Influence of intensity ultrasound on rheological properties and bioactive compounds of araticum (Annona crassiflora) juice.

The use of extracts rich in bioactive compounds is becoming increasingly common in the food, cosmetics, and pharmaceutical industries for the production of functional products. Araticum is a potential fruit to be analyzed due to its content of phenolic compounds, carotenoids and vitamins, with antioxidant properties. Therefore, this study aimed to investigate the effect of ultrasound on total phenolic compounds, total carotenoids, ascorbic acid, color, turbidity and rheology in araticum juice. Response surface methodology based on a central composite design was applied. Araticum juice was subjected to sonication at amplitude levels ranging from 20 to 100 % of the total power (400 W) at a constant frequency of 20 kHz for different durations (2 to 10 min). Morphological analysis was conducted to observe microscopic particles, and viscosity and suitability to rheological models (Newtonian, Power Law, and Herschel-Bulkley) were assessed. The ultrasonic probe extraction method was compared to the control juice. According to the responses, using the desirability function, the optimal conditions for extraction were determined to be low power (low amplitude) applied in a short period of time or low power applied in a prolonged time. These conditions allowed an ultrasonic probe to act on releasing bioactive compounds without degrading them. All three rheological models were suitable, with the Power Law model being the most appropriate, exhibiting non-Newtonian pseudoplastic behavior.

Use of coconut sugar as an alternative agent in osmotic dehydration of strawberries.

This study aimed to evaluate coconut sugar (CS) as an alternative osmotic agent to sucrose for the osmotic dehydration (OD) of strawberries. OD was performed by immersing strawberries cut into 13.6 ± 0.4 mm edge cubes in osmotic solutions of CS or sucrose, at two different concentrations (40% and 60%, w/w), with and without application of vacuum (AV) in the first 20 min of the process. The total OD time was 300 min. Evaluations of the kinetics of solid gain (SG), water loss (WL), and weight reduction (WR) were performed at 30, 60, 120, 180, 240, and 300 min. SG, WL, and WR increased over the OD time and showed values of up to 7.94%, 63.40%, and 55.94%, respectively. AV increased WL, WR, shrinkage, pH, and total color difference and decreased anthocyanin, ascorbic acid (AA), phenolic, and antioxidant contents. The higher concentration led to higher SG, WL, WR, shrinkage, hardness, and lower moisture content, water activity, anthocyanin, AA, phenolic, and antioxidant contents. The use of CS instead of sucrose had little influence on strawberry properties, except pH and color responses. The optimal treatment was using a 60% CS solution without AV, showing a very distinct color change, hardness increased by approximately 4.5 times and maintenance of acidity, anthocyanins, AA, total phenolics, and antioxidants of 38.0%, 39.6%, 11.8%, 30.0%, 31.1%, and 30.3%, respectively, compared to fresh strawberries. PRACTICAL APPLICATION: Osmotic dehydration of fruit is a process traditionally carried out using sucrose. However, increasing health concerns have made consumers seek alternative sugars to sucrose. The use of coconut sugar made it possible to produce osmo-dehydrated strawberries different from the traditional one, maintaining product quality and process efficiency.

Osmotic dehydration: More than water loss and solid gain.

The immersion of food in a hypertonic solution results in an osmotic dehydration process (OD) with the loss of water (WL) from the food to the solution and the gain of solids from the solution (SG) by the food. For this reason, OD is commonly used to produce semi-dehydrated or enriched foods by incorporation. Although the most of OD studies are focused on the WL and SG processes, many publications addresses the physicochemical and nutritional changes resulting from OD in the food matrix and in the osmotic solution. Such changes must be handled in order to improve the quality of the product. This work is a compilation of publications with this approach.

Encapsulation of coffee silverskin extracts by foam mat drying and comparison with powders obtained by spray drying and freeze-drying.

Coffee silverskin is a coproduct that has a rich composition in bioactive compounds. However, most of these compounds are susceptible to the conditions used during food processing and storage. Encapsulation is a process of great interest to increase the stability of these bioactive compounds, and different methods can influence the final characteristics of the product. Therefore, this study aimed to evaluate the encapsulation methods by foam mat drying, spray drying and freeze-drying for producing powder from coffee silverskin extracts. Density, porosity, overrun, and stability foam were evaluated and the physicochemical properties of powders, such as water activity, moisture, wettability, hygroscopicity, solubility, color, antioxidant activity, and total phenolic were determined. The optimal condition required for the feed mixture for foam formation was 7.6% gum arabic, 2% maltodextrin, and 10.4% egg albumin. All methods presented powders with desirable values of water activity, moisture content, and hygroscopicity, being considered stable for storage, and high content of bioactive compounds. Higher temperatures for foam mat drying produced powders with higher encapsulation efficiency (>77%) and longer wettability than lower temperatures (50 and 60°C). Therefore, this study verified that foam mat drying can be considered an efficient and promising method for encapsulating bioactive compounds from coffee silverskin extract. PRACTICAL APPLICATION: Foam mat drying can be considered an alternative method to conventional encapsulation by spray drying and freeze-drying. This method is simple, inexpensive, and generates high-quality products. Optimization of foam properties is necessary to ensure successful drying.

Process optimization and ethanol use for obtaining white and red dragon fruit powder by foam mat drying.

Dragon fruit shows good sensory and nutritional attributes, but it is also highly perishable. Drying is a unitary operation that promotes the reduction of moisture content, extending the useful life of the product. In this study, the elaboration of white and red dragon fruit powder by foam mat drying was studied with optimization of the proportion of foaming agent and stirring time. The use of ethanol and air temperature were evaluated on drying kinetics, effective moisture diffusivity (Deff ), and drying rate (DR). The study was divided into two steps. In the first, density, stability, porosity and overrun foam were evaluated and the optimal condition was determined. For the white and red pulp foams, the optimal conditions were, respectively, 26.88 min and 4.12 kg 100 kg-1 and 23.5 min and 3.44 kg 100 kg-1 . In the second step, the foam was subjected to ethanol pretreatment and convective drying (50 or 70 °C). The best condition involved pretreatment and the highest tested temperature, with the shortest drying time and the highest Deff and DR. PRACTICAL APPLICATION: Foam mat drying is a suitable method for drying perishable fruits, such as dragon fruit. The foam properties need to be optimized to ensure the success of the drying process. The ethanol pretreatment and the drying air temperature influence the drying kinetics. Therefore, determining the optimal process conditions is very important.

Sorption isotherms for food products: study of models agreement

The knowledge of sorption isotherms is important for establishing conditions of storage and of processes like drying. There are several models for fitting sorption isotherms. This work presents a study about the agreement of 40 mathematical models of sorption isotherms to experimental data of 53 food products. The quadratic residual sum and the standard error were the criteria of evaluation. For the major part of the products, the best agreement was obtained with equation of Jaafar and Michalowski, if temperature or saturation pressure were not considered as a variable. For cases where temperature or saturation pressure were considered, the equation of Strohman and Yoerger was the one with the best agreement for most of the products. Ross equation, based on thermodynamics aspects, was also tested for some products, but the agreement was just satisfactory.

Drying kinetics of bananas by natural convection: Influence of temperature, shape, blanching and cultivar / Cinética de secagem de bananas por convecção natural: Influência da temperatura, formato, branqueamento e cultivar

The influence of variables as temperature, solid shape, temperature, branching and cultivar on drying of bananas were studied. Bananas from cv. Prata and D'água, on disk and cylindrical shape, blanched or not, were dehydrated in a tray dryer in natural convection at 40 and 70ºC. Drying behavior was analyzed by using a mathematical model. The exponential model showed good agreement to experimental data (r² 0.93 - 0.99 and standard error: 0.01- 0.05). Temperature presented positive influence on drying rate in all the tested conditions. With respect to the sample shape, the disk shape carried out to significantly higher drying rates only for D'água cultivar without blanching. Blanching was significantly influent, with positive influence, on drying rate of banana cv. Prata at 40º C. The influence of the cultivar did not present a defined tendency.

No presente trabalho, estudou-se a influência de variáveis como temperatura, formato do sólido, branqueamento e cultivar na secagem de bananas. Bananas cultivares Prata e D'água, nos formatos disco e cilindro, branqueadas ou não, foram desidratadas em secador de bandejas com convecção natural nas temperaturas de 40 e 70ºC. O comportamento da secagem foi analisado utilizandose modelagem matemática. O modelo exponencial mostrou bom ajuste aos resultados experimentais (r²: 0,93 - 0,99 e erro de estimativa padrão: 0,01 - 0,04). A temperatura apresentou influência positiva na taxa de secagem em todas as condições testadas. Com relação ao formato das amostras, o formato disco conduziu a taxas de secagem significativamente maiores somente para o cultivar D'água e sem branqueamento. O branqueamento se mostrou significativamente influente, com influência positiva na taxa de secagem da banana Prata a 40º C. A influência da cultivar não apresentou uma tendência definida.

Analysis of osmotic dehydration variables: influences on tomato (Licopersicon esculentum) drying

This work present's a study of tomato osmotic dehidration in a NaCl solution. Solution temperature and concentration, immersion time and agitation had their influences evaluated. Kinetics of moisture content and solid gain were obtained. After the osmotic treatment, the fruits were dried (tray dryer) in a range of 40 to 60ºC in 10 hours. It was observed that temperature and agitation increases moisture reduction, but those variables are more influential on solid gain, what is not interesting. Osmotic treatment was responsible for increasing drying rate in a subsequent convective tray drying. The mathematical model used here was statistically coherent.