High-Throughput Preparation and High-Throughput Detection of Polymer-Dispersed Liquid Crystals Based on Ink-Jet Printing and Grayscale Value Analysis.

In this paper, based on high-throughput technology, polymer dispersed liquid crystals (PDLC) composed of pentaerythritol tetra (2-mercaptoacetic acid) (PETMP), trimethylolpropane triacrylate (TMPTA), and polyethylene glycol diacrylate (PEGD 600) were investigated in detail. A total of 125 PDLC samples with different ratios were quickly prepared using ink-jet printing. Based on the method of machine vision to identify the grayscale level of samples, as far as we know, it is the first time to realize high-throughput detection of the electro-optical performance of PDLC samples, which can quickly screen out the lowest saturation voltage of batch samples. Additionally, we compared the electro-optical test results of manual and high-throughput preparation PDLC samples and discovered that they had very similar electro-optical characteristics and morphologies. This demonstrated the viability of PDLC sample high-throughput preparation and detection, as well as promising application prospects, and significantly increased the efficiency of PDLC sample preparation and detection. The results of this study will contribute to the research and application of PDLC composites in the future.

High-Throughput Preparation and Machine Learning Screening of a Blue-Phase Liquid Crystal Based on Inkjet Printing.

Blue-phase liquid crystal (BPLC) is considered as the next-generation liquid crystal display material, but its practical application is seriously affected by a narrow temperature range and a long research period. In this paper, we used inkjet printing technology to prepare BPLC materials with high throughput, and try to use machine vision technology to test BPLC with high throughput. The "standard curve method" for establishing each printing channel and the "vector matching method" for searching the chromaticity value of the minimum distance were proposed to improve the accuracy of inkjet printing BPLC materials. For a large number of sample-phase images, we propose a machine learning method to identify the liquid crystal phase. In this paper, for the first time, the high-throughput preparation and high-throughput detection of 1080 BPLC samples with five common components by a comprehensive experimental method has been successfully realized. The results are helpful to improve the research efficiency of blue-phase materials and provide a theoretical basis and practical guidance for rapid screening of multi-component BPLC materials.

[Treatment of severe acromioclavicular joint dislocation with double strand titanium cable and clavicular hook plate guided by self-made guide device].

OBJECTIVE: To compare the clinical efficacy of titanium cable biomimetic reconstruction of coracoclavicular ligament and clavicular hook plate in the treatment of acromioclavicular joint dislocation. METHODS: The clinical data of 39 patients with severe acute acromioclavicular joint dislocation from January 2017 to December 2018 were retrospectively analyzed, 19 patients in double strand titanium cable group, including 13 males and 6 females, aged from 26 to 67 years old; Rockwood classification:10 cases of type Ⅲ, 4 cases of type Ⅳ and 5 cases of type Ⅴ;8 cases of traffic injury and 11 cases of fall injury;the time from injury to operation was 3 to 6 days. There were 20 patients in steel plate group, including 15 males and 5 females, aged from 25 to 71 years old. Rockwood classification:11 cases of type Ⅲ, 4 cases of typeⅣ, 5 cases of type Ⅴ;7 cases of traffic injury, 13 cases of fall injury;the time from injury to operation was 2 to 7 days. The length of incision, operation time, intraoperative blood loss, cost, VAS score before and after operation, and Constant-Murley score before and after operation were compared between two groups. Postoperative X-ray films were taken to observe the reduction and maintenance of acromioclavicular joint dislocation. Complications were recorded. RESULTS: Thirty-six patients were followed up for 12 to 14 months. The amount of intraoperative blood loss in the two groups was basically the same. The operation incision in double strand titanium cable group was shorter, the operation time in steel plate group was shorter, and the operation cost in double strand titanium cable group was less. One week and one year after operation, the pain of double strand titanium cable group was less than that of steel plate group. One year after operation, the Constant-Murley score of double strand titanium cable group was higher than that of steel plate group. The postoperative X-ray showed that the acromioclavicular joint in double strand titanium cable group was well reduced, and there was 1 case with slight reduction loss. In the plate group, there was no reduction loss after removal of the clavicular hook plate, and 8 patients had distal clavicular bone atrophy or acromion bone resorption. In steel plate group, 4 cases had long-term postoperative pain, postoperative dysfunction and other complications. CONCLUSION: The clinical effect of coracoclavicular ligament reconstruction with double strand titanium cable is better than that of clavicular hook plate in the treatment of severe acute acromioclavicular joint dislocation, with less trauma (no secondary operation) and lower cost.

Claudin-4 is required for vasculogenic mimicry formation in human breast cancer cells.

Vasculogenic mimicry (VM) refers to the unique capability of aggressive tumor cells to mimic the pattern of embryonic vasculogenic networks. Claudins are aberrantly expressed in aggressive breast cancer. However, the relationship between claudins and VM formation is not clear. We examined VM in two human breast cancer cell lines with different aggressive capabilities (MDA-MB-231 and MCF-7 cells) and one human umbilical vein endothelial cell line (HUVEC). Both HUVEC and MDA-MB-231 cells formed vascular channels in Matrigel cultures, while MCF-7 cells did not. Western blot analysis revealed a possible correlation between claudin-4 and -6 expression in breast cancer cell lines and tumor aggressiveness, with protein levels correlating with the ability to form vascular channels. Treatment of MDA-MB-231 and HUVEC cells with claudin-4 monoclonal antibodies completely inhibited the ability of cells to form vascular channels. Moreover, knockdown of claudin-4 by short hairpin RNA completely inhibited tubule formation in MDA-MB-231 cells. Overexpression of claudin-4 in MCF-7 cells induced formation of vascular channels. Immunocytochemistry revealed that membranous claudin-4 protein was significantly associated with vascular channel formation. Collectively, these results indicate that claudin-4 may play a critical role in VM in human breast cancer cells, opening new opportunities to improve aggressive breast cancer therapy.

[Clinical observation on influence of vertebral fixation through or across the affected vertebra on vertebral morphology].

OBJECTIVE: To compare the long-term influence of vertebral fixation through or across the affected vertebra on vertebral morphology. METHODS: Clinical data of 48 patients with simple thoracic and lumbar spinal fractures who were admitted between Jan. 2008 and Dec. 2010 were analyzed retrospectively. Among them 36 cases (28 males and 8 females) were fixed through the injured vertebra (group A) and 12 cases (8 males and 4 females) were fixed across the injured vertebra (group B). All patients were followed up for 6-36 months (mean 11.5 months). The vertebral body height, endplate angle and neurofunction were compared between the two groups before surgery, a week after surgery and at the end of the follow-up period. RESULTS: There was no statistically significant difference in vertebral body height,endplate angle and neurofunction before operation between group A and B (P > 0.05). Vertebral body height and endplate angle improved in both groups a week after operation and at the end of the follow-up period as compared with those before operation (P < 0.05), and the efficacy in group B was significantly better than that in group A (P < 0.05). There was no significant difference in neurofunction between the two groups (P > 0.05). CONCLUSION: The fixation method through the injured vertebra had a better reduction effect, more stable fixation, and a better long-term effect on vertebral morphology than that across the injured vertebra in the treatment of thoracolumbar vertebral fractures.

Application of trichloroacetic acid-acetone precipitation method for protein extraction in bone tissue / 中国医学科学院学报

<p><b>OBJECTIVE</b>To explore the feasibility and efficiency of extracting protein from bone tissue using trichloroacetic acid (TCA)-acetone precipitation method.</p><p><b>METHODS</b>Hydrochloric acid (HCL) decalcification method and TCA-acetone precipitation method were separately used for bone protein extraction. The efficiencies of these two methods were compared.</p><p><b>RESULTS</b>TCA-acetone precipitation method had significantly higher extraction efficiency. Compared with HCL decalcification method, it had less pollution from bone marrow hematopoietic tissue. Protein band distribution was similar between these two methods.</p><p><b>CONCLUSION</b>TCA-acetone precipitation method is useful for bone proteomics research.</p>

[Misunderstanding about the tension band principle in the treatment of patella fractures].

Kirschner's wire tension band was the first choice in the treatment of patella fracture. But the principle of tension band had been misunderstood for long time. In the traditional principle, it was believed that tension band could change the separating force between fracture fragments into compressing stress when exercising. Eccentric fixation and articular surface cracking were disadvantageous. These could make the fracture fragments separate either at resting or exercising, which cause the gaps without pressure. Thus excercising could not change the separating force into compressing stress.