Tailoring bisphosphonate-doped titanium films to optimally couple cellular responses and antibacterial activity for biomedical applications.

Titanium (Ti) is widely utilized as an implant material; nonetheless, its integration with bone tissue faces limitations due to a patient's comorbidities. To address this challenge, we employed a strategic approach involving the growth of thin films by spin-coating and surface functionalization with etidronate (ETI), alendronate (ALE), and risedronate (RIS). Our methodology involved coating of Ti cp IV disks with thin films of TiO2, hydroxyapatite (HA), and their combinations (1:1 and 1:2 v/v), followed by surface functionalization with ETI, ALE, and RIS. Bisphosphonate-doped films were evaluated in terms of surface morphology and physical-chemical properties by techniques such as electron microscopy, confocal microscopy, and x-ray photoelectron spectroscopy. The antibacterial potential of bisphosphonates alone or functionalized onto the Ti surface was tested against Staphylococcus aureus biofilms. Primary human bone mesenchymal stem cells were used to determine in vitro cell metabolism and mineralization. Although RIS alone did not demonstrate any antibacterial effect as verified by minimum inhibitory concentration assay, when Ti surfaces were functionalized with RIS, partial inhibition of Staphylococcus aureus growth was noted, probably because of the physical-chemical surface properties. Furthermore, samples comprising TiO2/HA (1:1 and 1:2 v/v) showcased an enhancement in the metabolism of nondifferentiated cells and can potentially enhance the differentiation of osteoblastic precursors. All samples demonstrated cell viability higher than 80%. Addition of hydroxyapatite and presence of bisphosphonates increase the metabolic activity and the mineralization of human bone mesenchymal cells. While these findings hold promise, it is necessary to conduct further studies to evaluate the system's performance in vivo and ensure its long-term safety. This research marks a significant stride toward optimizing the efficacy of titanium implants through tailored surface modifications.

Boosting Titanium Surfaces with Positive Charges: Newly Developed Cationic Coating Combines Anticorrosive and Bactericidal Properties for Implant Application.

Along with poor implant-bone integration, peri-implant diseases are the major causes of implant failure. Although such diseases are primarily triggered by biofilm accumulation, a complex inflammatory process in response to corrosive-related metallic ions/debris has also been recognized as a risk factor. In this regard, by boosting the titanium (Ti) surface with silane-based positive charges, cationic coatings have gained increasing attention due to their ability to kill pathogens and may be favorable for corrosion resistance. Nevertheless, the development of a cationic coating that combines such properties in addition to having a favorable topography for implant osseointegration is lacking. Because introducing hydroxyl (-OH) groups to Ti is essential to increase chemical bonds with silane, Ti pretreatment is of utmost importance to achieve such polarization. In this study, plasma electrolytic oxidation (PEO) was investigated as a new route to pretreat Ti with OH groups while providing favorable properties for implant application compared with traditional hydrothermal treatment (HT). To produce bactericidal and corrosion-resistant cationic coatings, after pretreatment with PEO or HT (Step 1), surface silanization was subsequently performed via immersion-based functionalization with 3-aminopropyltriethoxysilane (APTES) (Step 2). In the end, five groups were assessed: untreated Ti (Ti), HT, PEO, HT+APTES, and PEO+APTES. PEO created a porous surface with increased roughness and better mechanical and tribological properties compared with HT and Ti. The introduction of -OH groups by HT and PEO was confirmed by Fourier transform infrared spectroscopy and the increase in wettability producing superhydrophilic surfaces. After silanization, the surfaces were polarized to hydrophobic ones, and an increase in the amine functional group was observed by X-ray photoelectron spectroscopy, demonstrating a considerable amount of positive ions. Such protonation may explain the enhanced corrosion resistance and dead bacteria (Streptococcus aureus and Escherichia coli) found for PEO+APTES. All groups presented noncytotoxic properties with similar blood plasma protein adsorption capacity vs the Ti control. Our findings provide new insights into developing next-generation cationic coatings by suggesting that a tailorable porous and oxide coating produced by PEO has promise in designing enhanced cationic surfaces targeting biomedical and dental implant applications.

Underestimated microbial infection of resorbable membranes on guided regeneration.

Barrier membranes are critical in creating tissuecompartmentalization for guided tissue (GTR) and bone regeneration (GBR) therapies. More recently, resorbable membranes have been widely used for tissue and bone regeneration due to their improved properties and the dispensable re-entry surgery for membrane removal. However, in cases with membrane exposure, this may lead to microbial contamination that will compromise the integrity of the membrane, surrounding tissue, and bone regeneration, resulting in treatment failure. Although the microbial infection can negatively influence the clinical outcomes of regenerative therapy, such as GBR and GTR, there is a lack of clinical investigations in this field, especially concerning the microbial colonization of different types of membranes. Importantly, a deeper understanding of the mechanisms of biofilm growth and composition and pathogenesis on exposed membranes is still missing, explaining the mechanisms by which bone regeneration is reduced during membrane exposure. This scoping review comprehensively screened and discussed the current in vivo evidence and possible new perspectives on the microbial contamination of resorbable membranes. Results from eligible in vivo studies suggested that different bacterial species colonized exposed membranes according to their composition (collagen, expanded polytetrafluoroethylene (non-resorbable), and polylactic acid), but in all cases, it negatively affected the attachment level and amount of bone gain. However, limited models and techniques have evaluated the newly developed materials, and evidence is scarce. Finally, new approaches to enhance the antimicrobial effect should consider changing the membrane surface or incorporating long-term released antimicrobials in an effort to achieve better clinical success.

Recent advances of polypyrrole conducting polymer film for biomedical application: Toward a viable platform for cell-microbial interactions.

Polypyrrole (PPy) is one of the most studied conductive polymers due to its electrical conductivity and biological properties, which drive the possibility of numerous applications in the biomedical area. The physical-chemical features of PPy allow the manufacture of biocompatible devices, enhancing cell adhesion and proliferation. Furthermore, owing to the electrostatic interactions between the negatively charged bacterial cell wall and the positive charges in the polymer structure, PPy films can perform an effective antimicrobial activity. PPy is also frequently associated with biocompatible agents and antimicrobial compounds to improve the biological response. Thus, this comprehensive review appraised the available evidence regarding the PPy-based films deposited on metallic implanted devices for biomedical applications. We focus on understanding key concepts that could influence PPy attributes regarding antimicrobial effect and cell behavior under in vitro and in vivo settings. Furthermore, we unravel the several agents incorporated into the PPy film and strategies to improve its functionality. Our findings suggest that incorporating other elements into the PPy films, such as antimicrobial agents, biomolecules, and other biocompatible polymers, may improve the biological responses. Overall, the basic properties of PPy, when combined with other composites, electrostimulation techniques, or surface treatment methods, offer great potential in biocompatibility and/or antimicrobial activities. However, challenges in synthesis standardization and potential limitations such as low adhesion and mechanical strength of the film must be overcome to improve and broaden the application of PPy film in biomedical devices.

Effect of Processing Methods of Human Saliva on the Proteomic Profile and Protein-Mediated Biological Processes.

The use of saliva as a protein source prior to microbiological and biological assays requires previous processing. However, the effect of these processing methods on the proteomic profile of saliva has not been tested. Stimulated human saliva was collected from eight healthy volunteers. Non-processed saliva was compared with 0.22 µm filtered, 0.45 µm filtered, and pasteurized saliva, by liquid chromatography-mass spectrometry. Data are available via ProteomeXchange with identifier PXD039248. The effect of processed saliva on microbial adhesion was tested using bacterial and fungus species and in biological cell behavior using HaCaT immortalized human keratinocytes. Two hundred and seventy-eight proteins were identified in non-processed saliva, of which 54 proteins (≈19%) were exclusive. Saliva processing reduced identified proteins to 222 (≈80%) for the 0.22 µm group, 219 (≈79%) for the 0.45 µm group, and 201 (≈72%) for the pasteurized saliva, compared to non-processed saliva. The proteomic profile showed similar molecular functions and biological processes. The different saliva processing methods did not alter microbial adhesion (ANOVA, p > 0.05). Interestingly, pasteurized saliva reduced keratinocyte cell viability. Saliva processing methods tested reduced the proteomic profile diversity of saliva but maintained similar molecular functions and biological processes, not interfering with microbial adhesion and cell viability, except for pasteurization, which reduced cell viability.

Knowledge of bidirectional relationship between diabetes and periodontal disease among diabetes patients: A systematic review.

INTRODUCTION: The bidirectional relationship between diabetes mellitus and periodontal disease has been reported in the literature, suggesting that poor glycemic control is strongly associated with increased risk of developing periodontal disease. Therefore, this systematic review evaluated the level of knowledge of this bidirectional relationship among patients with diabetes. METHODS: This systematic review (protocol CRD42018117902) was conducted according to PRISMA guidelines. The following databases were considered: Medline/PubMed, Scopus, and Web of Science. Search strategy (April 05th , 2021) considered proper combination of keywords and eligibility criteria. The quality of studies was evaluated using the Appraisal tool for Cross-Sectional Studies (AXIS). RESULTS: Among the 328 records identified in the initial search, 24 studies were selected, considering a total of 8,693 patients. All studies used a cross-sectional design. Among the included studies, only five showed prevalence of knowledge higher than 50%, ranging from 5.8% to 75.9%. Interestingly, 58.0% of patients reported that they brush their teeth at least 1x/day, but only four studies reported that the dentist was the main source of information. In terms of methodology and result quality, just one study clearly showed all information evaluated by the AXIS tool. Most of studies did not report sample size calculations and did not used validated questionnaires to assess patient knowledge. CONCLUSION: The results show that less than half of people with diabetes have knowledge about their increased risk for periodontal disease, and often the dentist is not the main source of information to motivate them.

Polymicrobial biofilms related to dental implant diseases: unravelling the critical role of extracellular biofilm matrix.

Biofilms are complex tri-dimensional structures that encase microbial cells in an extracellular matrix comprising self-produced polymeric substances. The matrix rich in extracellular polymeric substance (EPS) contributes to the unique features of biofilm lifestyle and structure, enhancing microbial accretion, biofilm virulence, and antimicrobial resistance. The role of the EPS matrix of biofilms growing on biotic surfaces, especially dental surfaces, is largely unravelled. To date, there is a lack of a broad overview of existing literature concerning the relationship between the EPS matrix and the dental implant environment and its role in implant-related infections. Here, we discuss recent advances in the critical role of the EPS matrix on biofilm growth and virulence on the dental implant surface and its effect on the etiopathogenesis and progression of implant-related infections. Similar to other biofilms associated with human diseases/conditions, EPS-enriched biofilms on implant surfaces promote microbial accumulation, microbiological shift, cross-kingdom interaction, antimicrobial resistance, biofilm virulence, and, consequently, peri-implant tissue damage. But intriguingly, the protagonism of EPS role on implant-related infections and the development of matrix-target therapeutic strategies has been neglected. Finally, we highlight the need for more in-depth analyses of polymicrobial interactions within EPS matrix and EPS-targeting technologies' rationale for disrupting the complex biofilm microenvironment with more outstanding translation to implant applications in the near future.

The race for the optimal antimicrobial surface: perspectives and challenges related to plasma electrolytic oxidation coating for titanium-based implants.

Plasma electrolytic oxidation (PEO) is a low-cost, structurally reliable, and environmentally friendly surface modification method for orthopedic and dental implants. This technique is successful for the formation of porous, corrosion-resistant, and bioactive coatings, besides introducing antimicrobial compounds easily. Given the increase in implant-related infections, antimicrobial PEO-treated surfaces have been widely proposed to surmount this public health concern. This review comprehensively discusses antimicrobial implant surfaces currently produced by PEO in terms of their in vitro and in vivo microbiological and biological properties. We present a critical [part I] and evidence-based [part II] review about the plethora of antimicrobial PEO-treated surfaces. The mechanism of microbial accumulation on implanted devices and the principles of PEO technology to ensure antimicrobial functionalization by one- or multi-step processes are outlined. Our systematic literature search showed that particular focus has been placed on the metallic and semi-metallic elements incorporated into PEO surfaces to facilitate antimicrobial properties, which are often dose-dependent, without leading to cytotoxicity in vitro. Meanwhile, there are concerns over the biocompatibility of PEO and its long-term antimicrobial effects in animal models. We clearly highlight the importance of using clinically relevant infection models and in vivo long-term assessments to guarantee the rational design of antimicrobial PEO-treated surfaces to identify the 'finish line' in the race for antimicrobial implant surfaces.

Bacterial-derived extracellular polysaccharides reduce antimicrobial susceptibility on biotic and abiotic surfaces.

OBJECTIVE: Extracellular biofilm matrix plays a role in reducing bacterial susceptibility against antimicrobials. Since the surface where biofilm is growing modulates microbial accumulation and bacterial-derived exopolysaccharides (EPS) synthesis, this study compared the role of EPS to reduce antimicrobial susceptibility on biotic (dental surface) and abiotic (titanium (Ti) material) surfaces and the effect of remaining matrix-enriched biofilms to promote bacterial recolonization. DESIGN: 48 h Streptococcus mutans UA159 strain biofilms were grown on enamel and Ti surfaces. The medium was supplemented with 1% sucrose, substrate for EPS synthesis, or with 0.5% glucose + 0.5% fructose as control. Chlorhexidine (CHX) 0.2% was used for antimicrobial treatment. Biofilms were collected and the following analyses were considered: viable bacterial counts, biofilm pH, EPS content, and biofilm structure by scanning electron microscopy and confocal laser scanning microscopy (CLSM). Substrate surfaces were analyzed by 3D laser scanning confocal microscope. RESULTS: Enamel surface showed a higher amount of EPS content (p < 0.05), which may be explained by the higher bacterial biomass compared to Ti material. EPS content reduced bacterial susceptibility against antimicrobial treatments for both substrates, compared to EPS control (p < 0.05). However, sucrose-treated cells presented the same magnitude of reduction for Ti or enamel. Interestingly, matrix-enriched biofilms favored bacterial recolonization for both substrates. CONCLUSION: The surface where the biofilm is growing modulates the amount of EPS synthesized and matrix content plays a key role in reducing antimicrobial susceptibility and promoting bacterial recolonization.

The Potential Role of a Surface-Modified Additive-Manufactured Healing Abutment on the Expression of Integrins α2, ß1, αv, and ß6 in the Peri-Implant Mucosa: A Preliminary Human Study.

The stability of peri-implant soft tissues is essential for long-term success. Integrins play a vital role in biological processes through developing and maintaining cell interactions; however, few studies have evaluated the effects of modifications to abutment surfaces on cell adhesion across integrin expression. Therefore, this pilot study assessed the influence of different surface topographies of titanium healing abutments prepared by additive manufacturing (AM) on the gene expression levels of the integrin subunits α2, ß1, αv, and ß6 in the human peri-implant mucosa. Thirteen healthy adults were included. Depending on the number of required implants, the subjects were distributed in different groups as a function of healing abutment topography: group 1 (fully rough surface); group 2 (upper machined + lower rough); group 3 (rough upper surface + lower machined); group 4 (fully machined). A total of 40 samples (n = 10/group) of the peri-implant mucosa around the abutments were collected 30 days after implant placement, and subsequently, the gene expression levels were evaluated using real-time PCR. The levels of gene expression of ß1-subunit integrin were upregulated for individuals receiving fully rough surface abutments compared with the other surface topographies (p < 0.05). However, the healing abutment topography did not affect the gene expression levels of the α2, αv, and ß6 integrin subunits in the human peri-implant mucosa (p > 0.05). This preliminary study suggested that controlled modifications of the surface topography of titanium healing abutments produced by AM may influence the quality of the peri-implant mucosa in the early stages of the soft tissue healing process.

Emerging titanium surface modifications: The war against polymicrobial infections on dental implants.

Dental implants made of titanium (Ti) material is recognized as the leading treatment option for edentulous patients' rehabilitation, showing a high success rate and clinical longevity. However, dental implant surface acts as a platform for microbial adhesion and accumulation once exposed to the oral cavity. Biofilm formation on implant surfaces has been considered the main etiologic factor to induce inflammatory diseases, known as peri-implant mucositis and peri-implantitis; the latter being recognized as the key reason for late dental implant failure. Different factors, such as biofilm matrix production, source of carbohydrate exposure, and cross-kingdom interactions, have encouraged increased microbial accumulation on dental implants, leading to a microbiological community shift from a healthy to a pathogenic state, increasing inflammation and favoring tissue damage. These factors combined with the spatial organization of biofilms, reduced antimicrobial susceptibility, complex microbiological composition, and the irregular topography of implants hamper biofilm control and microbial killing. In spite of the well-known etiology, there is still no consensus regarding the best clinical protocol to control microbial accumulation on dental implant surfaces and treat peri-implant disease. In this sense, different coatings and Ti surface treatments have been proposed in order to reduce microbial loads and control polymicrobial infections on implantable devices. Therefore, this critical review aims to discuss the current evidence on biofilm accumulation on dental implants and central factors related to the pathogenesis process of implant-related infections. Moreover, the potential surface modifications with anti-biofilm properties for dental implant devices is discussed to shed light on further promising strategies to control peri-implantitis.

Cross-kingdom microbial interactions in dental implant-related infections: is Candida albicans a new villain?

Candida albicans, an oral fungal opportunistic pathogen, has shown the ability to colonize implant surfaces and has been frequently isolated from biofilms associated with dental implant-related infections, possibly due to its synergistic interactions with certain oral bacteria. Moreover, evidence suggests that this cross-kingdom interaction on implant can encourage bacterial growth, leading to increased fungal virulence and mucosal damage. However, the role of Candida in implant-related infections has been overlooked and not widely explored or even considered by most microbiological analyses and therapeutic approaches. Thus, we summarized the scientific evidence regarding the ability of C. albicans to colonize implant surfaces, interact in implant-related polymicrobial biofilms, and its possible role in peri-implant infections as far as biologic plausibility. Next, a systematic review of preclinical and clinical studies was conducted to identify the relevance and the gap in the existing literature regarding the role of C. albicans in the pathogenesis of peri-implant infections.

Emerging titanium surface modifications: The war against polymicrobial infections on dental implants

Abstract Dental implants made of titanium (Ti) material is recognized as the leading treatment option for edentulous patients' rehabilitation, showing a high success rate and clinical longevity. However, dental implant surface acts as a platform for microbial adhesion and accumulation once exposed to the oral cavity. Biofilm formation on implant surfaces has been considered the main etiologic factor to induce inflammatory diseases, known as peri-implant mucositis and peri-implantitis; the latter being recognized as the key reason for late dental implant failure. Different factors, such as biofilm matrix production, source of carbohydrate exposure, and cross-kingdom interactions, have encouraged increased microbial accumulation on dental implants, leading to a microbiological community shift from a healthy to a pathogenic state, increasing inflammation and favoring tissue damage. These factors combined with the spatial organization of biofilms, reduced antimicrobial susceptibility, complex microbiological composition, and the irregular topography of implants hamper biofilm control and microbial killing. In spite of the well-known etiology, there is still no consensus regarding the best clinical protocol to control microbial accumulation on dental implant surfaces and treat peri-implant disease. In this sense, different coatings and Ti surface treatments have been proposed in order to reduce microbial loads and control polymicrobial infections on implantable devices. Therefore, this critical review aims to discuss the current evidence on biofilm accumulation on dental implants and central factors related to the pathogenesis process of implant-related infections. Moreover, the potential surface modifications with anti-biofilm properties for dental implant devices is discussed to shed light on further promising strategies to control peri-implantitis.

Resumo Implantes dentários em titânio (Ti) são reconhecidos como principal modalidade terapêutica para a reabilitação oral de pacientes edêntulos, demonstrando uma alta taxa de sucesso e longevidade clínica. No entanto, após inserção no ambiente bucal, os implantes dentários agem como substrato para adesão e acúmulo microbiano. A formação de biofilmes em implantes dentários tem sido considerada o principal fator etiológico para induzir doenças inflamatórias conhecidas como mucosite peri-implantar e peri-implantite, sendo está última reconhecida como principal razão para falha tardia dos implantes dentários. Diferentes fatores têm sido atribuídos por promover o acúmulo microbiano em implantes dentários, levando a uma mudança microbiológica e favorecendo o dano tecidual, como a matriz do biofilme, exposição a carboidratos e interação entre reinos. Esses fatores combinados com a organização espacial de biofilmes, reduzida suscetibilidade microbiana, complexa composição microbiológica e a superfície irregular dos implantes dificultam o controle do biofilme e a morte microbiana. Apesar da etiologia bem conhecida, ainda não há consenso sobre o melhor protocolo clínico para controlar o acúmulo microbiano nas superfícies dos implantes dentários e tratar a doença peri-implantar. Nesse sentido, diferentes coberturas e tratamentos de superfície no Ti têm sido desenvolvidos objetivando a redução dos níveis microbianos e o controle das infecções polimicrobianas em implantes. Portanto, essa revisão crítica objetiva discutir a atual evidência em relação ao acúmulo de biofilmes em implantes dentários e fatores chave relacionados ao processo patogênico das infecções peri-implantares. Além disso, o potencial de alterações de superfícies com propriedades antimicrobianas para implantes dentários é discutido para ressaltar futuras estratégias promissoras no controle da peri-implantite.

Fitting pieces into the puzzle: The impact of titanium-based dental implant surface modifications on bacterial accumulation and polymicrobial infections.

Polymicrobial infection is the main cause of dental implant failure. Although numerous studies have reported the ability of titanium (Ti) surface modifications to inhibit microbial adhesion and biofilm accumulation, the majority of solutions for the utilization of Ti antibacterial surfaces have been testedin in vitro and animal models, with only a few developed surfaces progressing into clinical research. Motivated by this huge gap, we critically reviewed the scientific literature on the existing antibacterial Ti surfaces to help understand these surfaces' impact on the "puzzle" of undesirable dental implant-related infections. This manuscript comprises three main sections: (i) a narrative review on topics related to oral biofilm formation, bacterial-implant surface interactions, and on how implant-surface modifications can influence microbial accumulation; (ii) a critical evidence-based review to summarize pre-clinical and clinical studies in an attempt to "fit pieces into the puzzle" to unveil the best way to reduce microbial loads and control polymicrobial infection around dental implants showed by the current in vivo evidence; and (iii) discussion and recommendations for future research testing emerging antibacterial implant surfaces, connecting basic science and the requirements for future clinical translation. The findings of the present review suggest no consensus regarding the best available Ti surface to reduce bacterial colonization on dental implants. Smart release or on-demand activation surface coatings are a "new piece of the puzzle", which may be the most effective alternative for reducing microbial colonization on Ti surfaces, and future studies should focus on these technologies.

Synthesis of bioactive glass-based coating by plasma electrolytic oxidation: Untangling a new deposition pathway toward titanium implant surfaces.

HYPOTHESIS: Although bioactive glass (BG) particle coatings were previously developed by different methods, poor particle adhesion to surfaces and reduced biological effects because of glass crystallization have limited their biomedical applications. To overcome this problem, we have untangled, for the first time, plasma electrolytic oxidation (PEO) as a new pathway for the synthesis of bioactive glass-based coating (PEO-BG) on titanium (Ti) materials. EXPERIMENTS: Electrolyte solution with bioactive elements (Na2SiO3-5H2O, C4H6O4Ca, NaNO3, and C3H7Na2O6P) was used as a precursor source to obtain a 45S5 bioglass-like composition on a Ti surface by PEO. Subsequently, the PEO-BG coating was investigated with respect to its surface, mechanical, tribological, electrochemical, microbiological, and biological properties, compared with those of machined and sandblasted/acid-etched control surfaces. FINDINGS: PEO treatment produced a coating with complex surface topography, Ti crystalline phases, superhydrophilic status, chemical composition, and oxide layer similar to that of 45S5-BG (~45.0Si, 24.5 Ca, 24.5Na, 6.0P w/v%). PEO-BG enhanced Ti mechanical and tribological properties with higher corrosion resistance. Furthermore, PEO-BG had a positive influence in polymicrobial biofilms, by reducing pathogenic bacterial associated with biofilm-related infections. PEO-BG also showed higher adsorption of blood plasma proteins without cytotoxic effects on human cells, and thus may be considered a promising biocompatible approach for biomedical implants.

Targeting Pathogenic Biofilms: Newly Developed Superhydrophobic Coating Favors a Host-Compatible Microbial Profile on the Titanium Surface.

Polymicrobial infections are one of the most common reasons for inflammation of surrounding tissues and failure of implanted biomaterials. Because microorganism adhesion is the first step for biofilm formation, physical-chemical modifications of biomaterials have been proposed to reduce the initial microbial attachment. Thus, the use of superhydrophobic coatings has emerged because of their anti-biofilm properties. However, these coatings on the titanium (Ti) surface have been developed mainly by dual-step surface modification techniques and have not been tested using polymicrobial biofilms. Therefore, we developed a one-step superhydrophobic coating on the Ti surface by using a low-pressure plasma technology to create a biocompatible coating that reduces polymicrobial biofilm adhesion and formation. The superhydrophobic coating on Ti was created by the glow discharge plasma using Ar, O2, and hexamethyldisiloxane gases, and after full physical, chemical, and biological characterizations, we evaluated its properties regarding oral biofilm inhibition. The newly developed coating presented an increased surface roughness and, consequently, superhydrophobicity (contact angle over 150°) and enhanced corrosion resistance (p < 0.05) of the Ti surface. Furthermore, proteomic analysis showed a unique pattern of protein adsorption on the superhydrophobic coating without drastically changing the biologic processes mediated by proteins. Additionally, superhydrophobic treatment did not present a cytotoxic effect on fibroblasts or reduction of proliferation; however, it significantly reduced (≈8-fold change) polymicrobial adhesion (bacterial and fungal) and biofilm formation in vitro. Interestingly, superhydrophobic coating shifted the microbiological profile of biofilms formed in situ in the oral cavity, reducing by up to ≈7 fold pathogens associated with the peri-implant disease. Thus, this new superhydrophobic coating developed by a one-step glow discharge plasma technique is a promising biocompatible strategy to drastically reduce microbial adhesion and biofilm formation on Ti-based biomedical implants.

Conduta cirúrgica em terceiro molar incluso com geminação / Surgical conduct for impacted third molar with gemination

Este trabalho objetiva apresentar o relato de paciente, sexo feminino, 29 anos de idade que compareceu para exodontia do elemento 38 parcialmente erupcionado. Na radiografia panorâmica observa-se o 38 associado a elemento dentário extranumerário, que se estende do rebordo a bem próximo a basilar, ultrapassando os limites do canal mandibular. Na tomografia cone beam observa-se coroa com diâmetro mesiodistal comproporções elevadas, sendo uma coroa dentária, uma câmara pulpar ampliada e três raízes, compatível com geminação. Duas das raízes estavam acima do canal mandibular e uma abaixo. A conduta cirúrgica proposta foi remoção da coroa e das raízes superiores e sepultamento da inferior, para evitar fratura mandibular e parestesia. Realizou-se acesso, osteotomia para exposição da coroa dentária até a região das furcas, seguida odontosecção para separação da coroa das raízes, clivagem e remoção da coroa. Na remoção do fragmento coronário observa--se presença da raiz mais profunda aderida a coroa, não sendo possível realizar clivagem total. As raízes superiores ao canal foram removidas sem maiores problemas. O alvéolo foi curetado, o retalho reposicionado na sua posição, seguido de sutura. Ressalta-se a importância da solicitação de exames de imagem e do planejamento de modo a evitar possíveis complicações no ato cirúrgico.

This paper reports the case of a 29-year-old female patient who visited the dental clinic for the extraction of partially eruption tooth 38. The panoramic radiograph revealed that tooth 38 was associated with an extranumerary tooth extending from the rim to near the basal lamina, surpassing the limits of the mandibular canal. Cone-beam tomography revealed a dental crown with a large mesio-distal diameter, large pulp chamber and three roots, compatible with gemination. Two of the rootswere above the mandibular canal and one was below. The proposedsurgical conduct was the removal of the crown and upper roots and burying of the lower root to avoid mandibular fracture and paresthesia. The region was accessed and osteotomy was performed to expose the dental crown to the furcation region, followed by sectioning for the separation of the crown from the roots, cleavage and removal of the crown. During this procedure, it was noted that the deepest root was adhered to the crown and complete cleavage was not possible. The roots above the canal were removed without incident. The alveolus was curetted and the flap was repositioned and sutured. This case underscores the importance of imaging exams and adequate planning toavoid possible complications during the act of surgery.

Oral soft-tissue angiolipoma: report of two cases of rare oral lipomatous lesion with emphasis on morphological and immunohistochemical features.

Oral angiolipomas are exceedingly rare and little is known about their morphological and etiological features. Here, we report two cases of oral angiolipoma and discuss their clinicopathological and immunohistochemical features, focusing on endothelial markers. Both lesions presented mature adipocytes interspersed by small blood vessels containing fibrin thrombi. Immunohistochemical analysis showed numerous mast cells and expression of CD34, vascular endothelial growth factor, intercellular adhesion molecule-1, interferon-γ and interleukin 6 in most endothelial and stromal cells. Mast cell-endothelial cell interaction may be responsible for the reactive or neoplastic origin of the vascular proliferation of these entities.