A Universal Cosolvent Evaporation Strategy Enables Direct Printing of Perovskite Single Crystals for Optoelectronic Device Applications.

Solution-processed metal halide perovskite (MHP) single crystals (SCs) are in high demand for a growing number of printed electronic applications due to their superior optoelectronic properties compared to polycrystalline thin films. There is an urgent need to make SC fabrication facile, scalable, and compatible with the printed electronic manufacturing infrastructure. Here, a universal cosolvent evaporation (CSE) strategy is presented by which perovskite SCs and arrays are produced directly on substrates via printing and coating methods within minutes at room temperature from drying droplets. The CSE strategy successfully guides the supersaturation via controlled drying of droplets to suppress all crystallization pathways but one, and is shown to produce SCs of a wide variety of 3D, 2D, and mixed-cation/halide perovskites with consistency. This approach works with commonly used precursors and solvents, making it universal. Importantly, the SC consumes the precursor in the droplet, which enables the large-scale fabrication of SC arrays with minimal residue. Direct on-chip fabrication of 3D and 2D perovskite photodetector devices with outstanding performance is demonstrated. The approach shows that any MHP SC can now be manufactured on substrates using precision printing and scalable, high-throughput coating methods.

A Nonionic Alcohol Soluble Polymer Cathode Interlayer Enables Efficient Organic and Perovskite Solar Cells.

The choice of interfacial materials and their properties play a critical role in determining solar cell performance and stability. For compatibility with roll-to-roll printing, it is desirable to develop stable cathode interface layers (CILs) that can be processed over the photoactive layer using orthogonal solvents. In this study, an n-type naphthalene diimide core and oligo (ethylene glycol) side-chain-based conjugated polymer is reported as a universal, efficient CIL for organic and perovskite photovoltaics. Besides good thermal stability and easy processing in alcohol/water, the new CIL is found to possess electron transport properties with an electrical conductivity of 2.3 × 10-6 S cm-1, enabling its use as a CIL with a film thickness of up to ∼35(±2) nm. Utilizing the new CIL, 16% power conversion efficiency (PCE) is achieved for organic solar cells (OSCs) based on the PM6-Y6 photoactive layer (8.9% PCE for no CIL and 15.1% with state-of-the-art CIL, PDINO), and perovskite solar cells from methylammonium lead iodide yielded a PCE of 17.6%. Compared to the reference devices, the new CIL reduced trap-assisted carrier recombination and increased the built-in potential by 80 mV, simultaneously enhancing all photovoltaic parameters. Moreover, new CIL based devices had better photostability with no burn-in losses.

The mRNA degradation factor Xrn1 regulates transcription elongation in parallel to Ccr4.

Co-transcriptional imprinting of mRNA by Rpb4 and Rpb7 subunits of RNA polymerase II (RNAPII) and by the Ccr4-Not complex conditions its post-transcriptional fate. In turn, mRNA degradation factors like Xrn1 are able to influence RNAPII-dependent transcription, making a feedback loop that contributes to mRNA homeostasis. In this work, we have used repressible yeast GAL genes to perform accurate measurements of transcription and mRNA degradation in a set of mutants. This genetic analysis uncovered a link from mRNA decay to transcription elongation. We combined this experimental approach with computational multi-agent modelling and tested different possibilities of Xrn1 and Ccr4 action in gene transcription. This double strategy brought us to conclude that both Xrn1-decaysome and Ccr4-Not regulate RNAPII elongation, and that they do it in parallel. We validated this conclusion measuring TFIIS genome-wide recruitment to elongating RNAPII. We found that xrn1Δ and ccr4Δ exhibited very different patterns of TFIIS versus RNAPII occupancy, which confirmed their distinct role in controlling transcription elongation. We also found that the relative influence of Xrn1 and Ccr4 is different in the genes encoding ribosomal proteins as compared to the rest of the genome.

Single crystal hybrid perovskite field-effect transistors.

The fields of photovoltaics, photodetection and light emission have seen tremendous activity in recent years with the advent of hybrid organic-inorganic perovskites. Yet, there have been far fewer reports of perovskite-based field-effect transistors. The lateral and interfacial transport requirements of transistors make them particularly vulnerable to surface contamination and defects rife in polycrystalline films and bulk single crystals. Here, we demonstrate a spatially-confined inverse temperature crystallization strategy which synthesizes micrometre-thin single crystals of methylammonium lead halide perovskites MAPbX3 (X = Cl, Br, I) with sub-nanometer surface roughness and very low surface contamination. These benefit the integration of MAPbX3 crystals into ambipolar transistors and yield record, room-temperature field-effect mobility up to 4.7 and 1.5 cm2 V-1 s-1 in p and n channel devices respectively, with 104 to 105 on-off ratio and low turn-on voltages. This work paves the way for integrating hybrid perovskite crystals into printed, flexible and transparent electronics.