Development of gluten-free craft beer: Impact of brewing process on quality attributes and consumer expectations for sensory properties.

To date, few studies investigated the differences between the two main gluten-free (GF) brewing techniques, such as the use of enzymes and the use of unconventional GF grains in brewing, by consumer perspective. In this study a GF beer brewed with sorghum and quinoa, as brewing adjuncts, was compared to the enzymatic-treated counterpart, in order to evaluate the effect of deglutinization treatment on physicochemical, volatile, and sensory characteristics of final beer. Moreover, the influence of brewing process and raw materials information on consumers' sensory perceptions, willingness to buy (WTB) and willingness to pay (WTP) was also investigated (n = 105 consumers), under blind (B), expected (E), and informed (I) conditions. The enzymatic-treated sample showed comparable physicochemical attributes with the untreated counterpart, except for a significant reduction in color and foam stability (p < 0.05). Non-significant difference between samples was found in the overall liking, WTB, and WTP mean scores in all three sensory test conditions (p > 0.05). The information about the deglutinization treatment had a negative impact on overall liking (p < 0.01), although WTP for both samples was significantly higher in the informed test than in blind condition (p < 0.05). Overall, Check-All-That-Apply test results confirmed that the deglutinization treatment does not affect the beer sensory profile, even if the information about brewing ingredients and technologies may slightly influence the consumers' sensory perception. Therefore, this result proves that it is possible to produce a marketable GF beer, simply by partially replacing 40% of barley malt with unconventional GF grains, without using enzymes for gluten reduction purpose.

Strategies for Producing Low FODMAPs Foodstuffs: Challenges and Perspectives.

In recent years, there has been a growing interest in a diet low in fermentable oligosaccharides, disaccharides, monosaccharides, and polyols (FODMAPs) as a promising therapeutic approach to reduce the symptoms associated with irritable bowel syndrome (IBS). Hence, the development of low FODMAPs products is an important challenge for the food industry, and among the various foodstuffs associated with the intake of FODMAPs, cereal-based products represent an issue. In fact, even if their content in FODMAPs is limited, their large use in diet can be an important factor in developing IBS symptoms. Several useful approaches have been developed to reduce the FODMAPs content in processed food products. Accurate ingredient selection, the use of enzymes or selected yeasts, and the use of fermentation steps carried out by specific lactic bacteria associated with the use of sourdough represent the technical approaches that have been investigated, alone or in combination, to reduce the FODMAPs content in cereal-based products. This review aims to give an overview of the technological and biotechnological strategies applicable to the formulation of low-FODMAPs products, specifically formulated for consumers affected by IBS. In particular, bread has been the foodstuff mainly investigated throughout the years, but information on other raw or processed products has also been reported. Furthermore, taking into account the required holistic approach for IBS symptoms management, in this review, the use of bioactive compounds that have a positive impact on reducing IBS symptoms as added ingredients in low-FODMAPs products is also discussed.

Hydrophobic deep eutectic solvents in the food sector: Focus on their use for the extraction of bioactive compounds.

Hydrophobic Deep Eutectic Solvents (HDESs) represent a novel kind of solvent. While several studies investigated their properties, just a few dealt with their use for extracting and recovering bioactive compounds from raw materials, wastes and by-products, even if HDESs might represent an interesting alternative when producing pharmaceuticals, foodstuffs and cosmetics. Furthermore, their use may contribute to realizing more sustainable green processes. This review focuses on HDESs, with particular emphasis on Natural HDESs, discussing their properties and uses, highlighting their role as extractants in food applications, both from an analytical and processing point of view, and underlining the positive and negative aspects. While of prospective interest, currently the use of HDESs at industrial level remains a challenge, with several aspects needing further investigation. In order to scale-up the process, more research should focus on key issues, such as solute recovery, solvent recycling and extraction yields, as well as potential health hazards.

Drivers of coffee liking: Effect of physicochemical characteristics and aromatic profile on consumers' acceptability of mono-origin and mono-variety coffees.

Few studies have investigated at the same time how physicochemical, volatile, and sensory characteristics affect coffee liking. The aim of this study is to evaluate the influence of geographical origin and variety on physicochemical parameters and volatile compounds composition of mono-origin and mono-variety coffees. Check-all-that-apply (CATA) method was used with the aim of identifying the drivers of coffee liking. Moisture content, bulk density, solubility index, color parameters, and phenols and caffeine content were useful parameters for discriminating Robusta from Arabica variety, but not samples from different origins. The hierarchical cluster and principal component analyses performed on the headspace compositions showed a quite sharp ability to group the samples based on their variety. Based on CATA results, roasted attribute, related to the presence of pyrazines, was considered a positive driver of coffee liking unlike grassy and acidic attributes (associated to the presence of acids and aldehydes, respectively). Findings from this study can be a useful tool for coffee manufacturers for a winning market strategy, helping them in the choice of the most suitable raw materials and process conditions in order to produce a well-balanced beverage by enhancing all the possible positive drivers of acceptability and reducing the negative ones.

Assessment of brewing attitude of unmalted cereals and pseudocereals for gluten free beer production.

In this study, 40% of unmalted gluten free (GF) grains (sorghum, millet, buckwheat, quinoa and amaranth) was used in brewing process, in gelatinized and ungelatinized form, in order to produce GF beer and to extend current knowledge about their suitability as brewing adjuncts. Partial replacement of barley malt with GF grains led to a significant decrease of extract (°P) and alcohol (%v/v) content compared to control beer (p < 0.05), except for quinoa beer (QB). Results from Principal Component Analysis (PCA) highlighted a satisfactory classification of experimental beers according to the two different forms of GF grains (gelatinized and ungelatinized). However, beers brewed with ungelatinized grains (mainly sorghum and quinoa) showed acceptable technological and sensory properties, thus suggesting that the pre-gelatinization step could be bypassed with a view to more environmentally and economically sustainable time-saving process. In addition, all beer samples showed a gluten content higher than 20 ppm.

Glycaemic Index of Gluten-Free Biscuits with Resistant Starch and Sucrose Replacers: An In Vivo and In Vitro Comparative Study.

The glycaemic index (GI) is used to demonstrate the tendency of foods to increase blood glucose and is thus an important characteristic of newly formulated foods to tackle the rising prevalence of diabetics and associated diseases. The GI of gluten-free biscuits formulated with alternate flours, resistant starch and sucrose replacers was determined using in vivo methods with human subjects. The relationship between in vivo GI values and the predicted glycaemic index (pGI) from the in vitro digestibility-based protocols, generally used by researchers, was established. The in vivo data showed a gradual reduction in GI with increased levels of sucrose substitution by maltitol and inulin with biscuits where sucrose was fully replaced, showing the lowest GI of 33. The correlation between the GI and pGI was food formulation-dependent, even though GI values were lower than the reported pGI. Applying a correction factor to pGI tend to close the gap between the GI and pGI for some formulations but also causes an underestimation of GI for other samples. The results thus suggest that it may not be appropriate to use pGI data to classify food products according to their GI.

Metataxonomic and metagenomic approaches for the study of undefined strain starters for cheese manufacture.

Undefined strain starters are used for the production of many traditional and artisanal cheeses. Composition of undefined starters depends on several factors, and the diversity in strains and species significantly affects cheese quality and features. Culture-dependent approaches have long been used for the microbial profiling and functionalities of undefined cultures but underestimate their diversity due to culturability biases. Recently, culture-independent methods, based on high-throughput sequencing (HTS), have been preferred, with a significant boost in resolution power and sensitivity level. Amplicon targeted (AT) metagenomics, based on 16S rRNA sequencing, returned a larger microbiota diversity at genus and, sometimes, at species levels for artisanal starters of several PDO cheeses, but was inappropriate for populations with high strain diversity, and other gene targets were tested in AT approaches. Shotgun metagenomics (total DNA) and metatranscriptomics (total RNA), although are more powerful in depicting diversity and functionality of undefined cultures, have been rarely applied because of some limitations (e.g., high costs and laboriousness, need for bioinformatics skills). The advantages of HTS technologies are undoubted, but some hurdles need to be still overcame (e.g., resolution power, discrepancy between active and inactive cells, robust analytic pipelines, cost and time reduction for integrated approaches) so that HTS become routinary and convenient for defining complexity, microbial interactions (including host-phage relationships) and evolution in cheeses of undefined starters.

Extraction Kinetics of Total Polyphenols, Flavonoids, and Condensed Tannins of Lentil Seed Coat: Comparison of Solvent and Extraction Methods.

The lentil seed coat is a waste by-product still rich in phenolic compounds, specifically condensed tannins. The effect of different solvents, as well as different processes, namely conventional solid-liquid extraction (CSLE) and ultrasound-assisted extraction (UAE), on the extraction yield of specific phenolic compound classes was studied. Four empirical two-parameter models were examined to select the one that better fit the experimental data obtained under different operating conditions. Additionally, ultra-high-pressure liquid chromatography coupled to quadrupole-time-of-flight mass spectrometry (UHPLC-ESI/QTOF-MS) was employed to profile the phenolic compounds obtained under distinct extraction conditions. In the operative conditions adopted here, the bioactive compounds yield achieved using UAE was lower than that obtained with CSLE. The kinetics of polyphenols, flavonoids, and condensed tannins extraction from the lentil seed coat were successfully fitted to the power-law models, yielding mean values of the root mean square < 5.4%, standard error of estimation < 0.53, and coefficient of determination > 0.8. In addition, the UHPLC-ESI/QTOF-MS of the lentil seed coat extracts allowed the putative recognition of nearly 500 compounds, mainly flavonoids and phenolic acids.

Optimization Model of Phenolics Encapsulation Conditions for Biofortification in Fatty Acids of Animal Food Products.

The nutritional quality of animal products is strongly related to their fatty acid content and composition. Nowadays, attention is paid to the possibility of producing healthier foods of animal origin by intervening in animal feed. In this field, the use of condensed tannins as dietary supplements in animal nutrition is becoming popular due to their wide range of biological effects related, among others, to their ability to modulate the rumen biohydrogenation and biofortify, through the improvement of the fatty acids profile, the derivate food products. Unfortunately, tannins are characterized by strong astringency and low bioavailability. These disadvantages could be overcome through the microencapsulation in protective matrices. With this in mind, the optimal conditions for microencapsulation of a polyphenolic extract rich in condensed tannins by spray drying using a blend of maltodextrin (MD) and gum Arabic (GA) as shell material were investigated. For this purpose, after the extract characterization, through spectrophotometer assays and ultra-high-performance liquid chromatography-quadrupole time-of-flight (UHPLC-QTOF) mass spectrometry, a central composite design (CCD) was employed to investigate the combined effects of core:shell and MD:GA ratio on the microencapsulation process. The results obtained were used to develop second-order polynomial regression models on different responses, namely encapsulation yield, encapsulation efficiency, loading capacity, and tannin content. The formulation characterized by a core:shell ratio of 1.5:5 and MD:GA ratio of 4:6 was selected as the optimized one with a loading capacity of 17.67%, encapsulation efficiency of 76.58%, encapsulation yield of 35.69%, and tannin concentration of 14.46 g/100 g. Moreover, in vitro release under varying pH of the optimized formulation was carried out with results that could improve the use of microencapsulated condensed tannins in animal nutrition for the biofortification of derivates.

Pungency perception and liking for pasta filata cheeses in consumers from different Italian regions.

We aimed to investigate whether the sensitivity to capsaicin had an effect on pungency perception of pasta filata cheeses. In addition, we assessed the effect of several individual variables (gender, age, consumer provenance, PROP status and personality traits) on both consumer liking and choice for pasta filata cheeses. Four pasta filata cheeses at two ripening times and 272 subjects from three different Italian locations were used. Based on sensory data, the PCA discriminated sweet (ripened at 2 months) from pungent cheeses (ripened at 12 months). Cheese pungency perception increased with increasing sensitivity to capsaicin (P < 0.001). There was no clear relationship between sensitivity to capsaicin or sensitivity to cheese pungency with cheese liking, whereas a number of other aspects, including sensory attributes and individual consumer characteristics, such as consumer provenance (P < 0.001), gender (P < 0.001) and food neophobia (P < 0.05), affected the liking for different pasta filata cheeses. Consumers who were younger (18-30 y.o.; P < 0.05), female (P < 0.001), unfamiliar with pungent foods (P < 0.0001) and consumers from Potenza (P = 0.001) more often declared to prefer sweet over pungent cheese, whereas in terms of real choice supertasters and neophobic subjects chose the sweet option more often (P = 0.01). In conclusion, sensitivity to capsaicin affected pungency perception in pasta filata cheese, whereas no clear relationship was observed between pungency perception and liking. The contribution of cheese and consumer characteristics on cheese liking and choice in addition to pungency, was confirmed by the differences in declared and real choice for sweet or pungent cheeses.

Gender, Age, Geographical Area, Food Neophobia and Their Relationships with the Adherence to the Mediterranean Diet: New Insights from a Large Population Cross-Sectional Study.

The Mediterranean diet (MD) is associated with many health benefits. The association between the MD and food neophobia (FN) is still unexplored in adults. The present cross-sectional study was aimed to explore the relationships between adherence to the MD, FN, and sociodemographic variables in a large Italian cohort. Familiarity and frequency use (FFI) of prototypical and non-prototypical Mediterranean foods were used to calculate a new adherence index: the Italian Taste Mediterranean Index (ITMI). The FFI of all Mediterranean foods increased with age, while butter, soft drinks, red/cured meat, and sweets were more common in younger people. Accordingly, ITMI increased with age (F2,2384 = 54.11; p < 0.0001). Women recorded a higher ITMI (6.70) than men (6.10). Individuals with high FN showed higher FFI for soft drinks and sweets and lower ones for most typical MD foods, than individuals with low FNs. A decrease of ITMI was recorded with the increase of the FN(F2,2384 = 22.84; p < 0.0001). With ageing, ITMI increased even in individuals with a high FN. The results suggest that FN may negatively affect adherence to the MD, lowering its potential health benefits, in the adult population. Monitoring of food habits, dietary education, and anxiety management, may be valuable tools to control FN and support the adherence to the MD.

Microencapsulation as a Tool for the Formulation of Functional Foods: The Phytosterols' Case Study.

Hypercholesterolemia, which is an increase in total and low-density lipoprotein (LDL) serum cholesterol, is an important risk factor for the development of cardiovascular diseases. Lifestyle modifications underpin any action plan for reducing serum cholesterol. Phytosterols are natural compounds belonging to the triterpenes family. Thanks to their structural analogy with cholesterol, phytosterols have the ability to reduce serum LDL-cholesterol levels. Phytosterols are used to enrich or fortify a broad spectrum of food products. Like unsaturated fatty acids and cholesterol, phytosterols are easily oxidized. Microencapsulation could be a useful tool to overcome this and other drawbacks linked to the use of phytosterols in food fortification. In this review, in addition to explaining the phytosterols' mechanisms of action, a focus on the use of free and encapsulated phytosterols for the formulation of functional foods, taking also into account both technological and legislative issues, is given.

Microbiological Stability and Overall Quality of Ready-To-Heat Meals Based on Traditional Recipes of the Basilicata Region.

The quality of ready meals is affected by several factors that may impair stability and nutritional value. In this work, we evaluated the overall quality of four traditional meals (Basilicata region) prepared according to the cook&chill method, packaged in air or modified atmosphere packaging (MAP; 70% N2 and 30% CO2), and stored at 4 °C for seven days. The shelf-life was determined by Listeria monocytogenes challenge testing and inactivation by microwave (MW) heating was assessed. The counts at the production day were excellent in three meals out of four, whereas one had high levels of spoilage and pathogens both as soon as the preparation and after seven days. MAP was partially effective only against the growth of the aerobic mesophilic species, whereas sensory analysis revealed that MAP may preserve many of sensory attributes. The average shelf-life of the meals ranged from 11 to 13 days, however, the potential shelf-life was undetectable in one out four meals, as L. monocytogenes growth was inhibited two days after the inoculum. In the inoculated meals, MW heating provided a partial inactivation (25%) of the pathogen. The overall quality of type the meals was partially satisfactory; post-cooking contaminations may affect the microbial load and reduce the palatability over the storage period and, above all, may involve biological hazards which consumers' habits may not be able to eliminate.

Preparation and characterization of microencapsulated phytosterols for the formulation of functional foods: Scale up from laboratory to semi-technical production.

Phytosterols were microencapsulated by spray drying in a shell represented by WPI, inulin and chitosan at four different combinations through the formulation of aqueous suspensions. Moreover, two concentrations of Tween 80 (1.25% and 2.50% w/w) and two inlet temperatures (125 °C and 155 °C) were tested. The effect of the different experimental conditions on the process yield and on the microcapsules properties was evaluated. A significant effect of all variables on the microcapsule properties was found. Accordingly, the best performance, with the maximum loading capacity of 25%, was obtained by using only WPI as shell material, Tween 80 at 1.25% and inlet temperature of 155 °C. The process was successfully scaled-up from laboratory equipment to a semi-technical scale keeping the optimal shell formulation and process conditions.

Fortification of dark chocolate with microencapsulated phytosterols: chemical and sensory evaluation.

Chocolate is one of the most consumed delicacies in the world. Nowadays high-cocoa polyphenol-rich chocolates, probiotic chocolates, and prebiotic chocolates are getting more attention. In light of this, dark chocolate containing microencapsulated phytosterols (MPs) has been developed to reduce cholesterol in individuals. In particular, different dark chocolates containing 64, 72 and 85% of cocoa, fortified with 0, 5, 10 and 15% MP have been produced. The obtained chocolates were characterized by a particle size distribution lower than 30 µm and were stable from a chemical point of view. Specifically, peroxide values were always lower than 2 meq O2 per kg of fat, also after three months of storage. The bioaccessibility of phytosterols was comparable with literature values and the antioxidant activity reached a value of 92 µg trolox per g chocolate for samples obtained from 85% of cocoa. Moreover, sensory evaluation demonstrated a positive effect on the acceptability of the functional chocolate produced and a significant effect of the information on the final sample acceptability.

Effect of preservative addition on sensory and dynamic profile of Lucanian dry-sausages as assessed by quantitative descriptive analysis and temporal dominance of sensations.

The quantitative descriptive analysis (QDA) was combined with temporal dominance of sensations (TDS) to assess the sensory properties of Lucanian dry-sausages either added with nitrate, nitrite and l-ascorbic acid (NS), or not (NNS). Both QDA and TDS differentiated the two groups of sausages. NNS products were perceived with higher intensity of hardness (P<0.05) and tended to be perceived with higher intensities of flavor (P<0.10), pepper (P<0.20), and oiliness (P<0.20), while resulting lower in chewiness (P<0.20). TDS showed that in all the sausages hardness was the first dominant attribute; then, in NNS products flavor remained dominant until the end of tasting, whereas in NS products oiliness prevailed. In conclusion, TDS showed that the perception of some textural parameters, such as oiliness, during mastication was more dominant in NS products, whereas using conventional QDA this attribute appeared higher in sausages manufactured without preservatives. Therefore, TDS provided additional information for the description and differentiation of Lucanian sausages.

Encapsulation of health-promoting ingredients: applications in foodstuffs.

Many nutritional experts and food scientists are interested in developing functional foods containing bioactive agents and many of these health-promoting ingredients may benefit from nano/micro-encapsulation technology. Encapsulation has been proven useful to improve the physical and the chemical stability of bioactive agents, as well as their bioavailability and efficacy, enabling their incorporation into a wide range of formulations aimed to functional food production. There are several reviews concerning nano/micro-encapsulation techniques, but none are focused on the incorporation of the bioactive agents into food matrices. The aim of this paper was to investigate the development of microencapsulated food, taking into account the different bioactive ingredients, the variety of processes, techniques and coating materials that can be used for this purpose.

Prediction of the antioxidant activity of extra virgin olive oils produced in the Mediterranean area.

A chemical characterisation was conducted on 75 commercial extra virgin olive oils (EVOO) produced in the years 2011-2012 in Southern Italy from five different olive monovarieties (Coratina, Leccino, Maiatica, Ogliarola del Vulture and Ogliarola del Bradano). The possibility of estimating the antioxidant activity of EVOO by using a chemical index as predictor of this property was considered. In order to build up and validate an antioxidant activity predictive model, the relationship between the antioxidant activity and the chosen chemical parameters was systematically investigated. The results indicated that oil antioxidant activity, measured as IC50, could be satisfactorily predicted, for olive oils from the considered region, by using a simple index, such as the K225 value of oil samples, which represents a spectrophotometric index of the compounds responsible for oil bitterness measured at 225 nm.

Extra virgin olive oil bitterness evaluation by sensory and chemical analyses.

An experimental investigation was performed on blend extra virgin olive oils (EVOOs) from different cultivars and EVOO from different olive monovarieties (Coratina, Leccino, Maiatica, Ogliarola) with the aim to evaluate the possibility of estimating the perceived bitterness intensity by using chemical indices, such as the total phenol content and the compounds responsible for oil bitterness measured spectrophotometrically at 225 nm (K225 value), as bitterness predictors in different EVOO. Therefore, a bitterness predictive model, based on the relationship between the perceived bitterness intensity of the selected stimuli and the chosen chemicals parameters has been built and validated. The results indicated that the oil bitterness intensity could be satisfactorily predicted by using the K225 values of oil samples.

Focused review: agmatine in fermented foods.

Polyamines (PAs) are ubiquitous substances considered to be bioregulators of numerous cell functions; they take part in cell growth, division, and differentiation. These biogenic amines are also involved in tissue repair and in intracellular signaling; in fact, because of their polycationic character, they interact to a large extent with membrane phospholipids and may play an important role in the regulation of membrane-linked enzymes. The intracellular polyamine content derives from the simultaneous regulation of the synthesis, catabolism, uptake, and elimination of the polyamines; furthermore, PAs are present in all cell types at different concentrations, but the highest levels are found in rapid-turnover tissues. In addition to spermidine, spermine, and putrescine, also agmatine (AGM), deriving from arginine and identified in mammals in the 1990s, is a polyamine and several studies have reported its potentially positive role in the production of secretagogues, and in neuronal, vascular, metabolic, and therapeutic functions. Because of the low arginine decarboxylase (ADC) activity in mammalians, the amounts of AGM found in their tissues can be only minimally ascribed to an endogenous de novo synthesis by ADC, while a substantial quantity of AGM may be of dietary origin. Several food products contain only small amounts of polyamines, while higher concentrations can be found in fermented foods. PAs could also be considered as indicators of freshness in fish and meat products; as these moieties are produced during food storage, it would seem to confirm the main role of microorganisms in their synthesis. In particular, high levels of AGM are present in alcoholic beverages, such as wine, beer, sake, which would seem to confirm the role of yeasts in AGM production. Although many biological functions have been attributed to polyamines, high levels of these compounds in foodstuffs can have toxicological effects; however, no safe level for the intake of polyamines in a diet has yet been established. In this paper the presence of AGM in different foodstuffs is discussed, also taking into account the various factors affecting its presence and concentration.