Exploring photosensitization as an efficient antifungal method.

Lipid bilayers containing ergosterol show signs of destruction when they are treated with singlet oxygen, due to the conversion of ergosterol into its peroxy derivative. Applying this previous knowledge, an antifungal method was explored using Candida tropicalis as model, and membrane permeation under photosensitization conditions became evident. These data were complemented through AFM images of artificial lipid bilayers, using cholesterol or ergosterol as structural sterols, showing their corresponding morphologies at the nanoscale. Based on these results, an antifungal method was developed, which shows evidence of the extent of membrane permeation during photosensitization. Such photosensitization offers an effective alternative treatment, especially in membranes with a high ergosterol content, suggesting that this procedure constitutes an easy and efficient antifungal method.

Highly Stabilized Nanoparticles on Poly-l-Lysine-Coated Oxidized Metals: A Versatile Platform with Enhanced Antimicrobial Activity.

The increasing incidence of infections in implantable devices has encouraged the search for biocompatible antimicrobial surfaces. To inhibit the bacterial adhesion and proliferation on biomaterials, several surface functionalization strategies have been developed. However, most of these strategies lead to bacteriostatic effect and only few of these are able to reach the bactericidal condition. In this work, bactericidal surfaces were designed through the functionalization of titanium surfaces with poly-l-lysine (PLL) as the mediator for the incorporation of antimicrobial silver nanoparticles (AgNPs). This functionalization influences the adsorption of the particles on the substrate impeding the agglomeration observed when bare titanium surfaces are used, leading to a homogeneous distribution of AgNPs on the surfaces. The antimicrobial activity of this surface has been tested against two different strains, namely, Staphylococcus aureus and Pseudomonas aeruginosa. For both strains and different AgNPs sizes, the surface modified with PLL and AgNPs shows a much enhanced antimicrobial activity in comparison with AgNPs deposited on bare titanium. This enhanced antibacterial activity is high enough to reach bactericidal effect, a condition hard to achieve in antimicrobial surfaces. Importantly, the designed surfaces are able to decrease the bacterial viability more than 5 orders with respect to the initial bacterial inoculum. That means that a relative low load of AgNPs on the PLL-modified titanium surfaces reaches 99.999% bacterial death after 24 h. The results of the present study are important to avoid infections in indwelling materials by reinforcing the preventive antibiotic therapy usually dosed throughout the surgical procedure and during the postoperative period.

Self-association of okadaic acid: structural and pharmacological significance.

Okadaic acid (OA) has been an invaluable pharmacological tool in the study of cellular signaling. The great affinity of this polyether for its targets together with its high specificity to inhibit certain protein phosphatases enables the differential study of these proteins. Crystallographic structures of protein phosphatases in complex with OA show a 1:1 protein to toxin ratio. Nevertheless, it has been found that OA is able to self-associate under certain conditions although very little is known about the importance of this phenomenon. Here we review the available knowledge on the latter topic and we report on the existence of an unusual self-associated tetrameric form. The structure of these oligomers is proposed based on spectroscopic data and molecular modeling calculations.

New findings for the composition and structure of Ni nanoparticles protected with organomercaptan molecules.

Here we explore the synthesis of alkanethiol-coated Ni NPs following the one-phase reaction method by Brust et al. The reduction of NiCl2 with NaBH4 in the presence of dodecanethiol (C12SH) yields a complex product that is difficult to identify as illustrated in the figure of merit. We synthesized Ni(II) dodecanethiolate (C12S) (without the addition of NaBH4) for comparison and performed an exhaustive characterization with TEM, HR-TEM, AFM, MFM, XPS, XRD, UV-vis, magnetism, and FT-IR. It is found that the organic coating is not quite a well-organized self-assembled monolayer (SAM) surrounding the Ni cluster as previously reported. XPS and XRD data show slight differences between both syntheses; however, Ni(II) thiolate appears to be more stable than reduced Ni when exposed to ambient air, indicating the propensity of metallic Ni to oxidize. It has been shown that irradiating with TEM electrons over various metal thiolates leads to nanoparticle formation. We irradiated over Ni(II) thiolate and observed no evidence of NP formation whereas irradiating a reduced Ni sample exhibited an ~3.0 nm nanoparticle diameter. Magnetism studies showed a difference between both samples, indicating ferromagnetic character for the reduced Ni sample. According to our results, the product of the synthesis is comprised of ultrasmall metallic clusters embedded in some form of Ni(II) C12S. In this work, we open a discussion of the chemical nature of the core and the shell in the synthesis of Ni NPs protected with organomercaptan molecules.

Microscopy analysis of pyramid formation evolution with ultra-low concentrated Na2CO3/NaHCO3 solution on (100) Si for solar cell application.

An analysis of the nucleation mechanism of pyramids formed in (100) silicon in Na2CO3/NaHCO3 solution has been carried out. This texturization process of silicon by means of Na2CO3/NaHCO3 solutions is of special interest because it can be applied to the silicon solar cell industry to texture solar cell surfaces to decrease the front reflection and enhance light trapping in the cells. For this purpose, two microscopy techniques-scanning electron microscopy and atomic force microscopy-have been used to study the different stages of pyramidal nucleation and formation. The different aspects and factors involved in the texturization process require different analysis conditions and microscopy resolution. Tracing the transformation of determined surface areas and structures has been achieved, contributing clarification of the mechanism of pyramid nucleation in Na2CO3/NaHCO3 solutions.

Nanocrystals distribution inside the writing lines in a glass matrix using Argon laser irradiation.

Localized modification in strontium barium niobate glass doped with Ho(3+) under laser irradiation has been carried out. The preliminary samples of this study have been fabricated by the melt quenching method and doped with 2.5% mol of Ho(3+). A 3.5W cw multiline Ar-laser has been focused and shifted in a line during laser irradiation. The formation of Strontium Barium Niobate nanocrystals has been confirmed by X-ray diffraction, atomic force microscope image and fluorescence. They have been localized in the irradiation line and change the optical properties of the sample. These nanocrystals have been obtained due to the excitation of the Ho(3+) ions which under nonradiative processes produced the heating of the sample. In this work, it has been demonstrated that the diffusion of the Nb(5+) ions to the border of the irradiated line controls the growth of the nanocrystals in the sample.

Electrochemical preparation and delivery of melanin-iron covered gold nanoparticles.

Attractive combination: Biopolymer-modified nanoparticles which combine magnetic properties with biocompatibility are prepared and delivered following a three-step strategy (see figure): i) Adsorption of thiol-capped metal nanoparticles on graphite, ii) electrochemical modification, iii) potential-induced delivery of the modified nanoparticles to the electrolyte. Thiol-capped gold nanoparticles modified with iron-melanin are attractive because they combine magnetic properties and biocompatibility. The biopolymer modified nanoparticles are prepared and delivered following a three step strategy: i) adsorption of thiol-capped metal nanoparticles on graphite, ii) electrochemical deposition of melanin-iron, iii) potential-induced delivery of the modified nanoparticles to the electrolyte.

Self-assembly of okadaic acid as a pathway to the cell.

The polyether toxin okadaic acid (OA) inhibits several protein serine/threonine phosphatases that play central roles in the regulation of many essential cellular processes. The use of scanning tunneling microscopy (STM) shows that dimerization of such toxins is crucial to understand the mechanism of toxin transport across model membranes.

Electrochemical self-assembly of alkanethiolate molecules on Ni(111) and polycrystalline Ni surfaces.

In this work, the electrochemical formation of alkanethiolate self-assembled monolayers (SAMs) on Ni(111) and polycrystalline Ni surfaces from alkanethiol-containing aqueous 1 M NaOH solutions was studied by combining Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS), electrochemical techniques, and density functional theory (DFT) calculations. Results show that alkanethiolates adsorb on Ni concurrent with NiO electroreduction. The resulting surface coverage depends on the applied potential and hydrocarbon chain length. Electrochemical and XPS data reveal that alkanethiolate electroadsorption at room temperature takes place without S-C bond scission, in contrast to previous results from gas-phase adsorption. A complete and dense monolayer, which is stable even at very high cathodic potentials (-1.5 V vs SCE), is formed for dodecanethiol. DFT calculations show that the greater stability against electrodesorption found for alkanethiolate SAMs on Ni, with respect to SAMs on Au, is somewhat related to the larger alkanethiolate adsorption energy but is mainly due to the larger barrier to interfacial electron transfer present in alkanethiolate-covered Ni. A direct consequence of this work is the possibility of using electrochemical self-assembly as a straightforward route to build stable SAMs of long-chained alkanethiolates on Ni surfaces at room temperature.

Electrochemical self-assembly of melanin films on gold.

An electrochemical method for self-assembling melanin films on the Au(111) surface from melanin aggregates in alkaline media is reported. Electrochemical data combined with scanning tunneling microscopy (STM), atomic force microscopy, and Auger electron spectoscopy show that the amount and structure of the deposited melanin film depend on the potential (E) applied to the electrochemical interface and deposition time. Film formation takes place at a noticeable rate at E = -1.0 V (vs SCE). High-resolution STM images at the early stages of growth show small particles, 5-8 nm in size and 0.3-0.4 nm in height, forming ordered arrays that follow closely the Au(111) topography. The size of the melanin particles increases as the film thickness increases, reaching 150 nm for deposits grown for 16 h. The deposited films are electrochemically active, showing well-defined redox couples preceding the hydrogen evolution reaction.