Merging Porphyrins with Gold Nanorods: Self Assembly Construct to High Fluorescent Polyelectrolyte Microcapsules.

Dual probe porphyrin-gold nanorod polyelectrolyte microcapsules were developed to explore the enhancing effects of a plasmonic interface of self-assembled gold nanoparticles in the fluorescence emission from porphyrins loaded into the capsules' core. An analysis of fluorescence lifetime imaging microscopy (FLIM) data reports a notable 105-106-fold increase in the maximum detected photon rates from diffraction-limited spots and an overall six-fold increase in fluorescence as averaged over the whole microcapsule area. Large emission enhancements were correlated with decreases in fluorescence lifetimes. The microcapsule's design proved effective in achieving high fluorescent hybrids and may shed light on new possibilities for advanced materials imaging applications.

Fluorescence Spectroscopy of Porphyrins and Phthalocyanines: Some Insights into Supramolecular Self-Assembly, Microencapsulation, and Imaging Microscopy.

The molecular interactions of anionic tetrasulfonate phenyl porphyrin (TPPS) with poly(amido amine) (PAMAM) dendrimers of generation 2.0 and 4.0 (G2 and G4, respectively) forming H- or J-aggregates, as well as with human and bovine serum albumin proteins (HSA and BSA), were reviewed in the context of self-assembly molecular complementarity. The spectroscopic studies were extended to the association of aluminum phthtalocyanine (AlPCS4) detected with a PAMAM G4 dendrimer with fluorescence studies in both steady state and dynamic state, as well as due to the fluorescence quenching associated to electron-transfer with a distribution of lifetimes. The functionalization of TPPS with peripheral substituents enables the assignment of spontaneous pH-induced aggregates with different and well-defined morphologies. Other work reported in the literature, in particular with soft self-assembly materials, fall in the same area with particular interest for the environment. The microencapsulation of TPPS studies into polyelectrolyte capsules was developed quite recently and aroused much interest, which is well supported and complemented by the extensive data reported on the Imaging Microscopy section of the Luminescence of Porphyrins and Phthalocyanines included in the present review.

Fluorescent dye nano-assemblies by thiol attachment directed to the tips of gold nanorods for effective emission enhancement.

The conjugation of dye-labelled DNA oligonucleotides with gold nanorods has been widely explored for the development of multifunctional fluorescent nanoprobes. Here, we show that the functionalization route is crucial to achieve enhanced emission in dye nano-assemblies based on gold nanorods. By using a tip-selective approach for thiol attachment of dye molecules onto gold nanorods, it was possible to effectively increase the emission by more than 10-fold relatively to that of a free dye. On the other hand, a non-selective approach revealed that indiscriminate surface functionalization has a detrimental effect on the enhancement. Simulations of discrete dipole approximation gave further insight into the surface distribution of plasmon-enhanced emission by confirming that tip regions afford an effective enhancement, while side regions exhibit a negligible effect or even emission quenching. The contrast between dye nano-assemblies obtained from tip- and non-selective functionalization was further characterized by single-particle fluorescence emission. These studies showed that tip-functionalized gold nanorods with an average of only 30 dye molecules have a comparable to or even stronger emission than non-selectively functionalized particles with approximately 10 times more dye molecules. The results herein reported could significantly improve the performance of dye nano-assemblies for imaging or sensing applications.

Extreme Enhancement of Single-Molecule Fluorescence from Porphyrins Induced by Gold Nanodimer Antennas.

Porphyrins are typically weak emitters, which presents challenges to their optical detection by single-molecule fluorescence microscopy. In this contribution, we explore the enhancement effect of gold nanodimer antennas on the fluorescence of porphyrins in order to enable their single-molecule optical detection. Four meso-substituted free-base porphyrins were evaluated: two cationic, one neutral, and one anionic porphyrin. The gold nanodimer antennas are able to enhance the emission from these porphyrins by a factor of 105-106 increase in the maximum detected photon rates. This extreme enhancement is due to the combination of an antenna effect on the excitation rate that is estimated to be above 104-fold and an emission efficiency that corresponds to an increase of 2-10 times in the porphyrin's fluorescence quantum yield.

Core-Assisted Formation of Porphyrin J-Aggregates in pH-Sensitive Polyelectrolyte Microcapsules Followed by Fluorescence Lifetime Imaging Microscopy.

A strategy assisted by an inorganic template was developed to promote the organized self-assembly of meso-(tetrakis)-(p-sulfonatophenyl)porphyrin (TPPS) on pH-sensitive core-shell polyelectrolyte microcapsules (PECs) of poly(styrenesulfonate) (PSS) and poly(allylamine hydrochloride) (PAH). A key feature of this strategy is the use of template CaCO3 microparticles as a nucleation site endorsing inside-outside directional growth of porphyrin aggregates. Using this approach, TPPS self-assembly in positively charged PECs with CaCO3 (PAH/PSS)2PAH as a sequence of layers was successfully achieved using mild pH conditions (pH 3). Evidence for porphyrin aggregation was obtained by UV-vis with the characteristic absorption bands in PECs functionalized with porphyrins. Fluorescence lifetime imaging microscopy (FLIM) of the polyelectrolyte core-shell confirmed the presence of radially distributed needlelike structures sticking out from polyelectrolyte shells. Microscopic images also revealed a sequential process (adsorption, redistribution, and aggregation) for the directional growth (inside/outside) of TPPS aggregates, which highlights the importance of the core in the aggregation induction. Removing the CaCO3 core alters the porphyrin interaction in the PEC environment, and aggregate growth is no longer favored.

Tip-Specific Functionalization of Gold Nanorods for Plasmonic Biosensing: Effect of Linker Chain Length.

Gold nanorods are promising platforms for label-free biosensing. We have functionalized gold nanorods with biotin thiol linkers of increasing chain length and evaluated their ability in the molecular detection of streptavidin. We have found an unexpected effect of the increase in linker length, which resulted in a substantial improvement of the plasmon response at surface saturation. The plasmon peak shift increased from 5 to 14 nm, i.e., more than twice the response, between the short and long biotin linkers. This effect is observed only for site-selective tip functionalization, whereas for a full biotin coating there is no improvement observed with the linker length. The improved plasmon response for tip functionalization is attributed to low biotin coverage but is directed to the most sensitive regions, which, combined with a longer chain linker, reduces the steric hindrance for streptavidin binding on the rod's surface. The model sensors were further characterized by measuring their dose-response curves and binding kinetic assays. Simulations of the discrete dipole approximation give theoretical plasmon shifts that compare well with the experimental ones for the long linker but not with those of the short linker, thus suggesting that steric hindrance affects the latter. Our results highlight the importance of specifically functionalizing the plasmonic hot spots in nanoparticle sensors with the adequate density of receptors in order to maximize their response.

Design of polyelectrolyte core-shells with DNA to control TMPyP binding.

The interaction of DNA with 5,10,15,20-tetrakis(4-N-methylpyridiniumyl)porphyrin (TMPyP) in polyelectrolyte core-shells obtained via layer by layer adsorption of poly(sodium 4-styrenesulfonate), PSS, and poly(allylamine hydrochloride), PAH, polyelectrolytes was followed by steady state, time resolved fluorescence and by Fluorescence Lifetime Imaging Microscopy (FLIM). Our results show that DNA adsorption onto polyelectrolyte core-shell changes the TMPyP interaction within PSS/PAH core-shells structure and increase significantly the TMPyP uptake. Specific DNA/TMPyP interactions are also altered by DNA adsorption favouring porphyrin intercalation onto GC pair rich regions. Circular dichroism (CD) spectra reveal that DNA undergoes important conformational changes upon adsorption onto the core-shell surface, which are reverted upon TMPyP encapsulation.

Evaluation of electrostatic binding of PAMAM dendrimers and charged phthalocyanines by fluorescence correlation spectroscopy.

We have assessed host-guest interactions between PAMAM dendrimers and charged phthalocyanine probes by Fluorescence Correlation Spectroscopy (FCS). Our results show strong binding in water at low ionic strength with an affinity that decreases from KB ∼ 10(9) to 10(8) M(-1) upon decreasing the phthalocyanine charge of z = -4, -2 and -1. The binding affinity also decreases significantly upon salt addition leading to KB values of ca. 10(5)-10(6) M(-1). The changes of binding affinity probed by varying the phthalocyanine charge, and by changing the ionic strength or pH conditions, allowed us to evaluate the electrostatic contribution (Kel) in dendrimer-phthalocyanine interactions. In particular, this approach afforded values of electrostatic potential for PAMAM dendrimers in water at low ionic strength and at dendrimer concentrations in the nanomolar range. The electrostatic potential of PAMAM generations 4 and 7 are around 50 mV in close agreement with theoretical estimates using the Poisson-Boltzmann cell model. Interestingly, the nonelectrostatic binding is significant and contributes even more than electrostatic binding to dendrimer-phthalocyanine interactions. The nonelectrostatic binding contributes to an affinity of KB above 10(5) M(-1), as measured under conditions of low dendrimer charge and high ionic strength, which makes these dendrimers promising hosts as drug carriers.

Structural effects of the ß-vinyl linker in pyridinium porphyrins: spectroscopic studies in organic solvents and AOT reverse micelles.

Two isomeric ß-vinylpyridinium porphyrins, 2-[2-(2-methylpyridinium)vinyl]-5,10,15,20-tetraphenylporphyrin (1, ortho isomer) and 2-[2-(4-methylpyridinium)vinyl]-5,10,15,20-tetraphenylporphyrin (2, para isomer), which have shown different photodynamic behavior were investigated in organic solvents and sodium 1,4-bis(2-ethylhexyl)sulfosuccinate (AOT) reverse micelles. In organic systems, the absorption spectra present a red-shifted band that is more intense in the para isomer, in addition to the usual Soret band. This new band presents interesting solvatochromic effects which obey the multiparametric Kamlet-Taft equation. In AOT reverse micelles, the ortho isomer exhibits a strong dependence with the parameter ω0 = [H2O]/[AOT] which indicates that the molecule resides at the interface toward the organic phase. By contrast, no evidence was detected for the encapsulation of para isomer 2 in AOT reverse micelles. The hypothesis of two ground state isomers with different contributions of trans and quinoid structures is advanced on the basis of the overall data collected from electronic absorption, steady-state, and transient-state fluorescence emission. A charge transfer state in which an electron is fully transferred from the porphyrin to the pyridinium moiety is associated to a quinoid structure in isomer 2. The trans/quinoid relative proportions may be accounted for by the orientation of the ortho-/para-pyridinium isomers relatively to the porphyrin core.

The near-mid-IR HOMO-LUMO gap in amide linked porphyrin-rhodamine dyads.

Novel amide linked porphyrin-rhodamine dyads yield utmost intense red-shifted electronic transitions beyond the near-infrared region.

Electrophilic reactivity of tetrabromorhodamine 123 is bromine induced: convergent interpretation through complementary molecular descriptors.

Nucleophilic addition of water and of methanol to 3,6-diamino-2,4,5,7-tetrabromo-9-[2-(methoxycarbonyl) phenyl]-9H-xanthen-9-ylium, 4BrR123, yields respectively 2-(3,6-diamino-2,4,5,7-tetrabromo-9-hydroxy-9H-xanthen-9-yl)xanthyl benzoate, HO4BrR123 and 2-(3,6-diamino-2,4,5,7-tetrabromo-9-methoxy-9H-xanthen-9-yl)xanthyl benzoate, MeO4BrR123. The novel experimental results are addressed theoretically. The linear free energy relationship, LFER, second-order perturbation theory analysis of the natural bond orbital, NBO, and quantum theory of atoms in molecules, QTAIM, lead to the same conclusion: the electron-withdrawing effect of bonded Br atoms in 4BrR123 extremely enhances the molecular electrophilicity, as compared to 3,6-diamino-9-[2-(methoxycarbonyl) phenyl]-9H-xanthen-9-ylium, R123. The reactivity of these diaminoxanthylium cations is discussed in the context of local and global softness in extended conjugated systems.

Polyelectrolyte-assisted noncovalent functionalization of carbon nanotubes with ordered self-assemblies of a water-soluble porphyrin.

The self-assembly and induced supramolecular chirality of meso-tetrakis(4-sulfonatophenyl)porphyrin (TSPP) on both single-wall (SWCNT) and multiwall carbon nanotubes (MWCNT) are investigated. Under mild pH conditions (pH 3), TSPP forms aggregates when CNTs are dispersed in an aqueous solution containing positively charged polyelectrolytes such as poly-L-lysine (PLL) or poly(allylamine hydrochloride) (PAH). Evidence for the geometry of the porphyrin aggregates is obtained from absorption spectra, whereby the fingerprints of J- and H-aggregates are clearly seen only in the presence of smaller-diameter nanotubes. J-aggregates are better stabilized with PLL, whereas in the presence of PAH mainly H-aggregates prevail. Excited-state interactions within these nanohybrids are studied by steady-state and time-resolved fluorescence. The porphyrin emission intensity in the nanohybrid solution is significantly quenched compared to that of TSPP alone, and this implies strong electronic interaction between CNTs and porphyrin molecules. Fluorescence lifetime imaging microscopy (FLIM) further supports that porphyrin arrays are associated with the MWCNT sidewalls wrapped in PLL. In the case of the SWCNT hybrid, spherical structures associated with longer fluorescence lifetime appeared after one week, indicative of H-aggregates of TSPP. The latter are the result of π-π stacking of porphyrin units on neighboring nanotubes facilitated by the strong tendency of these nanotubes to interact with each other. These results highlight the importance of optimum dimensions and surface-area architectures of CNTs in the control/stability of the porphyrin aggregates with promising properties for light harvesting.

Reorganization of self-assembled dipeptide porphyrin J-aggregates in water-ethanol mixtures.

The self-assembly of a neutral meso-methoxyphenylporphyrin functionalized with a dipeptide glycilglycine substituent (MGG) in water and in water-ethanol mixtures was studied by absorption and fluorescence spectroscopy. In water, hydrophobic interactions and the noncovalent intermolecular hydrogen bonding between the terminal carboxylate group of one porphyrin and the hydrogen atoms of the pyrrolic nitrogens of another porphyrin originate nonspecific disorganized H- and J-aggregates. The addition of ethanol (0.1-25% v/v) to the water creates small clusters within which porphyrin J-aggregates reorganize as revealed by a narrow intense band detected by the Rayleigh light scattering (RLS) at 443 nm. Similar phenomenology is detected in SDS premicellar aggregates. Computational DFT calculations of a model dimer formation stabilized via intermolecular hydrogen bonding estimate an energy gain of -22 kJ mol(-1) and a center-to-center and interplane distances between porphyrin moieties of 16.8 and 3.7 Å, respectively. The kinetics of the J-aggregate formation could be fitted with a time-dependent model, and an activation energy of 96 kJ mol(-1) was estimated. The aggregate's morphology of MGG was followed by transmission electron microscopy (TEM) which showed rod-type structures of 5-8 µm evolving to spherical particles with increased ethanol content. Similar images and sizes were obtained in analogous samples using fluorescence lifetime imaging microscopy (FLIM) and dynamic light scattering (DLS). The formation of excitonically coupled supramolecular MGG structures of brickwork or staircase types is proposed in these water-ethanol mixtures.

Electronic excited-state behavior of rhodamine 3B in AOT reverse micelles sensing contact ion pair to solvent separated ion pair interconversion.

The amphiphile Aerosol OT (1,4-bis(2-ethylhexyl)sodium sulfosuccinate, AOT) forms, in reverse micellar nanoaggregates of water, RM, in isooctane, ion pairs (IPs) with the cationic fluorescent probe dye, rhodamine 3B, (3,6-bis(ethylamino)-9-[2-(ethoxycarbonyl)phenyl]-9H-xanthen-9-ylium, R3B), as either contact ion pairs, CIPs, or solvent (water) separated ion pairs, SSIPs. The ground-state AOT R3B ion pairs' equilibria as well as the dynamics of R3B electronic excited states show the progressive hydration of AOT(-) R3B(+) toward solvent separated ion pairs, SSIPs as the characteristic reverse micelle parameter w(0) = [H(2)O]/[AOT] increases. The apparent limiting hydration constant of R3B ion pairs, K(hyd) = 2.8 +/- 0.2, corresponds to full hydration of AOT, consistent with 1-3 water molecules per AOT polar head. Transient relaxations at w(0) = 0.2, with a 375 +/- 15 ps decay at 550 nm decrease to 115 +/- 15 ps at w(0) = 7.2 turning into corresponding rises at 588 nm. At higher w(0), water induced dynamics becomes faster. The lifetime is longer in RM with smaller w(0), due to the presence of CIPs that inhibit intrinsic nonradiative decay processes, which in contrast shorten the decay times at higher w(0), due to the presence of SSIPs. The pairs' electronic excited-state properties are sensitive to viscosity and local polarity of the surrounding environment of the interfacial regions of AOT reverse micellar nanoaggregates.

Fluorescence lifetime imaging microscopy and fluorescence resonance energy transfer from cyan to yellow fluorescent protein validates a novel method to cluster proteins on solid surfaces.

A novel method to distribute proteins on solid surfaces is proposed. Proteins microencapsulated in the water pool of reverse micelles were used to coat a solid surface with well-individualized round spots of 1 to 3 microm in diameter. The number of spots per unit area can be increased through the concentration of reverse micelles, and networks of spots were obtained at high concentrations of large reverse micelles. Moreover, depending on the pool size of the water reverse micelles, proteins can be deposited far from each other or in close proximity within the range of 50 to 70 A. This proximity obtained with small reverse micelles was proved through fluorescence lifetime imaging microscopy and fluorescence resonance energy transfer (FLIM-FRET) measurements for the most relevant FRET pair in cell biology studies, the cyan and yellow fluorescent proteins. This novel procedure has several advantages and reveals the potential for study of protein-protein interactions on solid surfaces and for developing novel biomaterials and molecular devices based on biorecognition elements.

Molecular dynamics simulations of porphyrin-dendrimer systems: toward modeling electron transfer in solution.

We have performed computational simulations of porphyrin-dendrimer systems--a cationic porphyrin electrostatically associated to a negatively charged dendrimer--using the method of classical molecular dynamics (MD) with an atomistic force field. Previous experimental studies have shown a strong quenching effect of the porphyrin fluorescence that was assigned to electron transfer (ET) from the dendrimer's tertiary amines (Paulo, P. M. R.; Costa, S. M. B. J. Phys. Chem. B 2005, 109, 13928). In the present contribution, we evaluate computationally the role of the porphyrin-dendrimer conformation in the development of a statistical distribution of ET rates through its dependence on the donor-acceptor distance. We started from simulations without explicit solvent to obtain trajectories of the donor-acceptor distance and the respective time-averaged distributions for two dendrimer sizes and different initial configurations of the porphyrin-dendrimer pair. By introducing explicit solvent (water) in our simulations, we were able to estimate the reorganization energy of the medium for the systems with the dendrimer of smaller size. The values obtained are in the range 0.6-1.5 eV and show a linear dependence with the inverse of the donor-acceptor distance, which can be explained by a two-phase dielectric continuum model taking into account the medium heterogeneity provided by the dendrimer organic core. Dielectric relaxation accompanying ET was evaluated from the simulations with explicit solvent showing fast decay times of some tens of femtoseconds and slow decay times in the range of hundreds of femtoseconds to a few picoseconds. The variations of the slow relaxation times reflect the heterogeneity of the dendrimer donor sites which add to the complexity of ET kinetics as inferred from the experimental fluorescence decays.

Ordered self-assembly of protonated porphyrin induced by the aqueous environment of biomimetic systems.

Water-soluble ionic porphyrins show an interesting self-association pattern in acidic conditions under which highly ordered aggregates are stabilized. Herein we give an overview of the template effect of biological interfaces in tetrakis(4-sulfonatophenyl)porphyrin TSPP self-aggregation, in which we point out the possibility of tuning this process by screening the charge repulsion through ionic strength and pH. We give special emphasis to the use of fluorescence lifetime imaging microscopy and of fluorescence correlation spectroscopy to visualize and characterize these molecular aggregates.

Interaction of zinc tetrasulfonated phthalocyanine with cytochrome C in water and Triton-X 100 micelles.

The interaction of a zinc tetrasulfonated phthalocyanine with cytochrome c was studied using steady-state spectroscopic techniques and time-correlated single photon counting in water and Triton-X 100 micelles. The dye forms dimers in water with a high equilibrium constant (70 x 10(6) M(-1)). Because of a specific electrostatic interaction, the presence of cytochrome c does not lead to a dissociation of this dimer, but increases its formation, with an equilibrium constant of about 7.9 x 10(9) M(-1). Triton-X 100 micelles dissociate the dimer, creating two populations of dye molecules: one in a hydrophilic media, probably on the surface of the micelles, another on a hydrophobic environment, probably inside the micelles. However, when cytochrome c is added the dye aggregation is again induced leading to a strong fluorescence quenching. This fluorescence quenching may also be caused by a photoinduced electron-transfer due to the formation of a 1:1 complex between the dye and the protein, but the present work does not give direct evidence of such an effect because the fluorescence decays did not show the presence of an extra component. The results presented here are quite different from those reported for aluminum sulfonated phthalocyanines, where aggregation does not occur and the fluorescence quenching is solely due to photoinduced electron-transfer reactions.

Translational and rotational motions of albumin sensed by a non-covalent associated porphyrin under physiological and acidic conditions: a fluorescence correlation spectroscopy and time resolved anisotropy study.

The interaction between a free-base, anionic water-soluble porphyrin, TSPP, and the drug carrier protein, bovine serum albumin (BSA) has been studied by time-resolved fluorescence anisotropy (TRFA) and fluorescence correlation spectroscopy (FCS) at two different pH-values. Both rotational correlation times and translational diffusion times of the fluorescent species indicate that TSPP binding to albumin induces very little conformational changes in the protein under physiological conditions. By contrast, at low pH, a bi-exponential decay is obtained where a short rotational correlation time (phi (int) = 1.2 ns) is obtained, which is likely associated to wobbling movement of the porphyrin in the protein binding site. These physical changes are corroborated by circular dichroism (CD) data which show a 37% loss in the protein helicity upon acidification of the medium. In the presence of excess porphyrin formation of porphyrin J-aggregates is induced, which can be detected by time-resolved fluorescence with short characteristic times. This is also reflected in FCS data by an increase in molecular brightness together with a decrease in the number of fluorescent molecules passing through the detection volume of the sample.

Self-aggregation of free base porphyrins in aqueous solution and in DMPC vesicles.

Free base porphyrin (PPhe), derivatized with aminosulfonyl groups linked to the aromatic amino acid phenylalanine at the meso-positions, was mixed with DMPC vesicles. The resulting interaction was studied by absorption, steady-state and transient state fluorescence, at different pHs. At pH=2 to pH=9, the aforementioned porphyrin predominates as an aggregated species, with a co-facial arrangement of the molecules taking into account the blue shift of the Soret band (414 nm for the monomer and 401 nm for the aggregate). Upon interaction with DMPC vesicles, the competing hydrophobic interactions with the bilayer destabilize the aggregated species in favor of monomer incorporation. Fluorescence lifetimes also show that the long component assigned to the monomer contributes only 30% to the overall decay in solution (e.g. pH=7.0) whereas in DMPC vesicles this contribution increases up to 85% independent of the solution pH, which confirms a location of the probe in an environment "protected" from free water. The picture changes completely in the case of TSPP, an anionic porphyrin which does not incorporate in DMPC vesicles. Remarkably, at pH=2.5 all the experimental findings point to the self-assembling of the porphyrin units in J-aggregates induced at the surface of the DMPC vesicle. In fact, upon removal of the aqueous solvent, we could define by fluorescence lifetime imaging microscopy (FLIM) regions where the fluorescence lifetime is that characteristic of the J-aggregate ( 0.11 ns).