Toxicological Profile of PM from Different Sources in the Bronchial Epithelial Cell Line BEAS-2B.

The toxicity of particulate matter (PM) is strictly associated with its physical-chemical characteristics, such as size or chemical composition. While these properties depend on the origin of the particles, the study of the toxicological profile of PM from single sources has rarely been highlighted. Hence, the focus of this research was to investigate the biological effects of PM from five relevant sources of atmospheric PM: diesel exhaust particles, coke dust, pellet ashes, incinerator ashes, and brake dust. Cytotoxicity, genotoxicity, oxidative, and inflammatory response were assessed in a bronchial cell line (BEAS-2B). BEAS-2B cells were exposed to different concentrations (25, 50, 100, and 150 µg/mL medium) of particles suspended in water. The exposure lasted 24 h for all the assays performed, except for reactive oxygen species, which were evaluated after 30 min, 1 h, and 4 h of treatment. The results showed a different action of the five types of PM. All the tested samples showed a genotoxic action on BEAS-2B, even in the absence of oxidative stress induction. Pellet ashes seemed to be the only ones able to induce oxidative stress by boosting the formation of reactive oxygen species, while brake dust resulted in the most cytotoxic. In conclusion, the study elucidated the differential response of bronchial cells to PM samples generated by different sources. The comparison could be a starting point for a regulatory intervention since it highlighted the toxic potential of each type of PM tested.

Refractive Index of Supercooled Water Down to 230.3 K in the Wavelength Range between 534 and 675 nm.

Knowledge of the refractive index of water in the deeply supercooled metastable liquid state is important, for example, for an accurate description of optical reflection and refraction processes occurring in clouds. However, a measurement of both the temperature and wavelength dependence of the refractive index under such extreme conditions is challenging. Here, we employ Raman spectroscopy in combination with microscopic water jets in vacuum to obtain the refractive index of supercooled water to a lowest temperature of 230.3 K. While our approach is based on the analysis of Mie resonances in Raman spectra measured by using a single excitation wavelength at 532 nm, it allows us to obtain the refractive index in a wide visible wavelength range from 534 to 675 nm. Because of a direct link between the refractive index and density of water, our results provide a promising approach to help improve our understanding of water's anomalous behavior.

Self-Healing and Light-Soaking in MAPbI3 : The Effect of H2 O.

The future of halide perovskites (HaPs) is beclouded by limited understanding of their long-term stability. While HaPs can be altered by radiation that induces multiple processes, they can also return to their original state by "self-healing." Here two-photon (2P) absorption is used to effect light-induced modifications within MAPbI3 single crystals. Then the changes in the photodamaged region are followed by measuring the photoluminescence, from 2P absorption with 2.5 orders of magnitude lower intensity than that used for photodamaging the MAPbI3 . After photodamage, two brightening and one darkening process are found, all of which recover but on different timescales. The first two are attributed to trap-filling (the fastest) and to proton-amine-related chemistry (the slowest), while photodamage is attributed to the lead-iodide sublattice. Surprisingly, while after 2P-irradiation of crystals that are stored in dry, inert ambient, photobrightening (or "light-soaking") occurs, mostly photodarkening is seen after photodamage in humid ambient, showing an important connection between the self-healing of a HaP and the presence of H2 O, for long-term steady-state illumination, practically no difference remains between samples kept in dry or humid environments. This result suggests that photobrightening requires a chemical-reservoir that is sensitive to the presence of H2 O, or possibly other proton-related, particularly amine, chemistry.

Near field scattering for samples under forced flow.

We describe a light scattering technique for characterizing colloidal samples under constant flow. It exploits the properties of speckles in the deep Fresnel region-the so-called near field speckles-providing absolute scattering measurements of the static form factor of the sample, as described extensively by Mazzoni et al. [Rev. Sci. Instrum. 84, 043704 (2013)] for static samples. We exploit a strongly astigmatic beam for illuminating the scattering volume with a light sheet a few microns thick. This largely improves the sensitivity of the method to small signals. Moreover, by flowing the sample in the direction perpendicular to the light sheet, the transit times are reduced to a minimum, allowing for fast measurements. We tested the instrument with suspensions of calibrated colloidal polystyrene spheres with a size comparable to the light wavelength. In particular, we recovered the static form factors of suspensions of spherical particles and the phase lag of the zero-angle scattering amplitude, which both compare well to Mie theory predictions. We then applied the method to colloidal fractal aggregates of sub-wavelength particles and measured their fractal dimension. The instrument is designed to be operational in continuous flow analysis systems.

Self-Healing Inside APbBr3 Halide Perovskite Crystals.

Self-healing, where a modification in some parameter is reversed with time without any external intervention, is one of the particularly interesting properties of halide perovskites. While there are a number of studies showing such self-healing in perovskites, they all are carried out on thin films, where the interface between the perovskite and another phase (including the ambient) is often a dominating and interfering factor in the process. Here, self-healing in perovskite (methylammonium, formamidinium, and cesium lead bromide (MAPbBr3 , FAPbBr3 , and CsPbBr3 )) single crystals is reported, using two-photon microscopy to create damage (photobleaching) ≈110 µm inside the crystals and to monitor the recovery of photoluminescence after the damage. Self-healing occurs in all three perovskites with FAPbBr3 the fastest (≈1 h) and CsPbBr3 the slowest (tens of hours) to recover. This behavior, different from surface-dominated stability trends, is typical of the bulk and is strongly dependent on the localization of degradation products not far from the site of the damage. The mechanism of self-healing is discussed with the possible participation of polybromide species. It provides a closed chemical cycle and does not necessarily involve defect or ion migration phenomena that are often proposed to explain reversible phenomena in halide perovskites.

Hyperspectral imaging with deformable gratings fabricated with metal-elastomer nanocomposites.

We report the fabrication and characterization of a simple and compact hyperspectral imaging setup based on a stretchable diffraction grating made with a metal-polymer nanocomposite. The nanocomposite is produced by implanting Ag clusters in a poly(dimethylsiloxane) film by supersonic cluster beam implantation. The deformable grating has curved grooves and is imposed on a concave cylindrical surface, thus obtaining optical power in two orthogonal directions. Both diffractive and optical powers are obtained by reflection, thus realizing a diffractive-catoptric optical device. This makes it easier to minimize aberrations. We prove that, despite the extended spectral range and the simplified optical scheme, it is actually possible to work with a traditional CCD sensor and achieve a good spectral and spatial resolution.