ABSTRACT
Air and precipitation samples were analyzed by liquid chromatography tandem mass spectrometry (LC-MS/MS) and gas chromatography mass spectrometry (GC-MS) for pharmaceuticals, personal care products, and other commercial chemicals within the St. Paul/Minneapolis metropolitan area of Minnesota, U.S. Of the 126 chemicals analyzed, 17 were detected at least once. Bisphenol A, N,N-diethyl-meta-toluamide (DEET), and cocaine were the most frequently detected; their maximum concentrations in snow were 3.80, 9.49, and 0.171ng/L and in air were 0.137, 0.370, and 0.033ng/m3, respectively. DEET and cocaine were present in samples of rain up to 14.5 and 0.806ng/L, respectively. Four antibiotics - ofloxacin, ciprofloxacin, enrofloxacin, and sulfamethoxazole - were detected at concentrations up to 10.3ng/L in precipitation, while ofloxacin was the sole antibiotic detected in air at 0.013ng/m3. The X-ray contrast agent iopamidol and the non-steroidal anti-inflammatory drug naproxen were detected in snow up to 228ng/L and 3.74ng/L, respectively, while caffeine was detected only in air at 0.069 and 0.111ng/m3. Benzothiazole was present in rain up to 70ng/L, while derivatives of benzotriazole - 4-methylbenzotriazole, 5-methylbenzotriazole, and 5-chlorobenzotriazole - were detected at concentrations up to 1.5ng/L in rain and 3.4ng/L in snow. Nonylphenol and nonylphenol monoethoxylate were detected once in air at 0.165 and 0.032ng/m3, respectively. Although the sources of these chemicals to atmosphere are not known, fugacity analysis suggests that wastewater may be a source of nonylphenol, nonylphenol monoethoxylate, DEET, and caffeine to atmosphere. The land-spreading of biosolids is known to generate PM10 that could also account for the presence of these contaminants in air. Micro-pollutant detections in air and precipitation are similar to the profile of contaminants reported previously for surface water. This proof of concept study suggests that atmospheric transport of these chemicals may partially explain the ubiquity of these contaminants in the aquatic environment.
ABSTRACT
A method for quantitative characterization of naphthenic acid (NA) isomer groups by carbon number and extent of cyclization was developed and validated with water samples from northern Alberta. Following solid phase extraction, NAs undergo derivatization with N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide (EDC) allowing detection by positive electrospray ionization tandem mass spectrometry (+ESI)-MS/MS. NA-EDC derivatives produce a common product ion by MS/MS, regardless of structure of the starting NA. Thus, approximately constant relative response factors (RRFs) were assumed for the various isomer groups that elute at a given point in the elution gradient (supported by calculated RRFs for individual model NAs), facilitating quantification using a single standard (1-pyrenebutyric acid). To reduce the impact of major background fatty acids on NA data, the method employed an optimized liquid chromatography method that separated straight chain (Z=0) analytes from other NAs. Method validation was performed at two spiking levels (7.72µg and 38.6µg total refined Merichem per 500mL of reagent water) and good accuracy (mean recoveries of 82.4±2.5% and 93.0±2.6%, respectively; range ~50-130%) and precision (<17% RSD) were achieved at both spiking levels for all 60 NA isomer groups. The method also performed well in an independent method comparison study in which method accuracy values of 107%, 120%, and 121% were obtained for 2 spiked reagent waters (1mg/L and 50mg/L NAs) and spiked Athabasca River water (0.035mg/L NAs), respectively. Application of the method to samples from northern Alberta revealed that NA concentrations decreased in the order: process water (52.8mg/L)>tailings pond water (30.6mg/L)>well water (0.086mg/L)>surface water (0.007mg/L), and that samples were distinguishable by NA isomer profile using Principal components analysis.
