Modeling the removal of Reactive Red 120 dye from aqueous effluents by activated carbon.

The adsorption isotherms of Reactive Red 120 (RR-120) on Brazilian pine-fruit shell activated carbon, at six temperatures (298, 303, 308, 313, 318 and 323 K) and pH = 6, were determined and interpreted using a double layer model with one energy. A statistical physics treatment established the formulation of this model. Steric and energetic parameters related to the adsorption process, such as the number of adsorbed molecules per site, the receptor sites density and the concentration at half-saturation, have been considered. Thermodynamic potential functions such as entropy, internal energy and Gibbs free enthalpy are analyzed, and the choice of the models is based on assumptions in correlation with experimental conditions. By numerical fitting, the investigated parameters were deduced. The theoretical expressions provide a good understanding and interpretation of the adsorption isotherms at the microscopic level. We believe that our work contributes to new theoretical insights on the dye adsorption in order to know the physical nature of the adsorption process.

Removal of pharmaceutical compounds from aqueous solution by novel activated carbon synthesized from lovegrass (Poaceae).

In this work, lovegrass (Cpa), an abundant grass of the Poaceae family, was employed as feedstock for the production of activated carbon in a conventional furnace using ZnCl2 as a chemical activator. The prepared material (Cpa-AC) was characterized by pH of the point of zero charges (pHpzc), Boehm's titration method, CHN/O elemental analysis, ATR-FTIR, N2 adsorption/desorption curves, and SEM. This carbon material was used for adsorption of acetylsalicylic acid (ASA) and sodium diclofenac (DFC). FTIR analysis identified the presence of O-H, N-H, O-C=O), C-O, and aromatic ring bulk and surface of (Cpa-AC) adsorbent. The quantification of the surface functional groups showed the presence of a large amount of acidic functional groups on the surface of the carbon material. The isotherms of adsorption and desorption of N2 confirm that the Cpa-AC adsorbent is mesopore material with a large surface area of 1040 m2 g-1. SEM results showed that the surface of Cpa-AC is rugous. The kinetic study indicates that the system followed the pseudo-second-order model (pH 4.0). The equilibrium time was achieved at 45 (ASA) and 60 min (DCF). The Liu isotherm model best fitted the experimental data. The maxima sorption capacities (Qmax) for ASA and DFC at 25 °C were 221.7 mg g-1 and 312.4 mg g-1, respectively. The primary mechanism of ASA and DFC adsorption was justified considering electrostatic interactions and π-π interactions between the Cpa-AC and the adsorbate from the solution.

Conversion of Eragrostis plana Nees leaves to activated carbon by microwave-assisted pyrolysis for the removal of organic emerging contaminants from aqueous solutions.

Eragrostis plana Nees leaves, abundant lignocellulosic biomass, was used as carbon source for preparation of activated carbon, by using microwave-assisted pyrolysis and chemical activation. The novel activated carbon (MWEPN) was characterised by FTIR, CHN elemental analysis, Boehm's titration method, TGA, SEM, N2 adsorption/desorption curves and pH of the point of zero charge (pHpzc). Afterwards, the adsorbent was successfully employed for adsorption of the two emerging contaminants (caffeine and 2-nitrophenol). The results indicated that MWEPN had a predominantly mesoporous structure with a high surface area of 1250 m2 g-1. FTIR analysis indicated the presence of carbonyl, hydroxyl and carboxylic groups on the surface of MWEPN. The Boehm analysis showed the existence of the high amount of acid moieties on the surface of activated carbon. Adsorption kinetic indicated that the system followed the Avrami fractional order at the optimal pH of 7. The equilibrium time was attained at 30 min. The Liu isotherm model better described the isothermal data. Based on the Liu isotherm, the maximum sorption capacities (Qmax) of caffeine and 2-nitrophenol adsorbed onto activated carbon at 25 °C were 235.5 and 255.8 mg g-1, respectively.