Starch/carbon nanofibers bionanocomposites via melt mixing: Effect of dispersion and compatibility on conductivity and mechanical properties.

Biodegradable polymers with conductivity and mechanical properties are required in several applications where it is necessary to substitute conductive synthetic plastics due to the high waste produced. In this study, bionanocomposites (BNCs) have been compounded by thermoplastification of rice starch via melt mixing with carbon nanofibers (NPs) and modified NPs (NPs [M]) using plasma of acrylic acid. Spectroscopy analysis, X-ray diffraction, and morphology were studied to elucidate the effect of dispersion and compatibility on the conductivity and mechanical properties. The incorporation of NPs promoted esterification reactions with starch during the melt mixing process, giving rise to changes in its crystal structure. NPs [M] showed better dispersion and compatibility because the plasma prevents reagglomeration and generates a stronger affinity. BNCs showed significative flexibility with remarked % elongation at break from 5.64 % to 248.60 %, and thermal conductivity increased from 0.10 to 0.58 W/m K, with NPs [M] at 5 %. In contrast, the electrical conductivity remained in the same magnitude order (10-4 S/cm). The better compatibility between starch-NPs [M] hinders electronic transport but increases the propagation of phonons to promote thermal conductivity. BNCs fabricated in this study by a dry and scalable process could be of interest in some application areas (intelligent food packing, electronics, textiles, etc.).

PLA/modified-starch blends and their application for the fabrication of non-woven fabrics by melt-blowing.

Blends of polylactic acid (PLA) and thermoplastic starch (TS) with and without chemical modification were obtained by melt extrusion and used to obtain non-woven fabrics by melt-blowing for the first time. Different TS were obtained by reactive extrusion from native cassava, oxidized, maleated, and dual modified (oxidized and maleated) starch. The chemical modification of starch decreases the difference in viscosity and favors blending, resulting in more homogeneous morphologies, unlike the blends with unmodified TS, which displayed a visible phase separation with large TS droplets. The dual modified starch showed a synergistic effect to process TS by melt-blowing. Regarding non-woven fabrics, values in diameter (2.5-82.1 µm), thickness (0.4-0.6 mm), and grammage (49.9-103.8 g/m2) were explained due to differences in viscosity of the components, and to the fact that during melt the hot air preferentially stretches and thins the areas without large droplets of TS. Moreover, plasticized starch acts as a flow modifier. The porosity of the fibers increased with the addition of TS. Further studies and optimization of blends with low contents of TS and type starch modification will be necessary to completely understand these systems with very complex behavior to obtain non-woven fabrics with improved properties and application.