The push-pull principle: an electrostatic actuator concept for low distortion acoustic transducers.

Electrostatic actuators are of particular interest for microsystems (MEMS), and in particular for MEMS audio transducers for use in advanced true wireless applications. They are attractive because of their typically low electrical capacitance and because they can be fabricated from materials that are compatible with standard complementary metal-oxide semiconductor (CMOS) technology. For high audio performance and in particular low harmonic distortion (THD) the implementation of the push-pull principle provides strong benefits. With an arrangement of three electrodes in a conjunct moving configuration on a beam, we demonstrate here for the first time a balanced bending actuator incarnating the push-pull principle operating at low voltages. Our first design already exhibits a harmonic distortion as low as 1.2% at 79 dB using a signal voltage of only 6 Vp and a constant voltage of only ±10 Vdc in a standard acoustic measurement setup. Thus, exceeding our previously reported approach in all three key performance indications at the same time. We expect that our novel electrode configurations will stimulate innovative electrostatic actuator developments for a broad range of applications. In this paper we report the basic theory, the fabrication and the performance of our novel actuator design acting as an audio transducer.

Concept and proof for an all-silicon MEMS micro speaker utilizing air chambers.

MEMS-based micro speakers are attractive candidates as sound transducers for smart devices, particularly wearables and hearables. For such devices, high sound pressure levels, low harmonic distortion and low power consumption are required for industrial, consumer and medical applications. The ability to integrate with microelectronic circuitry, as well as scalable batch production to enable low unit costs, are the key factors benchmarking a technology. The Nanoscopic Electrostatic Drive based, novel micro speaker concept presented in this work essentially comprises in-plane, electrostatic bending actuators, and uses the chip volume rather than the its surface for sound generation. We describe the principle, design, fabrication, and first characterization results. Various design options and governing equations are given and discussed. In a standard acoustical test setup (ear simulator), a MEMS micro speaker generated a sound pressure level of 69 dB at 500 Hz with a total harmonic distortion of 4.4%, thus proving the concept. Further potential on sound pressure as well as linearity improvement is outlined. We expect that the described methods can be used to enhance and design other MEMS devices and foster modeling and simulation approaches.

Electrostatically Driven In-Plane Silicon Micropump for Modular Configuration.

In this paper, an in-plane reciprocating displacement micropump for liquids and gases which is actuated by a new class of electrostatic bending actuators is reported. The so-called "Nano Electrostatic Drive" is capable of deflecting beyond the electrode gap distance, enabling large generated forces and deflections. Depending on the requirements of the targeted system, the micropump can be modularly designed to meet the specified differential pressures and flow rates by a serial and parallel arrangement of equally working pumping base units. Two selected, medium specific micropump test structure devices for pumping air and isopropanol were designed and investigated. An analytical approach of the driving unit is presented and two-way Fluid-Structure Interaction (FSI) simulations of the micropump were carried out to determine the dynamic behavior. The simulation showed that the test structure device designed for air expected to overcome a total differential pressure of 130 kPa and deliver a flow rate of 0.11 sccm at a 265 Hz driving frequency. The isopropanol design is expected to generate 210 kPa and pump 0.01 sccm at 21 Hz. The device is monolithically fabricated by CMOS-compatible bulk micromachining processes under the use of standard materials only, such as crystalline silicon, silicon dioxide and alumina.

A small-gap electrostatic micro-actuator for large deflections.

Common quasi-static electrostatic micro actuators have significant limitations in deflection due to electrode separation and unstable drive regions. State-of-the-art electrostatic actuators achieve maximum deflections of approximately one third of the electrode separation. Large electrode separation and high driving voltages are normally required to achieve large actuator movements. Here we report on an electrostatic actuator class, fabricated in a CMOS-compatible process, which allows high deflections with small electrode separation. The concept presented makes the huge electrostatic forces within nanometre small electrode separation accessible for large deflections. Electrostatic actuations that are larger than the electrode separation were measured. An analytical theory is compared with measurement and simulation results and enables closer understanding of these actuators. The scaling behaviour discussed indicates significant future improvement on actuator deflection. The presented driving concept enables the investigation and development of novel micro systems with a high potential for improved device and system performance.