ABSTRACT
This publisher's note contains corrections to Opt. Lett.45, 3557 (2020).OPLEDP0146-959210.1364/OL.396342.
ABSTRACT
We report a novel, to the best of our knowledge, all-optical discrete multilevel time-lens (DM-TL) design based on cross-phase modulation (XPM). In this approach, the pump is synthesized such as the quadratic phase modulation is applied to the probe in constant-level time-bins with a maximum phase excursion of 2π. As a result, a considerable reduction in the required pump power is achieved in comparison to the conventional approach based on a parabolic pump. To illustrate the concept, the proposed DM-TL is here applied to the energy-preserving conversion of a continuous-wave (CW) signal into a train of pulses according to the theory of temporal Talbot array illuminators. We demonstrate CW-to-pulse conversion gains up to 12 at repetition rates exceeding 16 GHz, with a power saving with respect to the conventional parabolic TL that is more significant for increasing conversion gains.
ABSTRACT
In this work we report a novel intensity-based technique for simultaneous high-speed and high-resolution interrogation of fiber Bragg grating (FBG) sensors. The method uses a couple of intensity Gaussian filters and the dispersion-induced wavelength-to-time mapping effect. The Bragg wavelength is retrieved by means of the amplitude comparison between the two filtered grating spectrums, which are mapped into a time-domain waveform. In this way, measurement distortions arising from residual power due to the grating sidelobes are completely avoided, and the wavelength measurement range is considerably extended with respect to the previously proposed schemes. We present the mathematical background for the interrogation of FBGs with an arbitrary bandwidth. In our proof-of-concept experiments, we achieved sensitivities of â¼20 pm with ultra-fast rates up to 264 MHz.
ABSTRACT
Lately, the integration of two-dimensional materials into semiconductor devices has allowed the modification of their effective index by simply applying a modest voltage (between 0 and 3 volts). In this work, we present a device composed of two evanescently coupled silicon microring resonators where both rings have a graphene layer on top. This design is aimed to produce frequency combs with transmission characteristics controlled upon voltage application to the graphene layer. We numerically analyze the device response as a function of the incident wavelength and applied voltage. The results showed a low input intensity (0.6 GW/cm2) needed and a rapid response time (0.1 µs), in comparison to devices controlled by heat injection.
ABSTRACT
We present what we believe is a new method to introduce self-imaging properties under dispersive transmission of single or multiple light pulses with different temporal characteristics. By properly performing a temporal filtering into a given input signal it can produce an output signal having a spectral content satisfying the Montgomery condition, thereby allowing self-imaging of this signal under further dispersive transmission. An array of fiber loops performs the filtering operation on the input signal. We show some numerical simulations with a single light pulse as an input signal to verify the feasibility of the method and demonstrate the effects of the several involved parameters on both the pulse shape and the noise level.
