of bone remodeling incorporating cells and cytokine dynamics in post-menopausal women in treatment, and control scenarios. The GRADE system was used to determine the level of confidence in the reported data, and areas lacking in reported measures such as binding site occupancy, reaction rates and cell proliferation, differentiation and apoptosis rates were highlighted as targets for further research. We propose a consensus for the range of values that can be used for the cell and cytokine settings related to the RANKL-RANK-OPG, TGF-ß and sclerostin pathways and a Levels of Evidence-based method to estimate parameters missing from clinical trial literature.

Do high childcare costs and low access to Head Start and childcare subsidies limit mothers' employment? A state-level analysis.

Access to affordable childcare is crucial to mothers' employment. Yet, childcare costs and access to Head Start, childcare subsidies, and state-funded preschool vary dramatically across U.S. states. Using data from the 2016 American Community Survey five-year estimates, we apply hierarchical logistic regression models to show mothers are more likely to work in states with inexpensive childcare, higher Head Start enrollment and childcare subsidy participation, and increased availability of state-funded preschool. Childcare subsidy access is associated with higher maternal employment amongst those with lower levels of educational attainment, whereas state-funded preschool is associated with higher employment primarily among the college educated. Additionally, our analysis revealed that Head Start has a stronger association with maternal employment in states where childcare costs are high, reducing the negative relationship of employment with expensive childcare. As national discussions continue to center on the importance of childcare, our research adds evidence that public programs support maternal employment through reducing out-of-pocket childcare costs.

Research Note: School Reopenings During the COVID-19 Pandemic and Implications for Gender and Racial Equity.

In the fall of 2020, school districts across the country reopened under a variety of instructional modes. Some districts returned to in-person instruction and some operated remotely. Others reopened under hybrid models, wherein students alternated times, days, or weeks of in-person instruction. To capture this variation, we developed the Elementary School Operating Status (ESOS) database. ESOS provides data on elementary school districts' primary operating status in the first grading period of the 2020-2021 school year, covering 24 million students in more than 9,000 school districts in all states. In this research note, we introduce these data and offer two analytical examples. We show that school districts with greater representation of Black and Hispanic students were less likely to offer in-person instruction than were districts with greater representation of White students. These racial disparities remained after accounting for geographic locale and COVID-19 prevalence. We also show that the number of in-person elementary school instruction days was associated with mothers' labor force participation relative to fathers and to women without children-that is, the fewer days of instruction, the less likely that mothers were employed. ESOS is a critical data source for evaluating the mid- and long-term implications for students who experienced reduced in-person learning and for mothers who exited employment in the absence of in-person instruction and care.

Bone Mechanoregulation Allows Subject-Specific Load Estimation Based on Time-Lapsed Micro-CT and HR-pQCT in Vivo.

Patients at high risk of fracture due to metabolic diseases frequently undergo long-term antiresorptive therapy. However, in some patients, treatment is unsuccessful in preventing fractures or causes severe adverse health outcomes. Understanding load-driven bone remodelling, i.e., mechanoregulation, is critical to understand which patients are at risk for progressive bone degeneration and may enable better patient selection or adaptive therapeutic intervention strategies. Bone microarchitecture assessment using high-resolution peripheral quantitative computed tomography (HR-pQCT) combined with computed mechanical loads has successfully been used to investigate bone mechanoregulation at the trabecular level. To obtain the required mechanical loads that induce local variances in mechanical strain and cause bone remodelling, estimation of physiological loading is essential. Current models homogenise strain patterns throughout the bone to estimate load distribution in vivo, assuming that the bone structure is in biomechanical homoeostasis. Yet, this assumption may be flawed for investigating alterations in bone mechanoregulation. By further utilising available spatiotemporal information of time-lapsed bone imaging studies, we developed a mechanoregulation-based load estimation (MR) algorithm. MR calculates organ-scale loads by scaling and superimposing a set of predefined independent unit loads to optimise measured bone formation in high-, quiescence in medium-, and resorption in low-strain regions. We benchmarked our algorithm against a previously published load history (LH) algorithm using synthetic data, micro-CT images of murine vertebrae under defined experimental in vivo loadings, and HR-pQCT images from seven patients. Our algorithm consistently outperformed LH in all three datasets. In silico-generated time evolutions of distal radius geometries (n = 5) indicated significantly higher sensitivity, specificity, and accuracy for MR than LH (p < 0.01). This increased performance led to substantially better discrimination between physiological and extra-physiological loading in mice (n = 8). Moreover, a significantly (p < 0.01) higher association between remodelling events and computed local mechanical signals was found using MR [correct classification rate (CCR) = 0.42] than LH (CCR = 0.38) to estimate human distal radius loading. Future applications of MR may enable clinicians to link subtle changes in bone strength to changes in day-to-day loading, identifying weak spots in the bone microstructure for local intervention and personalised treatment approaches.

Formation Dominates Resorption With Increasing Mineralized Density and Time Postfracture in Cortical but Not Trabecular Bone: A Longitudinal HRpQCT Imaging Study in the Distal Radius.

Clinical evaluation of fracture healing is often limited to an assessment of fracture bridging from radiographic images, without consideration for other aspects of bone quality. However, recent advances in HRpQCT offer methods to accurately monitor microstructural bone remodeling throughout the healing process. In this study, local bone formation and resorption were investigated during the first year post fracture in both the fractured (n = 22) and contralateral (n = 19) radii of 34 conservatively treated patients (24 female, 10 male) who presented with a unilateral radius fracture at the Innsbruck University Hospital, Austria. HRpQCT images and clinical metrics were acquired at six time points for each patient. The standard HRpQCT image acquisition was captured for all radii, with additional distal and proximal image acquisitions for the fractured radii. Measured radial bone densities were isolated with a voxel-based mask and images were rigidly registered to images from the previous imaging session using a pyramid-based approach. From the registered images, bone formation and resorption volume fractions were quantified for multiple density-based thresholds and compared between the fractured and contralateral radius and relative to demographics, bone morphometrics, and fracture metrics using regression. Compared with the contralateral radius, both bone formation and resorption were significantly increased in the fractured radius throughout the study for nearly all evaluated thresholds. Higher density cortical bone formation continually increased throughout the duration of the study and was significantly greater than resorption during late-stage healing in both the fractured and intact regions of the radius. With the small and diverse study population, only weak relationships between fracture remodeling and patient-specific parameters were unveiled. However this study provides methods for the analysis of local bone remodeling during fracture healing and highlights relevant considerations for future studies, specifically that remodeling postfracture is likely to continue beyond 12-months postfracture. © 2021 The Authors. JBMR Plus published by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research.

Automated segmentation of fractured distal radii by 3D geodesic active contouring of in vivo HR-pQCT images.

Radius fractures are among the most common fracture types; however, there is limited consensus on the standard of care. A better understanding of the fracture healing process could help to shape future treatment protocols and thus improve functional outcomes of patients. High-resolution peripheral quantitative computed tomography (HR-pQCT) allows monitoring and evaluation of the radius on the micro-structural level, which is crucial to our understanding of fracture healing. However, current radius fracture studies using HR-pQCT are limited by the lack of automated contouring routines, hence only including small number of patients due to the prohibitively time-consuming task of manually contouring HR-pQCT images. In the present study, a new method to automatically contour images of distal radius fractures based on 3D morphological geodesic active contours (3D-GAC) is presented. Contours of 60 HR-pQCT images of fractured and conservatively treated radii spanning the healing process up to one year post-fracture are compared to the current gold standard, hand-drawn 2D contours, to assess the accuracy of the algorithm. Furthermore, robustness was established by applying the algorithm to HR-pQCT images of intact radii of 73 patients and comparing the resulting morphometric indices to the gold standard patient evaluation including a threshold- and dilation-based contouring approach. Reproducibility was evaluated using repeat scans of intact radii of 19 patients. The new 3D-GAC approach offers contours within inter-operator variability for images of fractured distal radii (mean Dice score of 0.992 ± 0.005 versus median operator Dice score of 0.992 ± 0.006). The generated contours for images of intact radii yielded morphometric indices within the in vivo reproducibility limits compared to the current gold standard. Additionally, the 3D-GAC approach shows an improved robustness against failure (n = 5) when dealing with cortical interruptions, fracture fragments, etc. compared with the automatic, default manufacturer pipeline (n = 40). Using the 3D-GAC approach assures consistent results, while reducing the need for time-consuming hand-contouring.

Applying improvement science to establish a resident sustained quality improvement (QI) educational model.

BACKGROUND: Prior to 2017, internal medicine (IM) residents at the University of Alberta did not have a standardised quality improvement (QI) educational curriculum. Our goal was to use QI principles to develop a resident sustained curriculum using the Evidence-based Practice for Improving Quality (EPIQ) training course. METHODS: Three one-year Plan-Do-Study-Act (PDSA) cycles were conducted. The EPIQ course was delivered to postgraduate year (PGY) 1-3 residents (n=110, PDSA 1) in 2017, PGY-1 residents (n=27, PDSA 2) in 2018 and PGY-1 residents (n=28, PDSA 3) in 2019. Trained residents were recruited as facilitators for PDSA 2 and 3. Residents worked through potential QI projects that were later presented for evaluation. Precourse and postcourse surveys and tests were conducted to assess knowledge acquisition and curriculum satisfaction. Process, outcome and balancing measures were also evaluated. RESULTS: In PDSA 1, 98% felt they had acquired understanding of QI principles (56% increase), 94% of PGY-2 and PGY-3 residents preferred this QI curriculum compared with previous training, and 65% of residents expressed interest in pursuing a QI project (15% increase). In PDSA 2, tests scores of QI principles improved from 77.6% to 80%, and 40% of residents expressed interest in becoming a course facilitator. In PDSA 3, self-rated confidence with QI methodology improved from 53% to 75%. A total of 165 residents completed EPIQ training and 11 residents became course facilitators. CONCLUSIONS: Having a structured QI curriculum and working through practical QI projects provided valuable QI training for residents. Feedback was positive, and with each PDSA cycle there was increased resident interest in QI. Developing this curriculum using validated QI tools highlighted areas of change opportunity thereby enhancing acceptance. As more cycles of EPIQ are delivered and more residents become facilitators, it is our aim to have this curriculum sustained by future residents.

Evaluation of experimental, analytical, and computational methods to determine long-bone bending stiffness.

Methods used to evaluate bone mechanical properties vary widely depending on the motivation and environment of individual researchers, clinicians, and industries. Further, the innate complexity of bone makes validation of each method difficult. Thus, the purpose of the present research was to quantify methodological error of the most common methods used to predict long-bone bending stiffness, more specifically, flexural rigidity (EI). Functional testing of a bi-material porcine bone surrogate, developed in a previous study, was conducted under four-point bending test conditions. The bone surrogate was imaged using computed tomography (CT) with an isotropic voxel resolution of 0.625 mm. Digital image correlation (DIC) of the bone surrogate was used to quantify the methodological error between experimental, analytical, and computational methods used to calculate EI. These methods include the application of Euler Bernoulli beam theory to mechanical testing and DIC data; the product of the bone surrogate composite bending modulus and second area moment of inertia; and finite element analysis (FEA) using computer-aided design (CAD) and CT-based geometric models. The methodological errors of each method were then compared. The results of this study determined that CAD-based FEA was the most accurate determinant of bone EI, with less than five percent difference in EI to that of the DIC and consistent reproducibility of the measured displacements for each load increment. CT-based FEA was most accurate for axial strains. Analytical calculations overestimated EI and mechanical testing was the least accurate, grossly underestimating flexural rigidity of long-bones.

COVID-19 and the gender gap in work hours.

School and day care closures due to the COVID-19 pandemic have increased caregiving responsibilities for working parents. As a result, many have changed their work hours to meet these growing demands. In this study, we use panel data from the US Current Population Survey to examine changes in mothers' and fathers' work hours from February through April 2020, the period of time prior to the widespread COVID-19 outbreak in the United States and through its first peak. Using person-level fixed effects models, we find that mothers with young children have reduced their work hours four to five times more than fathers. Consequently, the gender gap in work hours has grown by 20-50 per cent. These findings indicate yet another negative consequence of the COVID-19 pandemic, highlighting the challenges it poses to women's work hours and employment.

The Gendered Politics of Pandemic Relief: Labor and Family Policies in Denmark, Germany, and the United States During COVID-19.

The COVID-19 pandemic has magnified families' struggles to reconcile caregiving and employment, especially for working mothers. How have different countries reacted to these troubling circumstances? What policies have been implemented to alleviate the pernicious effects of the pandemic on gender and labor inequalities? We examine the policies offered in Denmark, Germany, and the United States, three countries that represent distinct welfare regimes. We find important differences among the policy solutions provided, but also in the "cultural infrastructures" that allow policies to work as intended, or not. In Denmark, a social-democratic welfare state, robust federal salary guarantee programs supplemented an already strong social safety net. The country was among the first to lock down and reorganize health care-and also among the first to reopen schools and child care facilities, acknowledging that parents' employment depends on child care provisioning, especially for mothers. Germany, a corporatist regime, substantially expanded existing programs and provided generous subsidies. However, despite an ongoing official commitment to reduce gender inequality, the cultural legacy of a father breadwinner/mother caregiver family model meant that reopening child care facilities was not a first priority, which pushed many mothers out of paid work. In the U.S. liberal regime, private organizations-particularly in privileged economic sectors-are the ones primarily offering supports to working parents. Patchwork efforts at lockdown and reopening have meant a lengthy period of limbo for working families, with disastrous consequences for women, especially the most vulnerable. Among such varied "solutions" to the consequences of the pandemic, those of liberal regimes seem to be worsening inequalities. The unprecedented nature of the current pandemic recession suggests a need for scholars to gender the study of economic crises.