Rice Husk with PLA: 3D Filament Making and Additive Manufacturing of Samples for Potential Structural Applications.

Additive manufacturing has garnered significant attention as a versatile method for fabricating green and complex composite materials. This study delves into the fabrication of polymer composites by employing polylactic acid (PLA) in conjunction with rice husk as a reinforcing filler. The filaments were made by an extruded filament maker and then were used to make tensile and impact samples by another extrusion technology, fused deposition modeling (FDM). The structural and morphological characteristics of the composite materials were analyzed using scanning electron microscopy SEM. Results show that both the filament and samples are very reliable in producing polymer parts with this rice husk solid waste. This research contributes to increasing materials' circularity and potentially creating a local social economy around rice production, where this waste is not much used.

Enhancing Thermomechanical Strength and Thermal Stability of Poly(dicyclopentadiene) Composites through Cost-Effective Fly Ash Reinforcement for Structural and Impact Applications.

Poly(dicyclopentadiene) (poly-DCPD) is a thermoset with potential for high-performance applications. In this research, epoxy resin was blended with different concentrations of fly ash class F particles at 0.0, 1.0, 10.0, and 50.0 wt.%, aiming to improve its use as a high-volume structural material by decreasing costs and reducing its negative environmental impact through using fly ash particles. A planetary Thinky mixer was used to initially mix the resin with the curing agent, followed by incorporating a Grubbs catalyst. The microstructures were analyzed using scanning electron microscopy (SEM), where particles were found to be homogeneously distributed over the polymer matrix. The thermomechanical behavior was evaluated via curing, compression, dynamic mechanical analysis (DMA), and thermo-gravimetric analysis (TGA). Nanoindentation tests were also conducted. Fly ash was found to decelerate the curing of the resin through the release of calcium ions that enhanced the exothermic reaction.

Experimental investigation on composites incorporating rice husk nanoparticles for environmental noise management.

Environmental noise characteristics are determined by factors besides its source. One such factor is reverberation time, which in city canyons tends to be high due to the reflective characteristics of materials commonly used in building facades. Incorporating sound absorbing materials into building facades can help improve urban environments. This research evaluates different facade materials (concrete mix, mortar mix, vinyl spackling, and epoxy resin) incorporated with rice husk nanoparticles (NPs). Rice husk, in addition to presenting good properties for acoustic absorption, is one of the main agricultural wastes worldwide. Additionally, the characteristic of rice husk nanoparticles is correlated with milling time (longer grinding times enhance production of rice husk NPs). Sound absorption coefficients levels increase for compounds with a greater amount of rice husk NPs.

Additive manufacturing against the Covid-19 pandemic: a technological model for the adaptability and networking.

This investigation analyzes the main contributions that additive manufacturing (AM) technology provides to the world in fighting against the pandemic COVID-19 from a materials and applications perspective. With this aim, different sources, which include academic reports, initiatives, and industrial companies, have been systematically analyzed. The AM technology applications include protective masks, mechanical ventilator parts, social distancing signage, and parts for detection and disinfection equipment (Ju, 2020). There is a substantially increased number of contributions from AM technology to this global issue, which is expected to continuously increase until a sound solution is found. The materials and manufacturing technologies in addition to the current challenges and opportunities were analyzed as well. These contributions came from a lot of countries, which can be used as a future model to work in massive collaboration, technology networking, and adaptability, all lined up to provide potential solutions for some of the biggest challenges the human society might face in the future.

Useful tools for integrating noise maps about noises other than those of transport, infrastructures, and industrial plants in developing countries: Casework of the Aburra Valley, Colombia.

The behavior of environmental noise in developing countries is conditioned by characteristics that are not only linked to transport, infrastructures, and industrial plants in the annuity (common representation in noise maps), but also to other types of sources and periodicities that can influence significantly in noise levels. For this reason, this work proposes different temporal analyzes during the annuity that can be linked to the noisy activities typical of developing tropical countries. To do this, a noise monitoring network composed of seven monitors representing different sources present in the Aburrá Valley (AV) in Colombia is analyzed with measurements of LAeq, every hour, in a period between August 2016 and July 2019. The results show that AV noise is strongly influenced by leisure activities related to high-power sound systems, different celebrations, and continuous noise from car traffic that affect the population mainly on weekends and nights. This work marks a clear path to precisely address noise pollution in the action plans of developing countries.

A Combined Strategy of Additive Manufacturing to Support Multidisciplinary Education in Arts, Biology, and Engineering.

This research presents results for the design and creation of supporting teaching materials using additive manufacturing. The materials are inspired by selected artwork of four animal species, which belong to a collection from the museum of the University of Antioquia. The topic selected was fauna in Colombia, and the animals in question were chosen based on important roles they have in areas like health, the environment, and food. These animals will complement science education given to several age groups visiting the museum. In addition to the 3D-manufactured objects, a study was conducted using several age groups that are very relevant to the museum: children, teenagers, and first year undergraduate students. A video showing technical information cards about the manufacturing process was also developed. This project was multidisciplinary, involving collaboration between the engineering school, the museum, and a local high school. The results showed that young visitors want complete information on the animals and to have interaction with the animal models, which is not always possible. This project serves as a local strategy not only for taking arts and knowledge out of the museum but also for planning first year courses in the university and thus reducing problems like school dropout, low motivation, and poor performance in national exams.

Fique Fabric: A Promising Reinforcement for Polymer Composites.

A relatively unknown natural fiber extracted from the leaves of the fique plant, native of the South American Andes, has recently shown potential as reinforcement of polymer composites for engineering applications. Preliminary investigations indicated a promising substitute for synthetic fibers, competing with other well-known natural fibers. The fabric made from fique fibers have not yet been investigated as possible composite reinforcement. Therefore, in the present work a more thorough characterization of fique fabric as a reinforcement of composites with a polyester matrix was performed. Thermal mechanical properties of fique fabric composites were determined by dynamic mechanical analysis (DMA). The ballistic performance of plain woven fique fabric-reinforced polyester matrix composites was investigated as a second layer in a multilayered armor system (MAS). The results revealed a sensible improvement in thermal dynamic mechanical behavior. Both viscoelastic stiffness and glass transition temperature were increased with the amount of incorporated fique fabric. In terms of ballistic results, the fique fabric composites present a performance similar to that of the much stronger KevlarTM as an MAS second layer with the same thickness. A cost analysis indicated that armor vests with fique fabric composites as an MAS second layer would be 13 times less expensive than a similar creation made with Kevlar™.

Flame-retardant electrical conductive nanopolymers based on bisphenol F epoxy resin reinforced with nano polyanilines.

Both fibril and spherical polyaniline (PANI) nanostructures have successfully served as nanofillers for obtaining epoxy resin polymer nanocomposites (PNCs). The effects of nanofiller morphology and loading level on the mechanical properties, rheological behaviors, thermal stability, flame retardancy, electrical conductivity, and dielectric properties were systematically studied. The introduction of the PANI nanofillers was found to reduce the heat-release rate and to increase the char residue of epoxy resin. A reduced viscosity was observed in both types of PANI-epoxy resin liquid nanosuspension samples at lower loadings (1.0 wt % for PANI nanospheres; 1.0 and 3.0 wt % for PANI nanofibers), the viscosity was increased with further increases in the PANI loading for both morphologies. The dynamic storage and loss modulii were studied, together with the glass-transition temperature (T(g)) being obtained from the peak of tan δ. The critical PANI nanofiller loading for the modulus and T(g) was different, i.e., 1.0 wt % for the nanofibers and 5.0 wt % for the nanospheres. The percolation thresholds of the PANI nanostructures were identified with the dynamic mechanical property and electrical conductivity, and, because of the higher aspect ratio, nanofibers reached the percolation threshold at a lower loading (3.0 wt %) than the PANI nanospheres (5.0 wt %). The PANI nanofillers could increase the electrical conductivity, and, at the same loading, the epoxy nanocomposites with the PANI nanofibers showed lower volume resistivity than the nanocomposites with the PANI nanospheres, which were discussed with the contact resistance and percolation threshold. The tensile test indicated an improved tensile strength of the epoxy matrix with the introduction of the PANI nanospheres at a lower loading (1.0 wt %). Compared with pure epoxy, the elasticity modulus was increased for all the PNC samples. Moreover, further studies on the fracture surface revealed an enhanced toughness. Finally, the real permittivity was observed to increase with increasing the PANI loading, and the enhanced permittivity was analyzed by the interfacial polarization.

Magnetic carbon nanostructures: microwave energy-assisted pyrolysis vs. conventional pyrolysis.

Magnetic carbon nanostructures from microwave assisted- and conventional-pyrolysis processes are compared. Unlike graphitized carbon shells from conventional heating, different carbon shell morphologies including nanotubes, nanoflakes and amorphous carbon were observed. Crystalline iron and cementite were observed in the magnetic core, different from a single cementite phase from the conventional process.

Polyaniline stabilized magnetite nanoparticle reinforced epoxy nanocomposites.

Magnetic epoxy polymer nanocomposites (PNCs) reinforced with magnetite (Fe(3)O(4)) nanoparticles (NPs) have been prepared at different particle loading levels. The particle surface functionality tuned by conductive polyaniline (PANI) is achieved via a surface initiated polymerization (SIP) approach. The effects of nanoparticle loading, surface functionality, and temperature on both the viscosity and storage/loss modulus of liquid epoxy resin suspensions and the physicochemical properties of the cured solid PNCs are systematically investigated. The glass transition temperature (T(g)) of the cured epoxy filled with the functionalized NPs has shifted to the higher temperature in the dynamic mechanical analysis (DMA) compared with that of the cured pure epoxy. Enhanced mechanical properties of the cured epoxy PNCs filled with the functionalized NPs are observed in the tensile test compared with that of the cured pure epoxy and cured epoxy PNCs filled with as-received NPs. The uniform NP distribution in the cured epoxy PNCs filled with functionalized NPs is observed by scanning electron microscope (SEM). These magnetic epoxy PNCs show the good magnetic properties and can be attached by a permanent magnet. Enhanced interfacial interaction between NPs and epoxy is revealed in the fracture surface analysis. The PNCs formation mechanism is also interpreted from the comprehensive analysis based on the TGA, DSC, and FTIR in this work.

Morphological variations in cadmium sulfide nanocrystals without phase transformation.

A very novel phenomenon of morphological variations of cadmium sulfide (CdS) nanorods under the transmission electron microscopy (TEM) beam was observed without structural phase transformation. Environmentally stable and highly crystalline CdS nanorods have been obtained via a chemical bath method. The energy of the TEM beam is believed to have a significant influence on CdS nanorods and may melt and transform them into smaller nanowires. Morphological variations without structural phase transformation are confirmed by recording selected area electron diffraction at various stages. The prepared CdS nanorods have been characterized by X-ray powder diffraction, TEM, UV-Vis spectroscopy, and photoluminescence spectroscopy. The importance of this phenomenon is vital for the potential application for CdS such as smart materials.