Expanded pediatric cardiovascular simulator for research and training.

A mock circulation system has been developed to approximate key anatomic features and simulate the pressures and flows of an infant. Pulsatile flow is generated by 10 cc pulsatile ventricles (Utah infant ventricular assist device). Systemic vasculature is mimicked through the use of 3/8" ID bypass tubing with two flexible reservoirs to provide compliance. Vascular resistance, including pulmonary, aortic, and major branches, is controlled via a series of variable pinch clamps. The coronary branch has a dynamic resistor so that the majority of flow occurs during diastole. The system is instrumented to measure key pressures and flows. Right atrial pressure, left atrial pressure, pulmonary artery pressure, and mean aortic pressure are measured with high-fidelity pressure catheters (Millar Instruments, Houston, TX). Flows are measured by transit time ultrasonic flow probes (Transonic Systems, Ithaca, NY) in the pulmonary artery, aorta, coronary artery, and brachiocephalic artery along with assist device flow. The system can be tuned to create the hemodynamic values of a pediatric patient under normal or heart failure conditions. Once tuned to the desired hemodynamic conditions, the loop may be used to test the performance of various circulatory support systems including the intra-aortic balloon pump, left and right ventricular assist devices, or cardiopulmonary support systems such as extracorporeal membrane oxygenation.

Effect of continuous and pulsatile flow left ventricular assist on pulsatility in a pediatric animal model of left ventricular dysfunction: pilot observations.

Pediatric ventricular assist devices are being developed that can produce pulsatile flow (PF) or continuous flow (CF). An important aspect of choosing between these two modes is understanding the consequences of each mode on pediatric vascular pulsatility. Differences in vascular pulsatility generated by PF and CF operation of the 3-inch pediatric cardiopulmonary assist system (pCAS, Ension, Inc., Pittsburgh, PA) were investigated while providing left atrium-to-aorta left ventricular assist (LVA), using an infant animal model of left ventricular dysfunction. Hemodynamic data were digitally recorded with the pCAS providing LVA at incremental flow rates while operating in continuous mode, pulsatile mode at 100 bpm, and pulsatile mode at 140 bpm. These data were used to calculate vascular input impedance (Zart), energy equivalent pressure, and surplus hemodynamic energy as indices of pulsatility for partial (50% of maximum) and maximum LVA flow. Both CF and PF LVA by the pCAS resulted in favorable hemodynamic rectification of left ventricular dysfunction while generating equivalent flows. PF LVA maintained a greater degree of pulsatility compared with CF, as evidenced by increasing energy equivalent pressure and a lesser drop in surplus hemodynamic energy with increasing pCAS flow. Differences in Zart modulus and phase were indiscernible. The selection of flow mode may have long-term consequences on Zart and end-organ perfusion affecting clinical outcomes in pediatric patients.