Potential of agro-industrial residues from the Amazon region to produce activated carbon.

Thousands of tons of residual lignocellulosic biomass are produced and discarded by agroindustries in the Amazon. These biomasses could be harnessed and used in the preparation of activated carbon, in view of the growing demand for this product with high added value, however, little is known about their characteristics, in addition to their potential as precursors of activated carbon. Therefore, the aim of this work was to evaluate the potential of four different biomasses in the preparation and quality of activated carbon. Residues from the processing of the fruits of acai, babassu, Brazil nut, and oil palm were collected, characterized, carbonized, physically activated with CO2, and characterized. The contents of the total extractives, insoluble lignin, minerals, holocellulose, and elemental (CHNS-O) were analyzed. The surface area and surface morphology were determined from the AC produced, and adsorption tests for methylene blue and phenol were performed. The four biomasses showed potential for use in the preparation of CA; the residues presented high contents of lignin (21.83-55.76%) and carbon (46.49-53.79%). AC were predominantly microporous, although small mesopores could be observed. The AC had a surface area of 569.65-1101.26 m2 g-1, a high methylene blue (93-390 mg g-1), and phenol (159-595 mg g-1) adsorption capacities. Babassu-AC stood out compared to the AC of the other analyzed biomasses, reaching the best results.

Thermal Degradation of Carotenoids from Jambu Leaves (Acmella oleracea) during Convective Drying.

Jambu (Acmella oleracea) is a vegetable used in human food. Drying is an alternative to increase the shelf life of the product. High temperatures can induce the degradation of carotenoids and reduce the health benefits of these compounds. This study investigated the effect of the Jambu leaves' drying temperature on the carotenoid composition. It was performed previously by screening 16 plants from different localities based on the total carotenoid content. The process of drying by convection was carried out at temperatures of 35, 40, 50, and 60 °C in an air circulation oven, at an air velocity of 1.4 m/s-1 and a processing time of ~20 h. The drying data were fitted to six mathematical models and the quantification of the carotenoid retention was determined by HPLC-DAD. The study demonstrates that the carotenoid content among the samples collected from the 16 producers varied by 72% (lower-175 ± 16 µg/g, higher-618 ± 46 µg/g). Among the models, the Page model was found to be the most suitable model to explain the variation of the experimental data. The drying process at 40 °C reduces the Jambu leaves' carotenoid content significantly (p < 0.05) (All-trans-ß-carotene-86 ± 2 µg/g, All-trans-lutein-141 ± 0.2 µg/g) but does not alter the carotenoid profile. The occurrence of similar reduction behavior was observed for the different carotenoids at all the temperatures studied. The drying process at 35 °C was the condition that ensured the highest retention of carotenoids, and also a product classified as a very high source of carotenoids (total carotenoids-748 ± 27 µg/g, vitamin A-17 ± 1 µg RAE/g). Thus, this study concludes that a temperature of 35 °C for 14 h (air velocity-1.4 m/s-1) is the best drying condition for Jambu leaves using a low-cost dryer and as a possibility for the preservation and marketing of this Amazonian raw material.

Characterization and Biotechnological Potential of Intracellular Polyhydroxybutyrate by Stigeoclonium sp. B23 Using Cassava Peel as Carbon Source.

The possibility of utilizing lignocellulosic agro-industrial waste products such as cassava peel hydrolysate (CPH) as carbon sources for polyhydroxybutyrate (PHB) biosynthesis and characterization by Amazonian microalga Stigeoclonium sp. B23. was investigated. Cassava peel was hydrolyzed to reducing sugars to obtain increased glucose content with 2.56 ± 0.07 mmol/L. Prior to obtaining PHB, Stigeoclonium sp. B23 was grown in BG-11 for characterization and Z8 media for evaluation of PHB nanoparticles' cytotoxicity in zebrafish embryos. As results, microalga produced the highest amount of dry weight of PHB with 12.16 ± 1.28 (%) in modified Z8 medium, and PHB nanoparticles exerted some toxicity on zebrafish embryos at concentrations of 6.25-100 µg/mL, increased mortality (<35%) and lethality indicators as lack of somite formation (<25%), non-detachment of tail, and lack of heartbeat (both <15%). Characterization of PHB by scanning electron microscopy (SEM), X-ray diffraction (XRD), differential scanning calorimeter (DSC), and thermogravimetry (TGA) analysis revealed the polymer obtained from CPH cultivation to be morphologically, thermally, physically, and biologically acceptable and promising for its use as a biomaterial and confirmed the structure of the polymer as PHB. The findings revealed that microalgal PHB from Stigeoclonium sp. B23 was a promising and biologically feasible new option with high commercial value, potential for biomaterial applications, and also suggested the use of cassava peel as an alternative renewable resource of carbon for PHB biosynthesis and the non-use of agro-industrial waste and dumping concerns.

Synthesis of Mesoporous Zn1-xMxAl2O4 Substituted by Co2+ and Ni2+ Ions and Application in the Photodegradation of Rhodamine B.

A new mesoporous Zn1-xMxAl2O4 photocatalyst was prepared using the metal-chitosan complexation method with different degrees of Zn2+ cation substitution with cobalt and nickel ions (M = Co2+ and Ni2+). Characterization using X-ray diffraction (XRD), Infrared absorption spectrometry (FTIR), energy dispersion spectroscopy (EDS), diffuse reflectance spectrometry (DRS), scanning electron miscoscopy (SEM), transmission electron miscroscopy (TEM), N2 adsorption- desorption isotherms using the Barrett-Joyner-Halenda (BJH) method, thermogravimetric analysis (TG) and differential thermal analysis (DTA) confirmed the formation of the spinel phase and high purity for all samples. N2 adsorption/desorption and size pore distribution confirmed the high surface area. The photocatalytic activity of Zn1-xMxAl2O4 and the effect of replacing Zn2+ ions with Ni2+ and Co2+ on the degradation of rhodamine B under ultraviolet light were studied in detail. The sample containing 0.1 mol of cobalt had the highest removal rate reaching 83%, favored by surface area and material bandgap (109 m2 g-1 and 2.19 eV, respectively).

Quality parameters and thermogravimetric and oxidative profile of Muruci oil ( Byrsonima crassifolia L.) obtained by supercritical CO2

Abstract These researches aimed determine the quality parameters, the nutritional profile, and the thermogravimetric and oxidative behavior of Muruci (Byrsonima crassifolia L .) oil obtained by supercritical CO2 extraction. The results showed an average oil yield of 5.50%. The acidity and peroxide values show good quality and conservation standards, according to the Brazilian legislation. The fatty acid profile indicates a predominance of unsaturated fatty acids with levels above 60%, highlighting the presence of fatty acids omega-6 and omega-9. The thermogravimetric curves showed oil stability at temperatures around 200 °C and exothermic peaks characteristic of mass loss close to 250 °C. The data of oxidative induction time determined by the Rancimat method showed thermal oxidative stability of 20.85 h for the oil obtained. The Fourier transform infrared (FTIR) spectroscopic profile evidenced chemical compounds with predominantly unsaturated structures, confirming its fatty acid profile. Based on the results of the oil analysis, it is possible to recognize the potential of this species in terms of nutritional, functional, and thermo-oxidative stability aspects.

High-Quality Biodiesel Production from Buriti (Mauritia flexuosa) Oil Soapstock.

The buriti palm (Mauritia flexuosa) is a palm tree widely distributed throughout tropical South America. The oil extracted from the fruits of this palm tree is rich in natural antioxidants. The by-products obtained from the buriti palm have social and economic importance as well, hence the interest in adding value to the residue left from refining this oil to obtain biofuel. The process of methyl esters production from the buriti oil soapstock was optimized considering acidulation and esterification. The effect of the molar ratio of sulfuric acid (H2SO4) to soapstock in the range from 0.6 to 1.0 and the reaction time (30⁻90 min) were analyzed. The best conditions for acidulation were molar ratio 0.8 and reaction time of 60 min. Next, the esterification of the fatty acids obtained was performed using methanol and H2SO4 as catalyst. The effects of the molar ratio (9:1⁻27:1), percentage of catalyst (2⁻6%) and reaction time (1⁻14 h) were investigated. The best reaction conditions were: 18:1 molar ratio, 4% catalyst and 14 h reaction time, which resulted in a yield of 92% and a conversion of 99.9%. All the key biodiesel physicochemical characterizations were within the parameters established by the Brazilian standard. The biodiesel obtained presented high ester content (96.6%) and oxidative stability (16.1 h).