Ethanol as Solvent Additives with Competitive Effect for High-Stable Aqueous Zinc Batteries.

Aqueous zinc-ion batteries are emerging as promising sustainable energy-storage devices. However, their cyclic stability is still a great challenge due to the inevitable parasitic reaction and dendrite growth induced by water. Herein, a cosolvent strategy based on competitive effect is proposed to address the aforementioned challenges. Ethanol with a higher Gutmann donor number demonstrates lower polarity and better wettability on the Zn surface compared with water, which endows ethanol with the ability of minimizing water activity by weakening H bonds and preferentially adsorbing on the Zn electrode. The above competitive advantages synergistically contribute to inhibiting the decomposition of free water and dendrite growth. Besides, an organic-inorganic hybrid solid-electrolyte interphase layer is in situ built based on ethanol additives, where organic matrix suppresses water corrosion while inorganic fillers promote fast Zn2+ diffusion. Consequently, the electrolyte with ethanol additives boosts a high reversibility of Zn deposition, long-term durability, as well as superior Zn2+ diffusibility in both Zn half-cells (Zn||Cu and Zn||Zn batteries) and Zn full cells (Zn||PTCDA and Zn||VO2 batteries). This work sheds light on a universal strategy to design a high-reversible and dendrite-free Zn anode for stable aqueous batteries.

K3 v2 (Po4 )3 /C as a New High-Voltage Cathode Material for Calcium-Ion Batteries with a Water-In-Salt Electrolyte.

Aqueous Ca-ion batteries (ACIBs) attract immense attention due to its high safety and the high abundance of calcium. However, the development of ACIBs is hindered by the lack of high voltage cathode materials to host the large radius and divalent Ca2+ . Herein, polyanionic phosphate K3 V2 (PO4 )3 /C (KVP/C) is provided as a new cathode material for ACIBs. Due to the robust structure of polyanion material and the wide electrochemical window of water-in-salt electrolyte, KVP/C delivers a high working voltage of 3.74 V versus Ca2+ /Ca with a specific capacity of 102.4 mAh g-1 and a long-life of 6000 cycles at 500 mA g-1 . Furthermore, the calcium storage mechanism of KVP/C is shown to be the coexistence of solid solution and two-phase reaction by in situ X-ray diffraction, ex situ transmission electron microscope, and X-ray photoelectron spectroscopy. Finally, an aqueous calcium-ion full cell, based on an organic compound as anode and KVP/C as cathode, is constructed and it shows good stability for 200 cycles and a specific capacity of 80.2 mAh g-1 . This work demonstrates that vanadium-based phosphate materials are promising high-voltage cathode materials for ACIBs and renew the prospects for ACIBs.

Reexamining the Role of Solution-Cast Ferroelectric Polymer Interlayer toward Enhanced Efficiency and Stability in Conventional Organic Solar Cells.

Interfacial modification is crucial for achieving efficient and stable organic solar cells (OSCs). Herein, an N,N-dimethylformamide (DMF) solution-cast poly(vinylidene fluoride-co-trifluoroethylene) (P(VDF-TrFE)) interlayer was applied to enhance the efficiency and stability of a range of OSCs, and the underlying mechanism was revealed via morphological and device physics studies. DMF rinse during the P(VDF-TrFE) interlayer casting process strengthens π-π stacking of the active layer with fibril aggregation, optimized phase separation, and vertical component distribution, while the P(VDF-TrFE) interlayer with rich diploes contributes to increased surface potential and internal electric field. The synergistic effect of the P(VDF-TrFE) interlayer and DMF rinse increases the PCEs of PM6:IT-4F, PM6:C5-16, and PM6:L8-BO OSCs from 12.7, 17.9, and 18.2% to 13.1, 18.7, and 18.8%, respectively. Additionally, OSCs containing the P(VDF-TrFE) interlayer also showed improved storage stability.

Coordinating the Edge Defects of Bismuth with Sulfur for Enhanced CO2 Electroreduction to Formate.

Bismuth-based materials have been recognized as promising catalysts for the electrocatalytic CO2 reduction reaction (ECO2 RR). However, they show poor selectivity due to competing hydrogen evolution reaction (HER). In this study, we have developed an edge defect modulation strategy for Bi by coordinating the edge defects of bismuth (Bi) with sulfur, to promote ECO2 RR selectivity and inhibit the competing HER. The prepared catalysts demonstrate excellent product selectivity, with a high HCOO- Faraday efficiency of ≈95 % and an HCOO- partial current of ≈250 mA cm-2 under alkaline electrolytes. Density function theory calculations reveal that sulfur tends to bind to the Bi edge defects, reducing the coordination-unsaturated Bi sites (*H adsorption sites), and regulating the charge states of neighboring Bi sites to improve *OCHO adsorption. This work deepens our understanding of ECO2 RR mechanism on bismuth-based catalysts, guiding for the design of advanced ECO2 RR catalysts.

Reversible Zn Metal Anodes Enabled by Trace Amounts of Underpotential Deposition Initiators.

Routine electrolyte additives are not effective enough for uniform zinc (Zn) deposition, because they are hard to proactively guide atomic-level Zn deposition. Here, based on underpotential deposition (UPD), we propose an "escort effect" of electrolyte additives for uniform Zn deposition at the atomic level. With nickel ion (Ni2+ ) additives, we found that metallic Ni deposits preferentially and triggers the UPD of Zn on Ni. This facilitates firm nucleation and uniform growth of Zn while suppressing side reactions. Besides, Ni dissolves back into the electrolyte after Zn stripping with no influence on interfacial charge transfer resistance. Consequently, the optimized cell operates for over 900 h at 1 mA cm-2 (more than 4 times longer than the blank one). Moreover, the universality of "escort effect" is identified by using Cr3+ and Co2+ additives. This work would inspire a wide range of atomic-level principles by controlling interfacial electrochemistry for various metal batteries.

Revealing the Interfacial Chemistry of Fluoride Alkyl Magnesium Salts in Magnesium Metal Batteries.

Exploring promising electrolyte-system with high reversible Mg plating/stripping and excellent stability is essential for rechargeable magnesium batteries (RMBs). Fluoride alkyl magnesium salts (Mg(ORF )2 ) not only possess high solubility in ether solvents but also compatible with Mg metal anode, thus holding a vast application prospect. Herein, a series of diverse Mg(ORF )2 were synthesized, among them, perfluoro-tert-butanol magnesium (Mg(PFTB)2 )/AlCl3 /MgCl2 based electrolyte demonstrates highest oxidation stability, and promotes the in situ formation of robust solid electrolyte interface. Consequently, the fabricated symmetric cell sustains a long-term cycling over 2000 h, and the asymmetric cell exhibits a stable Coulombic efficiency of 99.5 % over 3000 cycles. Furthermore, the Mg||Mo6 S8 full cell maintains a stable cycling over 500 cycles. This work presents guidance for understanding structure-property relationships and electrolyte applications of fluoride alkyl magnesium salts.

Serrated lithium fluoride nanofibers-woven interlayer enables uniform lithium deposition for lithium-metal batteries.

The uncontrollable formation of Li dendrites has become the biggest obstacle to the practical application of Li-metal anodes in high-energy rechargeable Li batteries. Herein, a unique LiF interlayer woven by millimeter-level, single-crystal and serrated LiF nanofibers (NFs) was designed to enable dendrite-free and highly efficient Li-metal deposition. This high-conductivity LiF interlayer can increase the Li+ transference number and induce the formation of 'LiF-NFs-rich' solid-electrolyte interface (SEI). In the 'LiF-NFs-rich' SEI, the ultra-long LiF nanofibers provide a continuously interfacial Li+ transport path. Moreover, the formed Li-LiF interface between Li-metal and SEI film renders low Li nucleation and high Li+ migration energy barriers, leading to uniform Li plating and stripping processes. As a result, steady charge-discharge in a Li//Li symmetrical cell for 1600 h under 4 mAh cm-2 and 400 stable cycles under a high area capacity of 5.65 mAh cm-2 in a high-loading Li//rGO-S cell at 17.9 mA cm-2 could be achieved. The free-standing LiF-NFs interlayer exhibits superior advantages for commercial Li batteries and displays significant potential for expanding the applications in solid Li batteries.

Basal Planes Unlocking and Interlayer Engineering Endows Proton Doped-MoO2.8F0.2 with Fast and Stable Magnesium Storage.

Molybdenum trioxide has served as a promising cathode material of rechargeable magnesium batteries (RMBs), because of its rich valence states and high theoretical capacity; yet, it still suffers from sluggish (de)intercalation kinetics and inreversible structure change for highly polarized Mg2+ in the interlayer and intralayer of structure. Herein, F- substitutional and H+ interstitial doping is proposed for α-MoO3 materials (denoted HMoOF) by the intralayer/interlayer engineering strategy to boost the performance of RMBs. F- substitutional doping generates molybdenum vacancies along the Mo-O-□ or Mo-F-□ configurations (where □ represents the cationic vacancy) for unlocking the inactive basal plane of the layered crystal structure, and it further accelerates Mg2+ diffusion along the b-axis. Interstitial-doped H+ can expand interlayer spacing for reducing Mg2+ energy barrier along the ac plane and serve as a "pillar" to stabilize the interlayer structure. Moreover, anion and cation dual doping trigger shallow impurity levels (acceptors levels and donor levels), which helps to easily acquire the electrons from the valence band and donate the electrons to the conduction band. Consequently, the HMoOF electrode exhibits a high reversible capacity (241 mA h g-1 at 0.1 A g-1), an excellent rate capability (137.4 mAh g-1 at 2 A g-1), and a long cycling stability (capacity retention of 98% after 800 cycles at 1 A g-1) in RMBs. This work affords meaningful insights in layered materials for developing high-kinetics and long-life RMBs.

VOPO4·2H2O as a new cathode material for rechargeable Ca-ion batteries.

VOPO4·2H2O, as a new cathode material for Ca-ion batteries, exhibits a discharge capacity of 100.6 mA h g-1, excellent cycling stability (200 cycles) and good rate performance (42.7 mA h g-1 at 200 mA g-1). In situ X-ray diffraction and in situ Raman results demonstrate the calcium-ion-storage mechanism of VOPO4·2H2O is a single-phase reaction based on asymmetric Ca2+ insertion and deinsertion.

Recent Advances in the Rational Design and Synthesis of Two-Dimensional Materials for Multivalent Ion Batteries.

With the increase of device requirements, rechargeable lithium-ion batteries are facing tremendous challenges in large-scale applications due to the high price and gradual shortage of lithium sources. In contrast, multivalent ion batteries, such as aluminum, magnesium, and zinc, are promising candidates for the next-generation energy-storage systems because of their high volumetric energy density, safe operation, and abundant reserves. The strong intercalation between multivalent ions and the host materials, however, will cause lower ion-diffusion kinetics and a poor discharge capacity. One of the main challenges is to search for a suitable cathode material with a high capacity and good structural stability to overcome the abovementioned problems. Two-dimensional layered materials, with characteristic unique structural features, good conductivity, and high electrochemically active surface, have attracted attention from researchers during the past decade. In this review, the design approach and synthetic procedures for the preparation of two-dimensional materials as cathodes for multivalent ion batteries, including interlayer engineering, two-dimensional heterostructures, pore/hole engineering, and heteroatom doping, are summarized. Meanwhile, the relationship between the design configuration and optimized electrochemical performance is rationally and systematically presented. Additionally, perspectives for the sustainable synthesis of cathode materials are proposed for multivalent metal-ion chemistry.