Synthesis of chitosan-lysozyme microspheres, physicochemical characterization, enzymatic and antimicrobial activity.

Chitosan microspheres (CMS) by the emulsion-chemical cross-linking method with and without lysozyme immobilization were synthesized and characterized. The technique conditions were adjusted, and spherical particles with approximate diameters of 3.74 ± 1.08 µm and 0. 29 ± 0.029 µm to CMS and chitosan-lysozyme microspheres (C-LMS), respectively, were obtained. The microspheres were characterized by scanning electron microscopy (FESEM), Spectroscopy Fourier Transform Spectroscopy (ATR-FTIR), X-ray diffraction (XRD), and zeta potential. Particle size was identified by laser light scattering (DLS) and the thermal properties by Differential Scanning Calorimetry (DSC) and Thermogravimetry (TGA) were determined. By the lysis of Micrococcus lysodeikticus, the activity of the microspheres was determined, and the results correlated with the amount of lysozyme used in the immobilization process and the enzyme loading efficiency was 67%. Finally, release tests pointed out the amount of enzyme immobilized on the microsphere surface. These results showed that chitosan microspheres could be used as material for lysozyme immobilization by cross-linking technique. The antimicrobial activity was tested by inhibition percent determination, and it evidenced both chitosan microspheres (CMS) and chitosan-lysozyme microspheres (C-LMS) positive antimicrobial activity to Staphylococcus aureus, Enterococcus faecalis and Pseudomonas aeruginosa.

Bromelain immobilization in cellulose triacetate nanofiber membranes from sugarcane bagasse by electrospinning technique.

Cellulose triacetate (CTAB) synthesized by cellulose extracted from sugarcane bagasse, and commercial cellulose acetate (CA) were used to produce nanofiber membranes contained bromelain by electrospinning technique. About 1.3 g of cellulose acetate per gram of bagasse were obtained, and both CTAB and CA was characterized by analysis of Fourier Transform Infrared Spectroscopy (FTIR) and Differential Scanning Calorimetry (DSC). The nanofiber membranes were produced by electrospinning process testing the following conditions: voltage 25 kV, flow rate 4 mL/h and distance 10 cm, using acetone/ dimethylformamide (DMF) (85:15 m/ m) to 15% cellulose triacetate (70% CA + 30% CTAB) or CA solutions. Scanning Electron Microscopy (SEM) was used to nanofiber membranes characterization. Bromelain was immobilized on the nanofiber membranes by crosslinking with glutaraldehyde and directly in the electrospinning step, the highest activity recovery was about 675% and in vitro controlled release tests were performed to semi-quantitatively evaluate the release of the enzyme bromelain thus demonstrating complete release process in 3 days.

Integrated processes for use of pulps and lignins obtained from sugarcane bagasse and straw: a review of recent efforts in Brazil.

Sugarcane bagasse and straw can be converted into pulps, oils, controlled-release formulations, chelating agents, and composites. This article reviews bagasse and straw conversion efforts in Brazil. Laboratory-scale processes were developed aiming at the integral use of these biomass byprod ucts. Organosolv pulping and oxidation of lignin are the most promising processes for the rational use of sugarcane residues. Fungal pretreatment and spectroscopic characterization are also discussed.

Ceriporiopsis subvermispora used in delignification of sugarcane bagasse prior to soda/anthraquinone pulping.

Sugarcane bagasse was pretreated with the white-rot fungus Ceriporiopsis subvermispora for 30 d of incubation. The solid-state fermentation of 800 g of bagasse was carried out in 20-L bioreactors with an inoculum charge of 250 mg of fungal mycelium/kg of bagasse. The oxidative enzymes manganese peroxidase (MnP), lignin peroxidase (LiP), and laccase (Lac) and the hydrolytic enzyme xylanase (Xyl) were measured by standard methods and related to the fungus's potential for delignification. Among the lignocellulolytic assayed enzymes, Xyl was detected in larger quantity (4478 IU/kg), followed by MnP (236 IU/kg). LiP and Lac were not detected. The results of chemical analysis and mass component loss showed that C. subvermispora was selective to lignin degradation. Pretreated sugarcane bagasse and control pulps were obtained by soda/anthraquinone (AQ) pulping. Pulp yields, kappa number, and viscosity of all pulps were determined by chemical analysis of the samples. Yields of soda/AQ ranged from 46 to 54%, kappa numbers were 15-25, and the viscosity ranged from 3.6 to 7 cP for pulps obtained from pretreated sugarcane bagasse.

Action of white-rot fungus Panus tigrinus on sugarcane bagasse: evaluation of selectivity.

Biological pretreatments with three selected strains of Panus tigrinus were used for delignification of sugarcane bagasse. The fungi with potential for delignification were analyzed by determining the chemical composition of the decayed bagasse samples, and the selectivity in terms of weight loss of the different components was evaluated. All the strains grow abundantly on bagasse as unique carbon source. After determining the chemical composition of degraded bagasse, P. tigrinus FTPT-4745 was selected as the most efficient strain on a 6-g scale, since the carbohydrates were preserved. P. tigrinus FTPT-4741 and FTPT-4742 were the most efficient strains on a large scale (100 g).

Panus tigrinus strains used in delignification of sugarcane bagasse prior to kraft pulping.

Three strains of the white-rot fungus Panus tigrinus (FTPT-4741, FTPT-4742, and FTPT-4745) were cultivated on sugarcane bagasse prior to kraft pulping. Pulp yields, kappa number, and viscosity of all pulps were determined and Fourier transform infrared (FTIR) spectra from the samples were recorded. The growth of P. tigrinus strains in plastic bags increased the manganese peroxide and xylanase activities. Lignin peroxidase was not detected in the three systems (shaken and nonshaken flasks and plastic bags). FTIR spectra were reduced to their principal components, and a clear separation between FTPT-4742 and the control was observed. Strain FTPT-4745 decayed lignin more selectively in the three systems utilized. Yields of kraft pulping were low, ranging from 20 to 45% for the plastic bag samples and from 12 to 38% for the flask samples. Kappa numbers were 1-18 and viscosity ranged from 2.3 to 6.8 cP.