Resolution and b value dependent structural connectome in ex vivo mouse brain.

Diffusion magnetic resonance imaging has been widely used in both clinical and preclinical studies to characterize tissue microstructure and structural connectivity. The diffusion MRI protocol for the Human Connectome Project (HCP) has been developed and optimized to obtain high-quality, high-resolution diffusion MRI (dMRI) datasets. However, such efforts have not been fully explored in preclinical studies, especially for rodents. In this study, high quality dMRI datasets of mouse brains were acquired at 9.4T system from two vendors. In particular, we acquired a high-spatial resolution dMRI dataset (25 µm isotropic with 126 diffusion encoding directions), which we believe to be the highest spatial resolution yet obtained; and a high-angular resolution dMRI dataset (50 µm isotropic with 384 diffusion encoding directions), which we believe to be the highest angular resolution compared to the dMRI datasets at the microscopic resolution. We systematically investigated the effects of three important parameters that affect the final outcome of the connectome: b value (1000s/mm2 to 8000 s/mm2), angular resolution (10 to 126), and spatial resolution (25 µm to 200 µm). The stability of tractography and connectome increase with the angular resolution, where more than 50 angles is necessary to achieve consistent results. The connectome and quantitative parameters derived from graph theory exhibit a linear relationship to the b value (R2 > 0.99); a single-shell acquisition with b value of 3000 s/mm2 shows comparable results to the multi-shell high angular resolution dataset. The dice coefficient decreases and both false positive rate and false negative rate gradually increase with coarser spatial resolution. Our study provides guidelines and foundations for exploration of tradeoffs among acquisition parameters for the structural connectome in ex vivo mouse brain.

Spectroscopic analysis of chlamydial major outer membrane protein in support of structure elucidation.

Chlamydial major outer membrane protein (MOMP) is the major protein constituent of the bacterial pathogen Chlamydia trachomatis. Chlamydia trachomatis Serovars D-K are the leading cause of genital tract infections which can lead to infertility or ectopic pregnancies. A vaccine against Chlamydia is highly desirable but currently not available. MOMP accounts for ~ 60% of the chlamydial protein mass and is considered to be one of the lead vaccine candidates against C. trachomatis. We report on the spectroscopic analysis of C. trachomatis native MOMP Serovars D, E, F, and J as well as C. muridarum MOMP by size exclusion chromatography multi angle light scattering (SEC MALS), circular dichroism (CD) and attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR). MOMP was purified from the native bacterium grown in either adherent HeLa cells or in different suspension cell lines. Our results confirm that MOMP forms homo-trimers in detergent micelles. The secondary structure composition of C. trachomatis MOMP was conserved across serovars, but different from composition of C. muridarum MOMP with a 13% (CD) to 18% (ATR-FTIR) reduction in ß-sheet conformation for C. trachomatis MOMP. When Serovar E MOMP was isolated from suspension cell lines the α-helix content increased by 7% (CD) to 13% (ATIR-FTIR). Maintenance of a native-like tertiary and quaternary structure in subunit vaccines is important for the generation of protective antibodies. This biophysical characterization of MOMP presented here serves, in the absence of functional assays, as a method for monitoring the structural integrity of MOMP.

Recombinant expression of Chlamydia trachomatis major outer membrane protein in E. Coli outer membrane as a substrate for vaccine research.

BACKGROUND: Chlamydia trachomatis is a human pathogen which causes a number of pathologies, including genital tract infections in women that can result in tubal infertility. Prevention of infection and disease control might be achieved through vaccination; however, a safe, efficacious and cost-effective vaccine against C. trachomatis infection remains an unmet medical need. C. trachomatis major outer membrane protein (MOMP), a ß-barrel integral outer membrane protein, is the most abundant antigen in the outer membrane of the bacterium and has been evaluated as a subunit vaccine candidate. Recombinant MOMP (rMOMP) expressed in E. coli cytoplasm forms inclusion bodies and rMOMP extracted from inclusion bodies results in a reduced level of protection compared to the native MOMP in a mouse challenge model. RESULTS: We sought to target the recombinant expression of MOMP to the E. coli outer membrane (OM). Successful surface expression was achieved with codon harmonization, utilization of low copy number vectors and promoters with moderate strength, suitable leader sequences and optimization of cell culture conditions. rMOMP was extracted from E. coli outer membrane, purified, and characterized biophysically. The OM expressed and purified rMOMP is immunogenic in mice and elicits antibodies that react to the native antigen, Chlamydia elementary body (EB). CONCLUSIONS: C. trachomatis MOMP was functionally expressed on the surface of E. coli outer membrane. The OM expressed and purified rMOMP elicits antibodies that react to the native antigen, Chlamydia EB, in a mouse immunogenicity model. Surface expression of MOMP could provide useful reagents for vaccine research, and the methodology could serve as a platform to produce other outer membrane proteins recombinantly.

Design and Purification of Subunit Vaccines for Prevention of Clostridium difficile Infection.

Clostridium difficile is a gram-positive bacterium responsible for a large proportion of nosocomial infections in the developed world. C. difficile secretes toxins A and B (TcdA and TcdB) and both toxins act synergistically to induce a spectrum of pathological responses in infected individuals ranging from pseudomembranous colitis to C. difficile-associated diarrhea. Toxins A and B have been actively investigated as components of prophylactic vaccine as well as targets for therapeutic intervention with antibodies. Expression of such toxins by recombinant technology is often difficult and may require special handling and adherence to strict safety regulations during the manufacturing process due to the inherent toxicity of the proteins. Both toxins are large proteins (308 kDa and 270 kDa, respectively) and contain distinct domains mediating cell attachment, cellular translocation, and enzymatic (glucosidase) activity. Here we describe methods to produce fragments of Toxin B for their subsequent evaluation as components of experimental C. difficile vaccines. Methods presented include selection of fragments encompassing distinct functional regions of Toxin B, purification methods to yield high quality proteins, and analytical evaluation techniques. The approach presented focuses on Toxin B but could be applied to the other component, Toxin A, and/or to any difficult to express or toxic protein.

Development of a recombinant toxin fragment vaccine for Clostridium difficile infection.

Clostridium difficile infection (CDI) is the major cause of antibiotic-associated diarrhea and pseudomembranous colitis, a disease associated with significant morbidity and mortality. The disease is mostly of nosocomial origin, with elderly patients undergoing anti-microbial therapy being particularly at risk. C. difficile produces two large toxins: Toxin A (TcdA) and Toxin B (TcdB). The two toxins act synergistically to damage and impair the colonic epithelium, and are primarily responsible for the pathogenesis associated with CDI. The feasibility of toxin-based vaccination against C. difficile is being vigorously investigated. A vaccine based on formaldehyde-inactivated Toxin A and Toxin B (toxoids) was reported to be safe and immunogenic in healthy volunteers and is now undergoing evaluation in clinical efficacy trials. In order to eliminate cytotoxic effects, a chemical inactivation step must be included in the manufacturing process of this toxin-based vaccine. In addition, the large-scale production of highly toxic antigens could be a challenging and costly process. Vaccines based on non-toxic fragments of genetically engineered versions of the toxins alleviate most of these limitations. We have evaluated a vaccine assembled from two recombinant fragments of TcdB and explored their potential as components of a novel experimental vaccine against CDI. Golden Syrian hamsters vaccinated with recombinant fragments of TcdB combined with full length TcdA (Toxoid A) developed high titer IgG responses and potent neutralizing antibody titers. We also show here that the recombinant vaccine protected animals against lethal challenge with C. difficile spores, with efficacy equivalent to the toxoid vaccine. The development of a two-segment recombinant vaccine could provide several advantages over toxoid TcdA/TcdB such as improvements in manufacturability.

Effect of alternative aluminum adjuvants on the absorption and immunogenicity of HPV16 L1 VLPs in mice.

Aluminum adjuvants are commonly used in prophylactic vaccines to enhance antigen immunogenicity through induction of high-titer antibody responses. Three major forms of aluminum adjuvants with substantially different physical and chemical properties have been described: aluminum phosphate (AlPO(4)), aluminum hydroxide (AlOH) and amorphous aluminum hydroxyphosphate sulfate (AAHS). Here we describe the effect of these different aluminum adjuvants on the formulation and subsequent immunogenicity in mice of virus-like particles (VLPs) consisting of the L1 protein of Human Papillomavirus (HPV) Type 16. Electron microscopy demonstrated that the physical appearance of the phosphate-containing aluminum adjuvants was markedly different from that of aluminum hydroxide. All three aluminum adjuvants were found to display unique surface charge profiles over a range of pH, while AAHS demonstrated the greatest inherent capacity for adsorption of L1 VLPs. These differences were associated with differences in immunogenicity: anti-HPV L1 VLP responses from mice immunized with AAHS-formulated HPV16 vaccine were substantially greater than those produced by mice immunized with the same antigen formulated with aluminum hydroxide. In addition, HPV L1 VLPs formulated on AAHS also induced a substantial interferon-gamma secreting T cell response to L1 peptides indicating the potential for an enhanced memory response to this antigen. These results indicate that the chemical composition of aluminum adjuvants can have a profound influence on the magnitude and quality of the immune response to HPV VLP vaccines.

A recombinant 63-kDa form of Bacillus anthracis protective antigen produced in the yeast Saccharomyces cerevisiae provides protection in rabbit and primate inhalational challenge models of anthrax infection.

Infection by Bacillus anthracis is preventable by prophylactic vaccination with several naturally derived and recombinant vaccine preparations. Existing data suggests that protection is mediated by antibodies directed against the protective antigen (PA) component of the anthrax toxin complex. PA is an 83-kDa protein cleaved in vivo to yield a biologically active 63-kDa protein. In an effort to evaluate the potential of yeast as an expression system for the production of recombinant PA, and to determine if the yeast-purified rPA63 can protect from a lethal inhalational challenge, the sequence of the 63-kDa form of PA was codon-optimized and expressed in the yeast Saccharomyces cerevisiae. Highly purified rPA63 isolated from Saccharomyces under denaturing conditions demonstrated reduced biological activity in a macrophage-killing assay compared to non-denatured rPA83 purified from Escherichia coli. Rabbits and non-human primates (NHP) immunized with rPA63 and later challenged with a lethal dose of B. anthracis spores were generally protected from infection. These results indicate that epitopes present in the 63-kDa from of PA can protect rabbits and non-human primates from a lethal spore challenge, and further suggest that a fully functional rPA63 is not required in order to provide these epitopes.

Human papillomavirus type 6 virus-like particles present overlapping yet distinct conformational epitopes.

The epitope for a human papillomavirus (HPV) type 6 conformation-dependent, neutralizing monoclonal antibody (mAb) was partially mapped using HPV L1 recombinant virus-like particles (VLPs). The mAb H6.J54 is cross-reactive with the closely related HPV types 6 and 11. By making HPV-6-like amino acid substitutions in the cottontail rabbit papillomavirus (CRPV) major capsid protein L1, we were able to transfer H6.J54 binding activity into a CRPV/HPV-6 hybrid L1 protein. Full binding activity was achieved with only nine amino acid changes and identified a region centred on the HPV-6 residues 49-54. This region has previously been shown to be a critical part of HPV-6 type-specific epitopes. Fine mapping of the region by scanning a series of alanine substitution mutations showed that in HPV-6 VLPs this type-common epitope overlaps HPV-6 type-specific epitopes.

Isolation, structural characterization, and immunological evaluation of a high-molecular-weight exopolysaccharide from Staphylococcus aureus.

Colonization of implanted medical devices by coagulase-negative staphylococci such as Staphylococcus epidermidis is mediated by the bacterial polysaccharide intercellular adhesin (PIA), a polymer of beta-(1-->6)-linked glucosamine substituted with N-acetyl and O-succinyl constituents. The icaADBC locus containing the biosynthetic genes for production of PIA has been identified in both S. epidermidis and S. aureus. Whereas it is clear that PIA is a constituent that contributes to the virulence of S. epidermidis, it is less clear what role PIA plays in infection with S. aureus. Recently, identification of a novel polysaccharide antigen from S. aureus termed poly N-succinyl beta-(1-->6)-glucosamine (PNSG) has been reported. This polymer was composed of the same glycan backbone as PIA but was reported to contain a high proportion of N-succinylation rather than acetylation. We have isolated a glucosamine-containing exopolysaccharide from the constitutive over-producing MN8m strain of S. aureus in order to prepare polysaccharide-protein conjugate vaccines. In this report we demonstrate that MN8m produced a high-molecular-weight (>300,000 Da) polymer of beta-(1-->6)-linked glucosamine containing 45-60% N-acetyl, and a small amount of O-succinyl (approx 10% mole ratio to monosaccharide units). By detailed NMR analyses of polysaccharide preparations, we show that the previous identification of N-succinyl was an analytical artifact. The exopolysaccharide we have isolated is active in in vitro hemagglutination assays and is immunogenic in mice when coupled to a protein carrier. We therefore conclude that S. aureus strain MN8m produces a polymer that is chemically and biologically closely related to the PIA produced by S. epidermidis.

Effect of vaccine delivery system on the induction of HPV16L1-specific humoral and cell-mediated immune responses in immunized rhesus macaques.

There have been numerous studies to assess the immunogenicity of candidate therapeutic and prophylactic vaccines for human papillomavirus (HPV), but few of them have directly compared different vaccines in an immunologically relevant animal system. In the present study, several vaccine delivery systems (VLPs, chimeric VLPs, plasmid DNA, and a replication incompetent adenoviral vector) expressing HPV16L1 were evaluated for their ability to induce HPV16L1 VLP-specific humoral immune responses, including neutralizing antibodies, and cell-mediated immune responses in rhesus macaques. Monkeys immunized with HPV16L1 VLPs mounted a potent humoral response with strongly neutralizing antibodies and a strong L1-specific Th2 response as measured by IL-4 production by CD4+ T cells. Monkeys immunized with plasmid DNA or an adenoviral vector expressing HPV16L1 showed strong Th1/Tc1 responses as measured by IFN-gamma production by CD4+ and/or CD8+ T cells and potent humoral responses, but only weakly neutralizing antibodies. These data demonstrate that the nature of the immune response against HPV16L1 is dramatically different when it is introduced via different delivery systems. Additionally, these findings support the notion that an HPV16L1 VLP-based vaccine will induce the strongly neutralizing antibodies necessary for effective prophylaxis.

Replication-incompetent adenoviral vaccine vector elicits effective anti-immunodeficiency-virus immunity.

Recent studies of human immunodeficiency virus type 1 (HIV-1) infection in humans and of simian immunodeficiency virus (SIV) in rhesus monkeys have shown that resolution of the acute viral infection and control of the subsequent persistent infection are mediated by the antiviral cellular immune response. We comparatively assessed several vaccine vector delivery systems-three formulations of a plasmid DNA vector, the modified vaccinia Ankara (MVA) virus, and a replication incompetent adenovirus type 5 (Ad5) vector-expressing the SIV gag protein for their ability to elicit such immune responses in monkeys. The vaccines were tested either as a single modality or in combined modality regimens. Here we show that the most effective responses were elicited by a replication-incompetent Ad5 vector, used either alone or as a booster inoculation after priming with a DNA vector. After challenge with a pathogenic HIV-SIV hybrid virus (SHIV), the animals immunized with Ad5 vector exhibited the most pronounced attenuation of the virus infection. The replication-defective adenovirus is a promising vaccine vector for development of an HIV-1 vaccine.