The validity of commonly used adipose tissue body composition equations relative to dual energy X-ray absorptiometry (DXA) in gaelic games players.

Dual-energy X-ray absorptiometry (DXA) and adipose tissue percentage estimates (AT%) derived from regression based skinfold equations were compared. 35 Gaelic games players [20.9 ± 1.7 years; 78.1 ± 8.6 kg; 179.5 ± 5.7 cm] underwent whole body fan beam DXA scans following a standardised protocol and assessment of skinfold thickness at 8 sites. Adipose tissue% from the sum of skinfolds and/or via body density were calculated for general and athlete specific equations (SKf-AT %). The relationship, i. e., proportional bias, fixed bias and random error (SEE) between DXA-AT % and AT % derived from the 6 skinfold equations were determined using least squares regression analysis. Skinfold AT% estimates were underestimated relative to DXA-AT % across all skinfold equations except that of Durnin and Wormersley [9] (D&W-∑(4AT %)) (16.7 ± 3.4 vs. 16.6 ± 4.0 %). All equations demonstrated 95 % prediction intervals ranges exceeding ~10 %. Each equation failed to predict AT% relative to DXA within an accepted ± 3.5 % anthropometric error rate. It is recommended that the conversion of absolute skinfold thickness to an AT % is avoided and that the skinfold equations assessed herein are not utilised in Gaelic games players. Alternate 'sum of skinfold' approaches should be considered.

Charge density-dependent strength of hydration and biological structure.

Small ions of high charge density (kosmotropes) bind water molecules strongly, whereas large monovalent ions of low charge density (chaotropes) bind water molecules weakly relative to the strength of water-water interactions in bulk solution. The standard heat of solution of a crystalline alkali halide is shown here to be negative (exothermic) only when one ion is a kosmotrope and the ion of opposite charge is a chaotrope; this standard heat of solution is known to become proportionally more positive as the difference between the absolute heats of hydration of the corresponding gaseous anion and cation decreases. This suggests that inner sphere ion pairs are preferentially formed between oppositely charged ions with matching absolute enthalpies of hydration, and that biological organization arises from the noncovalent association of moieties with matching absolute free energies of solution, except where free energy is expended to keep them apart. The major intracellular anions (phosphates and carboxylates) are kosmotropes, whereas the major intracellular monovalent cations (K+; arg, his, and lys side chains) are chaotropes; together they form highly soluble, solvent-separated ion pairs that keep the contents of the cell in solution.

Sticky ions in biological systems.

Aqueous gel sieving chromatography on Sephadex G-10 of the Group IA cations (Li+, Na+, K+, Rb+, Cs+) plus NH4+ as the Cl- salts, in combination with previous results for the halide anions (F-, Cl-, Br-, I-) as the Na+ salts [Washabaugh, M.W. & Collins, K.D. (1986) J. Biol. Chem. 261, 12477-12485], leads to the following conclusions. (i) The small monovalent ions (Li+, Na+, F-) flow through the gel with water molecules attached, whereas the large monovalent ions (K+, Rb+, Cs+, Cl-, Br-, I-) adsorb to the nonpolar surface of the gel, a process requiring partial dehydration of the ion and implying that these ions bind the immediately adjacent water molecules weakly. (ii) The transition from strong to weak hydration occurs at a radius of about 1.78 A for the monovalent anions, compared with a radius of about 1.06 A for the monovalent cations (using ionic radii), indicating that the anions are more strongly hydrated than the cations for a given charge density. (iii) The anions show larger deviations from ideal behavior (an elution position corresponding to the anhydrous molecular weight) than do the cations and dominate the chromatographic behavior of the neutral salts. These results are interpreted to mean that weakly hydrated ions (chaotropes) are "pushed" onto weakly hydrated surfaces by strong water-water interactions and that the transition from strong ionic hydration to weak ionic hydration occurs where the strength of ion-water interactions approximately equals the strength of water-water interactions in bulk solution.

Interdependence of ryanodine binding, oligomeric receptor interactions, and Ca2+ release regulation in junctional sarcoplasmic reticulum.

We have examined ryanodine binding to its receptor (RR) and compared its effect on Ca2+ release to the Ca2+ release triggered by Ca2+ plus ATP, using vesicular fragments of junctional terminal cisternae (JTC) obtained from skeletal muscle. Ryanodine binding is slow (taking hours or days to complete) and is highly temperature (Q10 = 4) and Ca2+ dependent. At equilibrium, the extent of binding increases as the concentration of ryanodine is raised above 10(-9) M, exhibiting negative cooperativity and reaching the stoichiometry of the 560,000-Da RR chains near 10(-5) M ryanodine. The specificity of the high affinity binding is demonstrated by competitive binding of ryanodine analogs. Kinetic studies using rapid filtration show that, in the absence of ryanodine, rapid (k = 15 s-1) release of Ca2+ follows a triggering exposure of loaded JTC vesicles to perfusion media containing Ca2+ plus ATP. Induction of this release has no lag period and displays minimal temperature dependence. In contrast, prolonged exposure of JTC vesicles to low (10(-7) M) ryanodine concentrations changes the JTC to a state permitting slow (k = 1 s-1) release of Ca2+ even in the absence of the Ca2+ plus ATP trigger. Higher (greater than microM) concentrations of ryanodine do not allow any Ca2+ release and prevent even the release normally triggered by Ca2+ plus ATP. Our data suggest that ryanodine binds to the open state of the tetrameric RR, inducing protein conformational changes and altered oligomeric interactions. Binding of the first molecule of ryanodine to one of the four binding sites on the receptor produces a partially closed and low conductance state of the Ca2+ release channel and reduces the ryanodine binding affinity of the remaining sites. Ryanodine occupancy of all four binding sites on the receptor completes closure of the Ca2+ channel and blocks the triggering action of Ca2+ plus ATP. The tetrameric association of the RR chains is demonstrated by crosslinking with bifunctional reagents, generating crosslinked tetramers that retain ryanodine binding and Ca2+ release functions.

Dihydroorotase from Escherichia coli. Substitution of Co(II) for the active site Zn(II).

Treatment of Escherichia coli dihydroorotase (a homodimer of subunit molecular weight 38,729) containing only the 1 active site Zn(II) ion per subunit with the sulfhydryl reagent N-(ethyl)-maleimide (NEM) blocks the two external Zn(II) sites per subunit and dramatically lessens the precipitation caused by high concentrations of Zn(II); stabilizes the enzyme partially against air oxidation and dilution inactivation; makes the active site Zn(II) easier to remove; and lowers Km and increases kcat. Treatment of NEM-blocked dihydroorotase ((NEM)dihydroorotase) with the chelator 2,6-pyridinedicarboxylic acid at pH 5.0 in the absence of oxygen and trace metal ions removes the active site Zn(II) with a half-life of 15 min, allowing the production of milligram amounts of moderately stable apo-(NEM)dihydroorotase in about 80% yield. Treatment of apo-(NEM)dihydroorotase with Co(II) at pH 7.0 produces (NEM)dihydroorotase completely substituted at the active site with Co(II) in 100% yield: analysis gives 0.95-1.1 g atoms of Co(II) per active site and 0.03-0.05 g atoms of Zn(II) per active site. This Co(II)-(NEM)dihydroorotase is hyperactive at pH 8. The electronic absorption spectrum of Co(II)-(NEM)dihydroorotase at pH 6.5 implicates an active site thiol group as a ligand to the metal ion. The spectrum is inconsistent with tetrahedral coordination of the active site metal ion and is most consistent with a pentacoordinate structure.

The systematic characterization by aqueous column chromatography of solutes which affect protein stability.

We have systematically characterized, by aqueous column chromatography on a size exclusion cross-linked dextran gel (Sephadex G-10), 12 solutes, 11 of which are known to affect protein stability. Six are chaotropes (water structure breakers) and destabilize proteins, while five are polar kosmotropes (polar water structure makers) and stabilize proteins. Analysis of the chromatographic behavior of these neutral (ethylene glycol, urea), positively charged (Tris, guanidine, as the hydrochloride salts) and negatively charged (SO2-4, HPO2-4, F-, Cl-, Br-, Cl3CCO-2, I-, SCN-, as the sodium salts, in order of elution) solutes at pH 7 as a function of sample concentration (up to 0.6 M), supporting electrolyte, and temperature yields four conclusions, based largely on the behavior of the anions. Chaotropes adsorb to the gel according to their position in the Hofmeister series, with the most chaotropic species adsorbing most strongly. ++Chaotropes adsorb to the gel less strongly in the presence of chaotropes (a salting in effect) and more strongly in the presence of polar kosmotropes (a salting out effect). Polar kosmotropes do not adsorb to the gel, and are sieved through the gel according to their position in the Hofmeister series, with the most kosmotropic species having the largest relative hydrodynamic radii. The hydrodynamic radii of polar kosmotropes is increased by chaotropes and decreased by polar kosmotropes. These results suggest that a chaotrope interacts with the first layer of immediately adjacent water molecules somewhat less strongly than would bulk water in its place; a polar kosmotrope, more strongly.

Dihydroorotase from Escherichia coli. Cloning the pyrC gene and production of tryptic peptide maps.

We have inserted a 1.7-kilobase pair Escherichia coli DNA fragment containing the 1-kilobase pair pyrC gene into the high copy number plasmid pKC16. Dihydroorotase expressed by the pyrC plasmid in E. coli constituted 6.3% of the soluble protein in frozen cell paste. Pure dihydroorotase derived from this frozen cell paste was compared with pure enzyme derived from an E. coli strain lacking the pyrC plasmid: tryptic peptide maps from the two dihydroorotase preparations, produced using reverse-phase high performance liquid chromatography, were indistinguishable. We conclude that the entire pyrC gene is present on the hybrid plasmid and that the dihydroorotase produced from this plasmid is identical to the wild type.

Dihydroorotase from Escherichia coli. Sulfhydryl group-metal ion interactions.

We have obtained 53 mg of 99% pure dihydroorotase from 10.9 g of frozen Escherichia coli pyrC plasmid-containing E. coli cells using a 4-step 16-fold purification procedure, a yield of 60%. We characterize the enzyme by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (a dimer of subunit molecular weight 38,300 +/- 2,900), high performance liquid chromatography gel sieving, amino acid analysis, amino terminus determination (blocked), and specific activity. The isolated enzyme contains 1 tightly bound essential zinc atom/subunit, and readily but loosely binds 2 additional Zn(II) or Co(II) ions/subunit which modulate catalytic activity; treatment of crude extracts with weak chelators suggests that the enzyme contains 3 zinc atoms/subunit in vivo. Two of the 6 thiol groups/subunit react rapidly with 5,5'-dithiobis(2-nitrobenzoate) when 1 Zn/subunit enzyme is used, but slowly when 3 Zn/subunit enzyme is used. The 2 weakly bound Zn(II) ions/subunit protect against the reversible air oxidation which lowers the specific activity of the enzyme and renders it unreactive with 5,5'-dithiobis(2-nitrobenzoate). The dilution activation observed in the presence of substrate, the dilution inactivation observed in the absence of substrate, and the transient activation by the metal chelator oxalate are interpreted as evidence for an unstable, hyperactive monomer.

The Hofmeister effect and the behaviour of water at interfaces.

Starting from known properties of non-specific salt effects on the surface tension at an air-water interface, we propose the first general, detailed qualitative molecular mechanism for the origins of ion-specific (Hofmeister) effects on the surface potential difference at an air-water interface; this mechanism suggests a simple model for the behaviour of water at all interfaces (including water-solute interfaces), regardless of whether the non-aqueous component is neutral or charged, polar or non-polar. Specifically, water near an isolated interface is conceptually divided into three layers, each layer being I water-molecule thick. We propose that the solute determines the behaviour of the adjacent first interfacial water layer (I1); that the bulk solution determines the behaviour of the third interfacial water layer (I3), and that both I1 and I3 compete for hydrogen-bonding interactions with the intervening water layer (I2), which can be thought of as a transition layer. The model requires that a polar kosmotrope (polar water-structure maker) interact with I1 more strongly than would bulk water in its place; that a chaotrope (water-structure breaker) interact with I1 somewhat less strongly than would bulk water in its place; and that a non-polar kosmotrope (non-polar water-structure maker) interact with I1 much less strongly than would bulk water in its place. We introduce two simple new postulates to describe the behaviour of I1 water molecules in aqueous solution. The first, the 'relative competition' postulate, states that an I1 water molecule, in maximizing its free energy (--delta G), will favour those of its highly directional polar (hydrogen-bonding) interactions with its immediate neighbours for which the maximum pairwise enthalpy of interaction (--delta H) is greatest; that is, it will favour the strongest interactions. We describe such behaviour as 'compliant', since an I1 water molecule will continually adjust its position to maximize these strong interactions. Its behaviour towards its remaining immediate neighbours, with whom it interacts relatively weakly (but still favourably), we describe as 'recalcitrant', since it will be unable to adjust its position to maximize simultaneously these interactions.(ABSTRACT TRUNCATED AT 400 WORDS)

Dihydroorotase from Escherichia coli. Purification and characterization.

Dihydroorotase (4,5-L-dihydroorotate amidohydrolase (EC 3.5.2.3], which catalyzes the reversible cyclization of N-carbamyl-L-aspartate to dihydro-L-orotate, has been purified to homogeneity from an over-producing strain of Escherichia coli. Treatment of 70 g of frozen cell paste produces about 7 mg of pure enzyme, a yield of about 35%. The native molecular weight, determined by equilibrium sedimentation, is 80,900 +/- 4,300. The subunit molecular weight, determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis is 38,400 +/- 2,600, and by amino acid analysis is 41,000. The enzyme is thus a dimer and contains 0.95 +/- 0.08 tightly bound zinc atoms per subunit when isolated by the described procedure, which would remove any loosely bound metal ions. Isoelectric focusing under native conditions yields a major species at isoelectric point 4.97 +/- 0.27 and a minor species at 5.26 +/- 0.27; dihydroorotase activity is proportionately associated with both bands. The enzyme has a partial specific volume of 0.737 ml/g calculated from the amino acid composition and a specific absorption at 278 nm of 0.638 for a 1 mg/ml solution. At 30 degrees C, the Michaelis constant and kcat for dihydro-DL-orotate (at pH 8.0) are 0.0756 mM and 127 s-1, respectively; for N-carbamyl-DL-aspartate (at pH 5.80), they are 1.07 mM and 195 s-1.

Purification of aqueous ethylene glycol.

Reagent-grade ethylene glycol has been shown to contain substantial amounts of aldehydes, peroxides, iron, and uv-absorbing hydrocarbons. These impurities can be removed by reduction with sodium borohydride, dilution with H2O, passing through a train of four columns, and filtering through a 0.45-micron filter. The product is stable for at least several months and perhaps much longer; storage under nitrogen in acid-washed dark bottles is preferable. Ten liters of 25% (v/v) aqueous ethylene glycol can easily be purified in about 1 week using equipment commonly available in a biochemical laboratory. This purification is also applicable to aqueous glycerol.