A cross-platform metabolomics workflow for volume-restricted tissue samples: application to an animal model for polycystic kidney disease.

Metabolic profiling provides an unbiased view of the physiological status of an organism as a "function" of the metabolic composition of a measured sample. Here, we propose a simple LC-MS based workflow for metabolic profiling of volume-restricted samples, namely individual 20 µm-thick histological sections of a mouse kidney. The main idea of this workflow is to re-use the material after an RPLC-MS run, namely using the volume remaining in the vial after injection, and then introducing a phase changing step to enable HILIC-MS analysis. To test the applicability of the workflow and its ability to extract valuable biological information, we applied it to an animal model of polycystic kidney disease (PKD).

Determination and characterization of glycerophospholipids in olive fruit and oil by nonaqueous capillary electrophoresis with electrospray-mass spectrometric detection.

A nonaqueous capillary electrophoresis method with electrospray-mass spectrometric detection was developed to study the glycerophospholipid fraction in olive fruit and olive oil samples. In olive fruits, where the information available about the phospholipid fraction was very scarce, results obtained in this work allowed us to complete and improve this knowledge. The glycerophospholipid fraction of the olive fruit samples analyzed was composed of phosphatidylcholine (PC), phosphatidylethanolamine (PE), lysophosphatidylethanolamine (lyso-PE), phosphatidylinositol (PI), phosphatidic acid (PA), lysophosphatidic acid (lyso-PA), and phosphatidylglycerol (PG). Differences in the relative abundance of the glycerophospholipid classes determined were observed as a function of the botanical and geographical origin of the olive fruits analyzed. Interestingly, the olive stone and pulp analyzed also showed different glycerophospholipid compositions. For olive oil, five glycerophospholipids (lyso-PA, PC, PE, lyso-PE, and PG) were detected. Finally, identification of the main molecular species in the different glycerophospholipid classes for the olive fruit samples analyzed was accomplished by tandem mass spectrometric experiments and information from the literature.

Rapid separation of tetracycline derivatives and their main degradation products by capillary zone electrophoresis.

A mixture of five tetracycline (TC) derivatives: minocycline (MC), demeclocycline (DMCTC), doxycycline (DC), and sancycline (SC), as well as each TC derivative from its main degradation product were separated by capillary zone electrophoresis (CZE). The influence of the pH and the concentration and nature of the background electrolyte (BGE) on the separations was investigated. Ethylenediaminetetraacetic acid (EDTA; 1 mM) was used as additive in a 25 mM phosphate buffer (pH 2.3) because this BGE enabled the rapid separation of the TC derivatives and of each TC derivative from its respective degradation product in less than 6 min. After optimization of the separation conditions, the analytical characteristics of the method were investigated. The parameters involved were linearity, precision (repeatability and reproducibility), and limits of detection (LODs). LODs obtained for the five TC derivatives studied were about 3 microg/mL. Finally, the CZE method developed was applied to study the stability of TC derivatives and to analyze the TC derivative content in three different pharmaceutical preparations.

Application of capillary zone electrophoresis with off-line solid-phase extraction to in vitro metabolism studies of antifungals.

A simple and robust solid-phase extraction (SPE) procedure for the cleanup and sample preconcentration of antifungals (ketoconazole, clotrimazole, itraconazole, fluconazole, and voriconazole) and their metabolites after incubation with human liver microsomes, as well as a simplified capillary zone electrophoresis (CZE) method for their rapid analysis, have been developed to determine the stability of these compounds in in vitro samples. Three different sample pretreatment procedures using SPE with reversed-phase sorbents (100 mg C8, 100 mg C18, and 30 mg Oasis-HLB) were studied. The highest and most reproducible recoveries were obtained using a 30 mg Oasis-HLB sorbent and methanol containing 2% acetic acid as eluent. Enrichment by a factor of about four times was achieved by reconstituting the final SPE eluates to a small volume. For the CZE separation, good separations without interfering peaks due to the in vitro matrix were obtained with a simple running electrolyte using a fused-silica capillary. The best separation for all components originated by each tested drug after incubation with human liver microsomes (unmetabolized parent drug and its metabolites) was obtained using a 0.05 M phosphate running buffer (pH 2.2) without additives. The effect of the injection volume was also investigated in order to obtain the best sensitivity. Performance levels in terms of precision, linearity, limits of detection, and robustness were determined.

Optimization of the separation of a group of antifungals by capillary zone electrophoresis.

Two simple, rapid, and efficient methods for the analysis of seven antifungal compounds have been developed by capillary zone electrophoresis. Resolutions higher than 1.5 were obtained using 0.025 M phosphate buffer (pH 2.30) (analysis time close to 9 min) or 0.2 M formic acid (pH 2.15) (analysis time close to 6 min), with an applied voltage of 20 kV and a temperature of 30 degrees C. The highest sensitivity and selectivity can be obtained using phosphate buffer but the shortest analysis times are achieved in the formic system. The analytical characteristics of the optimized methods were investigated. The reproducibility obtained for migration times (RSD(n = 10) < or = 1.0%) and peak areas (RSD(n = 10) < or = 4.3%) was acceptable, but better reproducibilities were obtained when verapamil was used as internal standard (RSD(n = 10) < 0.4% for relative migration times and RSD(n = 10) < or = 2.2% for peak area ratios). The lowest limit of detection was obtained for clotrimazole (0.12 microg/ml) and the highest for fluconazole and voriconazole (0.90 microg/ml). The lowest and the highest limits of quantitation were, respectively, 0.40 microg/ml for clotrimazole and 3.00 microg/ml for fluconazole and voriconazole.

Rapid enantiomeric separation of polychlorinated biphenyls by electrokinetic chromatography using mixtures of neutral and charged cyclodextrin derivatives.

Electrokinetic chromatography with cyclodextrin derivatives (CD-EKC) was used to achieve the rapid enantiomeric separation of chiral polychlorinated biphenyls (PCBs). Thirteen of the 19 chiral PCBs stable at room temperature were individually separated into their two enantiomers by using 2-morpholinoethanesulfonic acid (MES) buffer (pH 6.5) containing carboxymethylated gamma-cyclodextrin (CM-gamma-CD) as pseudostationary phase mixed with beta-cyclodextrin (beta-CD) or permethylated beta-cyclodextrin (PM-beta-CD). Urea was also added to increase the solubility of PCBs and cyclodextrins in the aqueous separation buffer. Several experimental parameters such as the nature, concentration, and pH of the buffer, nature and concentration of the cyclodextrin derivatives used, and the addition of different additives were studied in order to improve the enantiomeric separation. In addition, the effect of some instrumental parameters such as separation temperature and applied voltage was also investigated. PCBs were enantiomerically separated in less than 12 min by using a 50 mM MES buffer (pH 6.5) containing 20 mM CM-gamma-CD, 10 mM beta-CD or 20 mM PM-beta-CD, and 2 M urea at a temperature of 45 degrees C and an applied voltage of 20 kV.

Combined use of supercritical fluid extraction, micellar electrokinetic chromatography, and reverse phase high performance liquid chromatography for the analysis of antioxidants from rosemary (Rosmarinus officinalis L.).

Antioxidants from rosemary were determined by the combined use of supercritical fluid extraction (SFE) prior to reverse-phase high-performance liquid chromatography (RP-HPLC) or micellar electrokinetic chromatography (MEKC). The separation of antioxidants found in the SFE fractions was achieved by using a new MEKC method and a published HPLC procedure, both with diode array detection. The characterization of the different antioxidants was further done by HPLC-mass spectrometry. Advantages and drawbacks of HPLC and MEKC for analyzing the antioxidants found in the different extracts are discussed. From the results it is concluded that HPLC renders higher peak area and is better in its reproducibility than MEKC; both techniques provide similar analysis time reproducibility. The main advantage of MEKC is its much higher separation speed, which is demonstrated to be useful for the quick adjustment of SFE conditions, allowing rosemary fractions of higher antioxidative power to be obtained quickly. Moreover, the possibilities of this approach for following the degradation of antioxidants are discussed.

Influence of mobile phase composition on electroosmotic flow velocity, solute retention and column efficiency in open-tubular reversed-phase capillary electrochromatography.

The effects of some experimental parameters, such as the volume fraction and type of organic modifier in the mobile phase, and the concentration, type and pH of the buffer on the electroosmotic flow velocity, the retention behavior of test solutes, and the column efficiency have been investigated in capillary electrochromatography (CEC) using an open-tubular column of 9.60 microm I.D. with a porous silica layer chemically modified with C18 as stationary phase. The retention of a group of polycyclic aromatic hydrocarbons (PAHs) used as a test mixture varied significantly by changing the organic modifier content in the hydroorganic mobile phase according to the reversed-phase-like selectivity of the stationary phase. In addition, an increase in the percentage of organic modifier resulted in a slight increase in the linear velocity of the EOF. On the other hand, when the phosphate buffer concentration was increased over the range 1-50 mM, the electroosmotic mobility fell dramatically, the retention of the solutes decreased steadily, and the plate height showed a significant increase. The results obtained with phosphate, trishydroxymethylaminomethane or 2-morpholinoethanesulfonic acid as buffers were similar when pH remained constant. Optimization in CEC was essential to achieve further enhancement of separation performance, because the analysis time and separation resolution are essentially affected when varying operating parameters. Separations of seven PAHs with more than 100000 plates are presented within 4 min analysis time.

Chiral separation of polychlorinated biphenyls by micellar electrokinetic chromatography with sodium cholate.

Micellar electrokinetic chromatography (MEKC) with one kind of bile salt (sodium cholate) was used to separate three chiral polychlorinated biphenyls (PCBs; 84, 95, and 176), each one in its two enantiomers. Sodium cholate was used as chiral surfactant in a 2-(N-cyclohexylamino) ethanesulfonic acid (CHES) buffer under alkaline (pH 10) conditions containing urea (2 M). The influence of bile salt concentration on the efficiency and the resolution between the two enantiomers of PCBs 84 and 95 was established. The chiral separation of three PCBs was successfully achieved in less than 30 min (approximately 23 min for PCB 176 and approximately 29 min for PCBs 84 and 95).