ABSTRACT
Woody lignocellulosic biomasses comprise the non-edible parts of fruit trees. In recent years, the exploitation of this biomass has been widening in order to mitigate environmental issues. At the same time, this waste could be transformed into a value-added product (active carbon by pyrolysis, isolation of nanocellulose, oils or proteins). For either valorization path, a complete thermo-mechanical characterization is required. A detailed thermo-mechanical study (TGA, DSC, DMA) was performed on two types of lignocellulosic wastes, with and without kernels: on one side, the walnut shells (WS) and the pistachio shells (PsS) and, in the second category, the apricot seeds (AS), the date seeds (DS), and the plum seeds (PS). The results of the sample-controlled thermal analyses (HiRes TGA) evidenced a better resolution of the degradation steps of WS. Kinetic studies conducted also by conventional TGA (Flynn-Wall-Ozawa) and modulated TGA (MTGA) allowed us to make comparative reasonings concerning the degradation of the investigated biomasses. The DMA results revealed the effect of water traces and oil kernels on relaxation and supported the atypical DSC endotherm emphasized in the freezing temperature domain.
ABSTRACT
Nowadays, very coarse wool fibers are considered waste biomass and are discarded at random or burned. Therefore, it is of actual interest to valorize coarse wool fibers as utile products. In this sense, we report herein an environmentally-friendly process for the preparation of a new material based on oxidized wool fibers and designed for efficient adsorption of heavy metals from wastewater. The morphology and the structure of the obtained product were characterized by scanning electron microscopy (SEM) coupled with an X-ray energy-dispersive module (EDX) and by Fourier-transform infrared spectroscopy (FTIR). Likewise, the performances of the oxidized wool fibers for the adsorption of heavy metal cations (Cu2+, Cd2+, Pb2+) from aqueous solutions were tested. The adsorption kinetics data were analyzed by applying the pseudo-first-order (PFO) and pseudo-second-order (PSO) kinetic models. The equilibrium of the adsorption process was investigated by using the Freundlich and Langmuir isotherm models. According to the Langmuir isotherms registered at 300 K, the maximum adsorption capacities of the oxidized wool were found to increase from Cu2+ (9.41 mg/g) and Cd2+ (10.42 mg/g) to Pb2+ (30.71 mg/g). Consequently, the removal efficiency of metal ions was found to vary in the range of 96.8-99.7%. The thermodynamic parameters (e.g., enthalpy, entropy, and Gibbs free energy) were calculated and discussed.
