ABSTRACT
Behavioral neuroscience faces two conflicting demands: long-duration recordings from large neural populations and unimpeded animal behavior. To meet this challenge, we developed ONIX, an open-source data acquisition system with high data throughput (2GB/sec) and low closed-loop latencies (<1ms) that uses a novel 0.3 mm thin tether to minimize behavioral impact. Head position and rotation are tracked in 3D and used to drive active commutation without torque measurements. ONIX can acquire from combinations of passive electrodes, Neuropixels probes, head-mounted microscopes, cameras, 3D-trackers, and other data sources. We used ONIX to perform uninterrupted, long (~7 hours) neural recordings in mice as they traversed complex 3-dimensional terrain. ONIX allowed exploration with similar mobility as non-implanted animals, in contrast to conventional tethered systems which restricted movement. By combining long recordings with full mobility, our technology will enable new progress on questions that require high-quality neural recordings during ethologically grounded behaviors.
ABSTRACT
Wireless electrophysiology opens important possibilities for neuroscience, especially for recording brain activity in more natural contexts, where exploration and interaction are not restricted by the usual tethered devices. The limiting factor is transmission power and, by extension, battery life required for acquiring large amounts of neural electrophysiological data. We present a digital compression algorithm capable of reducing electrophysiological data to less than 65.5% of its original size without distorting the signals, which we tested in vivo in experimental animals. The algorithm is based on a combination of delta compression and Huffman codes with optimizations for neural signals, which allow it to run in small, low-power Field-Programmable Gate Arrays (FPGAs), requiring few hardware resources. With this algorithm, a hardware prototype was created for wireless data transmission using commercially available devices. The power required by the algorithm itself was less than 3 mW, negligible compared to the power saved by reducing the transmission bandwidth requirements. The compression algorithm and its implementation were designed to be device-agnostic. These developments can be used to create a variety of wired and wireless neural electrophysiology acquisition systems with low power and space requirements without the need for complex or expensive specialized hardware.
