Hemispheric asymmetry in ocean change and the productivity of ecosystem sentinels.

Climate change and other human activities are causing profound effects on marine ecosystem productivity. We show that the breeding success of seabirds is tracking hemispheric differences in ocean warming and human impacts, with the strongest effects on fish-eating, surface-foraging species in the north. Hemispheric asymmetry suggests the need for ocean management at hemispheric scales. For the north, tactical, climate-based recovery plans for forage fish resources are needed to recover seabird breeding productivity. In the south, lower-magnitude change in seabird productivity presents opportunities for strategic management approaches such as large marine protected areas to sustain food webs and maintain predator productivity. Global monitoring of seabird productivity enables the detection of ecosystem change in remote regions and contributes to our understanding of marine climate impacts on ecosystems.

Temporal change to self-rated health in the Swiss population from 1997 to 2012: the roles of age, gender, and education.

OBJECTIVES: Our study aimed to describe the temporal changes in self-rated health status (SRH) from 1997 to 2012 in adults aged 25 to 84 residing in Switzerland, with a view to identifying groups at risk for declining health. STUDY DESIGN: Secondary analysis of population-based cross-sectional health surveys. METHODS: Data were collected from the cross-sectional, population-based, five-year Swiss Health Survey, from 1997, 2002, 2007 and 2012. A total of 63,861 individuals' data were included. Multilevel mixed-effect logistic regression analysis was employed to estimate the probability of very good and good health within the framework of a hierarchical cross-classified age-period-cohort model (HAPC), adjusting for education level, gender, civil status, smoking status and body mass index. RESULTS: Individuals with higher education were substantially more likely than those with primary education to report good SRH (OR = 2.12; 95% CI = 1.93-2.33 for secondary education and OR = 3.79; 95% CI = 3.39-4.23 for tertiary education). The education effect depended on birth cohort and age: higher proportions of good SRH were reported by secondary (8%-17%) and tertiary (10%-22%) compared with primary educated individuals from the 1940 birth cohort onward; the proportion of secondary/tertiary (compared to primary) educated people reporting good SRH increased with age (by 10/11% at 45-50 years and 25/36% at 80-84 years). Gender health equality was achieved by the 1955 (primary educated) and 1960 (secondary educated) birth cohorts, while these women overtook men in reporting good SRH from the 1975 birth cohort onward. Tertiary educated younger women were significantly less likely to report good SRH than men but parity was achieved at around pension age. Similarly, gender inequality in those with primary and secondary education reduced in the younger ages to not be significant at around age 55, with women overtaking men from age 65. CONCLUSIONS: Younger birth cohorts with lower education levels appear most vulnerable in terms of their SRH. The education effect cumulatively increases when attaining incrementally higher education levels. While women report lower health than men, gender inequality in SRH has declined and even reversed over time and is substantially linked to differences in educational status. Swiss public health strategies should particularly target the younger adults with only primary school education of both genders; for women, to combat health burdens in their early life, and men, to mitigate issues in their later life.

Age- and Level-Dependence of Fatty Infiltration in Lumbar Paravertebral Muscles of Healthy Volunteers.

BACKGROUND AND PURPOSE: Normative age-related decline in paravertebral muscle quality is important for reference to disease and risk identification in patients. We aimed to establish age- and vertebral level-dependence of paravertebral (multifidus and erector spinae) muscle volume and fat content in healthy adult volunteers. MATERIALS AND METHODS: In this prospective study multifidus and erector spinae fat signal fraction and volume at lumbar levels L1-L5 were measured in 80 healthy volunteers (10 women and men per decade, 20-62 years of age) by 2-point Dixon 3T MR imaging. ANOVA with post hoc Bonferroni correction compared fat signal fraction and volume among subgroups. Pearson and Spearman analysis were used for correlations (P < .05). RESULTS: Fat signal fraction was higher in women (17.8% ± 10.7%) than men (14.7% ± 7.8%; P < .001) and increased with age. Multifidus and erector spinae volume was lower in women (565.4 ± 83.8 cm(3)) than in men (811.6 ± 98.9 cm(3); P < .001) and was age-independent. No differences in fat signal fraction were shown between the right and left paravertebral muscles or among the L1, L2, and L3 lumbar levels. The fat signal fraction was highest at L5 (women, 31.9% ± 9.3%; men, 25.7% ± 8.0%; P < .001). The fat signal fraction at L4 correlated best with total lumbar fat signal fraction (women, r = 0.95; men, r = 0.92, P < .001). Total fat signal fraction was higher in the multifidus compared with erector spinae muscles at L1-L4 for both sexes (P < .001). CONCLUSIONS: Lumbar paravertebral muscle fat content increases with aging, independent of volume, in healthy volunteers 20-62 years of age. Women, low lumbar levels, and the multifidus muscle are most affected. Further study examining younger and older subjects and the functional impact of fatty infiltrated paravertebral muscles are warranted.

Morbidity and mortality in adult spinal deformity surgery: Norwich Spinal Unit experience.

PURPOSE: This study analyses the complications of spinal deformity surgery in adults to highlight pre-disposing factors. METHODS: The clinical records and imaging were reviewed for 48 consecutive patients, 12 males and 36 females, with a mean age of 64 (31-86), who had surgery for spinal deformity. Mean follow-up time was 36 months (24-60). Patient data recorded were age, diagnosis and co-morbidities; deformity assessment: curve type, sagittal and coronal balance, Cobb angle. Operation details: number of instrumented levels, duration and intra-operative complications. OUTCOME: complications, re-operations, balance and Cobb angle. RESULTS: 28 patients (58 %) had at least 1, 15 patients (27 %) had 2 and 5 patients (9.5 %) had more than 2 co-morbidities. Average time between 1st presentation and operation was 13 months (1-41). The mean number of levels fused was 10.8 (4-23). In addition to posterior pedicle screw instrumentation, 40 patients had chevron osteotomies and 8 had pedicle substraction osteotomies. Posterior interbody fusions were performed at one level in 17 of which 7 had 2 level fusion. Two patients had combined anterior and posterior approaches. Fusion to the pelvis was performed in 19 patients. There were a total of 27 major and minor complications in 19/48 (39.5 %) patients. Late complications included 5 patients who had revisions for proximal junctional kyphosis, 1 patient had revision for pseudoarthrosis and 4 patients had removal of mal-positioned screws. CONCLUSIONS: Factors associated with high complication rate in adult spinal deformity surgery are age, co-morbidities and severe sagittal imbalance at the time of presentation.

Bacterial attachment on sub-nanometrically smooth titanium substrata.

Despite the volume of work that has been conducted on the topic, the role of surface topography in mediating bacterial cell adhesion is not well understood. The primary reason for this lack of understanding is the relatively limited extent of topographical characterisation employed in many studies. In the present study, the topographies of three sub-nanometrically smooth titanium (Ti) surfaces were comprehensively characterised, using nine individual parameters that together describe the height, shape and distribution of their surface features. This topographical analysis was then correlated with the adhesion behaviour of the pathogenic bacteria Staphylococcus aureus and Pseudomonas aeruginosa, in an effort to understand the role played by each aspect of surface architecture in influencing bacterial attachment. While P. aeruginosa was largely unable to adhere to any of the three sub-nanometrically smooth Ti surfaces, the extent of S. aureus cell attachment was found to be greater on surfaces with higher average, RMS and maximum roughness and higher surface areas. The cells also attached in greater numbers to surfaces that had shorter autocorrelation lengths and skewness values that approached zero, indicating a preference for less ordered surfaces with peak heights and valley depths evenly distributed around the mean plane. Across the sub-nanometrically smooth range of surfaces tested, it was shown that S. aureus more easily attached to surfaces with larger features that were evenly distributed between peaks and valleys, with higher levels of randomness. This study demonstrated that the traditionally employed amplitudinal roughness parameters are not the only determinants of bacterial adhesion, and that spatial parameters can also be used to predict the extent of attachment.

Air-directed attachment of coccoid bacteria to the surface of superhydrophobic lotus-like titanium.

Superhydrophobic titanium surfaces fabricated by femtosecond laser ablation to mimic the structure of lotus leaves were assessed for their ability to retain coccoid bacteria. Staphylococcus aureus CIP 65.8T, S. aureus ATCC 25923, S. epidermidis ATCC 14990T and Planococcus maritimus KMM 3738 were retained by the surface, to varying degrees. However, each strain was found to preferentially attach to the crevices located between the microscale surface features. The upper regions of the microscale features remained essentially cell-free. It was hypothesised that air entrapped by the topographical features inhibited contact between the cells and the titanium substratum. Synchrotron SAXS revealed that even after immersion for 50 min, nano-sized air bubbles covered 45% of the titanium surface. After 1 h the number of cells of S. aureus CIP 65.8T attached to the lotus-like titanium increased to 1.27×10(5) mm(-2), coinciding with the replacement of trapped air by the incubation medium.

Effects of dietary supplementation with an organic source of selenium on characteristics of semen quality and in vitro fertility in boars.

Semen characteristics in boars fed organic or inorganic sources of Se were assessed in 3 experiments. Crossbred boars were randomly assigned at weaning to 1 of 3 dietary treatments: I) basal diets with no supplemental Se (control), II) basal diets with 0.3 mg/kg of supplemental Se from an organic source (Sel-Plex, Alltech Inc., Nicholasville, KY), and III) basal diets supplemented with 0.3 mg/kg of supplemental Se from sodium selenite (Premium Selenium 270, North American Nutrition Co. Inc., Lewisburg, OH). For Exp. 1, semen was collected from boars (n = 10/dietary treatment) on 5 consecutive days at 15 mo of age. Effects of treatment × day were detected for the proportions of progressively motile (P = 0.02) and rapidly moving (P = 0.03) spermatozoa, and measures of sperm velocity, including path velocity of the smoothed cell path (P = 0.05) and average velocity measured in a straight line from the beginning to the end of the track (P = 0.05). Negative effects of day of semen collection on sperm motility were least pronounced in boars fed Sel-Plex. Experiment 2 was conducted when boars were 17 mo of age, and semen was collected (n = 10 boars/dietary treatment), diluted in commercially available extenders, and stored at 18°C for 9 d. Effects of treatment × day were detected for percentages of motile (P = 0.01) and static (P = 0.01) spermatozoa, amplitude of lateral head displacement (P = 0.02), frequency with which the sperm track crossed the sperm path (P = 0.04), straightness (P = 0.01), and average size of all sperm heads (P = 0.03). In general, sperm cells from boars fed Sel-Plex were better able to maintain motility during liquid storage compared with boars fed sodium selenite. For Exp. 3, semen was collected from boars (n = 6/dietary treatment) at 23 mo of age, and spermatozoa were evaluated at d 1 and 8 after semen collection using in vitro fertilization procedures. There was a tendency for an effect (P = 0.11) of dietary treatment on fertilization rate with Sel-Plex-fed boars having the greatest value (70.7%). The results of this study suggest that there are positive effects of dietary supplementation with Sel-Plex on boar semen characteristics and that organic Se supplementation may help ameliorate the negative effects of semen storage on characteristics of sperm motility.

Integrating bermudagrass into tall fescue-based pasture systems for stocker cattle.

The daily BW gain of stocker steers grazing tall fescue [Lolium arundinaceum (Schreb.) S.J. Darbysh. = Schedonorus arundinaceus (Schreb.) Dumort.]-based pastures typically declines during summer. To avoid these declines, in part to mitigate the effects of tall fescue toxicosis, it is commonly advised to move cattle to warm-season forage during this period. A 3-yr (2006, 2007, and 2008) grazing study was conducted to evaluate the effect of replacing 25% of the area of a tall fescue/clover (81% endophyte-infected) pasture system with "Ozark" bermudagrass [Cynodon dactylon (L.) Pers.] overseeded with clover (Trifolium spp.) to provide summer grazing for stocker steers (TF+BERM). The TF+BERM treatment was compared with a grazing system in which tall fescue/clover (TF) pastures were the only type of forage available for grazing. Our objective was to determine if replacement of 25% of the land area in a fescue system with bermudagrass would increase annual beef production compared with a system based solely on tall fescue. The study was conducted at the Southwest Research and Education Center of the University of Missouri near Mt. Vernon. Each treatment was rotationally stocked with 5 steers (248 ± 19.3 kg) on 1.7 ha. Fertilizer applications were applied at rates recommended for each respective forage species. Total forage production, BW gain per hectare, and season-long ADG of steers was greater (P < 0.06) for TF+BERM than for TF in 2006, but none of these measures differed (P > 0.19) in 2007 or 2008. In vitro true digestibility of pastures was greater (P = 0.01) for TF (84.4%, SEM = 0.64%) compared with TF+BERM (80.6%, SEM = 0.79%), even in summer. The decreased in vitro true digestibility of the bermudagrass pastures likely negated any benefit that animals in TF+BERM had in avoiding the ergot-like alkaloids associated with endophyte-infected tall fescue. Renovating 25% of the pasture system to bermudagrass provided some benefit to the system in years when summertime precipitation was limited (2006) but provided no value in wetter years (2007 and 2008). Although renovating endophyte-infected tall fescue pastures to a warm-season forage is a widely used practice to mitigate tall fescue toxicosis, the benefits of this practice are limited if forage quality of the warm season component is poor.

Nature inspired structured surfaces for biomedical applications.

Nature has created an array of superhydrophobic surfaces that possess water-repellent, self-cleaning and anti-icing properties. These surfaces have a number of potential applications in the biomedical industry, as they have the potential to control protein adsorption and cell adhesion. Natural superhydrophobic surfaces are typically composed of materials with a low intrinsic surface free-energy (e.g the cuticular waxes of lotus leaves and insect wings) with a hierarchical structural configuration. This hierarchical surface topography acts to decrease the contact area of water droplets in contact with the surface, thereby increasing the extent of the air/water interface, resulting in water contact angles greater than 150º. In order to employ these surfaces in biotechnological applications, fabrication techniques must be developed so that these multi-scale surface roughness characteristics can be reproduced. Additionally, these fabrication techniques must also be able to be applied to the material required for the intended application. An overview of some of the superhydrophobic surfaces that exist in nature is presented, together with an explanation of the theories of their wettability. Also included is a description of some of the biomedical applications of superhydrophobic surfaces and fabrication techniques that can be used to mimic superhydrophobic surfaces found in nature.

Bacterial attachment on optical fibre surfaces.

Optical fibres have received considerable attention as high-density sensor arrays suitable for both in vitro and in vivo measurements of biomolecules and biological processes in living organisms and/or nano-environments. The fibre surface was chemically modified by exposure to a selective etchant that preferentially erodes the fibre cores relative to the surrounding cladding material, thus producing a regular pattern of cylindrical wells of approximately 2.5 mum in diameter and 2.5 mum deep. The surface hydrophobicity of the etched and non-etched optical fibres was analysed using the sessile pico-drop method. The surface topography was characterised by atomic force microscopy (AFM), while the surface chemistry was probed by time-of-flight secondary ion mass spectrometry (ToF-SIMS). Six taxonomically different bacterial strains showed a consistent preference for attachment to the nano-scale smoother (R(q) = 273 nm), non-etched fibre surfaces (water contact angle, theta = 106 degrees +/- 4 degrees). In comparison, the surfaces of the etched optical fibres (water contact angle, theta = 96 degrees +/- 10 degrees) were not found to be amenable to bacterial attachment. Bacterial attachment on the non-etched optical fibre substrata varied among different strains.

Marine no-take zone rapidly benefits endangered penguin.

No-take zones may protect populations of targeted marine species and restore the integrity of marine ecosystems, but it is unclear whether they benefit top predators that rely on mobile pelagic fishes. In South Africa, foraging effort of breeding African penguins decreased by 30 per cent within three months of closing a 20 km zone to the competing purse-seine fisheries around their largest colony. After the fishing ban, most of the penguins from this island had shifted their feeding effort inside the closed area. Birds breeding at another colony situated 50 km away, whose fishing grounds remained open to fishing, increased their foraging effort during the same period. This demonstrates the immediate benefit of a relatively small no-take zone for a marine top predator relying on pelagic prey. Selecting such small protected areas may be an important first conservation step, minimizing stakeholder conflicts and easing compliance, while ensuring benefit for the ecosystems within these habitats.

The effect of interspinous implant surgery on back surface shape and radiographic lumbar curvature.

BACKGROUND: Interspinous process implants, used to augment lumbar spine surgery, putatively induce a local segmental lumbar kyphosis yet few investigations outline the effect in vivo on thoracolumbar sagittal curvature. Changes in lumbar skeletal alignment and posture have traditionally relied upon radiographic and back surface spinal curvature measurements, respectively. METHODS: Lumbar lordosis curvature in 10 healthy subjects (6F, 4M; mean age 36 years) and 10 interspinous implant lumbar surgery patients (5F, 5M; mean age 51 years) was assessed with rasterstereography at baseline and at 6 weeks. Skeletal lumbar lordosis in standing was measured from lateral erect radiography pre- and 6 weeks post-operatively in the surgical cohort, and compared to angulation obtained for surface lordosis curvature derived from rasterstereography. FINDINGS: Repeatable measurement of standing lumbar lordosis from rasterstereographic back shape imaging in healthy volunteers and lumbar surgery cases was demonstrated. Reductions of 0.6 (NS) in healthy and 3.1 (significant, P<0.001) in surgical subjects were recorded for surface lumbar lordosis angle between the 6 week time-points. Slight flattening of the segmental angle and regional lordosis after DIAM surgery was revealed by radiography. Skeletal and surface lumbar lordosis changes were uncorrelated preoperatively (rho=0.28) and postoperatively (rho=0.26). INTERPRETATION: Rasterstereography is sensitive in assessing lumbar lordosis changes in healthy and lumbar surgical individuals over time. Surgery with DIAM for lumbar pathology may result in an initial mild flattening of lordosis. Serial investigations of spinal curvature after surgery with DIAM interspinous implant are warranted in order to better understand the time-course of spinal posture changes of such cases.

Single-level cervical radiculopathy: clinical outcome and cost-effectiveness of four techniques of anterior cervical discectomy and fusion and disc arthroplasty.

Although there are several accepted methods of surgical treatment for single-level cervical radiculopathy, the choice depend on the surgeon's preference. The techniques may vary in peri-operative morbidity, short- and long-term outcome, but no study so far has analyzed their cost-effectiveness. This study might give some insight in balancing cost and effectiveness and deciding the right technique. Sixty consecutive patients (15 each group), mean age 36 (range 24-76 years) with single-level cervical disc disease underwent surgical treatment with four different techniques in two centers over the period of 1999-2005. The four groups were--(1) plate and tricortical autograft, (2) plate, cage, and bone substitute, (3) cage only, and (4) disc arthroplasty. The data was collected prospectively according to our protocol and subsequently analyzed. The clinical outcome was assessed comparing visual analog scale (VAS) of neck pain and, short form 12 (SF12) questionnaire both pre- and postoperatively. The radiological assessment was done for fusion rate and postoperative related possible complications at 3 months, 6 months, 1 year, and final follow-up. The cost analysis was done calculating the operative time, hospital stay, implant cost together. The mean follow-up period was 31 months (range 28-43 months). The clinical outcome in terms of VAS of neck and arm pain and SF12 physical and mental score improvement (P=0.001) were comparable with all four techniques. The radiological fusion rate was comparable to current available data. As the hospital stay was longer (average 5 days) with plate and autograft group, the total cost was maximum (average 2,920 pound sterling) with this group. There was satisfactory clinical and radiological outcome with all four techniques. Using the cage alone was the most cost-effective technique, but the disc arthroplasty was comparable to the use of cage and plate. Anterior cervical discectomy and fusion is an established surgical treatment for cervical radiculopathy. Single-level cervical radiculopathy was treated with four different techniques. The clinical outcome and cost-effectiveness were compared in this study.

Differences in colonisation of five marine bacteria on two types of glass surfaces.

The retention patterns of five taxonomically different marine bacteria after attachment on two types of glass surfaces, as-received and chemically etched, have been investigated. Contact angle measurements, atomic force microscopy (AFM), scanning electron microscopy (SEM), confocal laser scanning microscopy (CLSM), X-ray fluorescence spectroscopy (XRF) and X-ray photoelectron spectrometry (XPS) were employed to investigate the impact of nanometer scale surface roughness on bacterial attachment. Chemical modification of glass surfaces resulted in a approximately 1 nm decrease in the average surface roughness (R(a)) and the root-mean-squared roughness (R(q)) and in a approximately 8 nm decrease in the surface height and the peak-to-peak (R(max)) and the 10-point average roughness (R(z)). The study revealed amplified bacterial attachment on the chemically etched, nano-smoother glass surfaces. This was a consistent response, notwithstanding the taxonomic affiliation of the selected bacteria. Enhanced bacterial attachment was accompanied by elevated levels of secreted extracellular polymeric substances (EPS). An expected correlation between cell surface wettability and the density of the bacterial attachment on both types of glass surfaces was also reported, while no correlation could be established between cell surface charge and the bacterial retention pattern.

Dietary supplementation with a source of omega-3 fatty acids increases sperm number and the duration of ejaculation in boars.

Development of nutritional strategies to increase the production of fertile sperm would further enhance the distribution of superior genetic material by AI. The objective was to determine the effects of a dietary source of omega-3 fatty acids in boars on semen characteristics and sexual behavior. Boars were fed daily 2.2 kg of a diet top-dressed with 0.3 kg of corn (controls; n=12) or 0.3 kg of a supplement containing 31% omega-3 fatty acids (n=12) for 16 weeks. Semen was collected weekly and for boars that received the supplement containing omega-3 fatty acids, total sperm per ejaculate averaged 84.3+/-2.3 x 10(9) (mean+/-S.E.M.) during Weeks 0-7, and increased (P=0.02) to 95.6+/-2.3 x 10(9) during Weeks 8-15. Control boars averaged 86.3+/-2.3 x 10(9) sperm per ejaculate during Weeks 0-7 and 86.4+/-2.3 x 10(9) during Weeks 8-15. Other semen characteristics were similar (P>0.1) between groups. Duration of ejaculation was affected by treatment (343.9s for controls and 388.8s for boars fed omega-3 fatty acids; S.E.M.=15.7; P=0.05). In summary, semen characteristics and sexual behavior were altered in boars fed a supplement containing omega-3 fatty acids. Boar semen is typically diluted to create AI doses containing 3 x 10(9) sperm each; therefore, use of the supplement increased the number of potential AI doses by approximately three per ejaculate after the initial 7 week supplementation period.

Growth rate and physiology of steers grazing tall fescue inoculated with novel endophytes.

Cattle grazing tall fescue (Festuca arundinacea Schreb.) often develop fescue toxicosis. This condition is thought to be caused by ergot alkaloids produced by the endophyte Neotyphodium coenophialum. Endophytes from wild tall fescue plants, which do not produce ergot alkaloids, were transferred into the endophyte-free tall fescue germplasm, HiMag. The novel associations also lacked the ability to produce ergot alkaloids. Our objective was to determine whether cattle grazing these novel endophyte associations showed signs of fescue toxicosis. At the Fayetteville, Arkansas location, tester steers (n = 72) were assigned to one of four pasture treatments: endophyte-free HiMag tall fescue (HiMag-); 'Kentucky-31' tall fescue infected with its native, toxic endophyte (KY+); and two novel endophyte-infected tall fescue associations, HiMag4 and HiMag9. At the Mount Vernon, Missouri location, steers (n = 54) were used to test three of the four cultivars (HiMag9 was not tested). Ergot alkaloid concentrations in the forage of HiMag4 and HiMag9 were low or undetectable. Respiration rate, rectal temperature, ADG, and hair scores were measured during the grazing period. Blood was collected via jugular venipuncture and used for prolactin, aspartate aminotransferase, alkaline phosphatase (ALP), lactate dehydrogenase (LDH), cholesterol, triglyceride, and creatinine analysis. Weight gains by steers grazing HiMag4 and HiMag9 did not differ from those of steers grazing HiMag-, but were greater than gains (P < 0.05) by steers on the KY+ treatment. Steers grazing KY+ had higher (P < 0.05) respiration rates, rectal temperatures, and hair scores than did steers grazing novel endophyte and HiMag- pastures. Prolactin, ALP, cholesterol, LDH, and triglycerides all were suppressed (P < 0.05) in steers grazing KY+ compared with steers grazing novel endophyte and HiMag- pastures. Steers grazing the novel endophyte tall fescues did not suffer from the decreased weight gains and toxicities associated with fescue toxicosis, resulting in enhanced animal production.

Rotational moulding.

Rotational moulding promises designers attractive economics and a low-pressure process. The benefits of rotational moulding are compared here with other manufacturing methods such as injection and blow moulding.

Surface ordering transitions at a liquid crystal-solid interface above the isotropic smectic-A transition.

The degree of orientational order induced by confining cylindrical surfaces is monitored via deuteron nuclear magnetic resonance linesplitting and linewidth above the smectic-A to isotropic phase transition. The orientational order strongly depends on the length of the surfactant coupling molecule, on the surface coverage, and on the liquid crystal. Continuous and stepwise growth of orientational order and surface-induced orientational order transitions found in the isotropic phase are explained in terms of a simplified model of surface-induced layering and molecular self-diffusion.

Effect of DNA concentration on transgenesis rates in mice and pigs.

A retrospective analysis of transgenesis rates obtained in seven pronuclear microinjection programs was undertaken to determine if a relationship existed between the amount of DNA injected and transgenesis rates in the pig. Logistic regression analysis showed that as the concentration of DNA injected increased from 1 to 10 ng/microl, the number of transgenics when expressed as a proportion of the number liveborn (integration rate) increased from 4% to an average of 26%. A similar relationship was found when the number of molecules of DNA injected per picolitre was analysed. No evidence was obtained to suggest either parameter influenced integration rate in mice when the same constructs were injected. The number of transgenics liveborn when expressed as a proportion of ova injected (efficiency rate), increased as DNA concentration increased up to 7.5 ng/microl and then decreased at 10 ng/microl for both species suggesting that at this concentration DNA (or possible contaminants) may have influenced embryo survival. The relationship between efficiency and the number of molecules injected per picolitre was complex suggesting that the concentration at which DNA was injected was a better determinant of integration and efficiency rates. In conclusion, the present study suggests that transgenes need to be injected at concentrations of between 5 and 10 ng/microl to maximise integration and efficiency rates in pigs.