ABSTRACT
Correction for 'A graphene/h-BN MEMS varactor for sub-THz and THz applications' by Piotr A. Drózdz et al., Nanoscale, 2023, https://doi.org/10.1039/d2nr06863j.
ABSTRACT
Van der Waals heterostructures (vdWHSs) enable the fabrication of complex electronic devices based on two-dimensional (2D) materials. Ideally, these vdWHSs should be fabricated in a scalable and repeatable way and only in the specific areas of the substrate to lower the number of technological operations inducing defects and impurities. Here, we present a method of selective fabrication of vdWHSs via chemical vapor deposition by electron-beam (EB) irradiation. We distinguish two growth modes: positive (2D materials nucleate on the irradiated regions) on graphene and tungsten disulfide (WS2) substrates, and negative (2D materials do not nucleate on the irradiated regions) on the graphene substrate. The growth mode is controlled by limiting the air exposure of the irradiated substrate and the time between irradiation and growth. We conducted Raman mapping, Kelvin-probe force microscopy, X-ray photoelectron spectroscopy, and density-functional theory modeling studies to investigate the selective growth mechanism. We conclude that the selective growth is explained by the competition of three effects: EB-induced defects, adsorption of carbon species, and electrostatic interaction. The method here is a critical step toward the industry-scale fabrication of 2D-materials-based devices.
ABSTRACT
Recent development of terahertz systems has created the need for new elements operating in this frequency band, i.e., fast tunable devices such as varactors. Here, we present the process flow and characterization of a novel electronic variable capacitor device that is made with the use of 2D metamaterials such as graphene (GR) or hexagonal boron nitride (h-BN). Comb-like structures are etched into a silicon/silicon nitride substrate and a metal electrode is deposited at the bottom. Next, a PMMA/GR/h-BN layer is placed on top of the sample. As voltage is applied between GR and metal, the PMMA/GR/h-BN layer bends towards the bottom electrode thus decreasing the distance between electrodes and changing the capacitance. The high tunability and complementary metal oxide semiconductor (CMOS)-compatible process flow of the platform for our device and its millimeter size make it promising for applications in future electronics and terahertz technologies. The goal of our research is to integrate our device with dielectric rod waveguides, thus making THz phase shifters.
ABSTRACT
Two-dimensional (2D) transition metal dichalcogenides (TMDs) are increasingly investigated for applications such as optoelectronic memories, artificial neurons, sensors, and others that require storing photogenerated signals for an extended period. In this work, we report an environment- and gate voltage-dependent photocurrent modulation method of TMD monolayer-based devices (WS2 and MoS2). To achieve this, we introduce structural defects using mild argon-oxygen plasma treatment. The treatment leads to an extraordinary over 150-fold enhancement of the photocurrent in vacuum along with an increase in the relaxation time. A significant environmental and electrostatic dependence of the photocurrent signal is observed. We claim that the effect is a combined result of atomic vacancy introduction and oxide formation, strengthened by optimal wavelength choice for the modified surface. We believe that this work contributes to paving the way for tunable 2D TMD optoelectronic applications.
ABSTRACT
We report a surfactant-free exfoliation method of WS2 flakes combined with a vacuum filtration method to fabricate thin (<50 nm) WS2 films, that can be transferred on any arbitrary substrate. Films are composed of thin (<4 nm) single flakes, forming a large size uniform film, verified by AFM and SEM. Using statistical phonons investigation, we demonstrate structural quality and uniformity of the film sample and we provide first-order temperature coefficient χ, which shows linear dependence over 300-450 K temperature range. Electrical measurements show film sheet resistance RS = 48 MΩ/Υ and also reveal two energy band gaps related to the intrinsic architecture of the thin film. Finally, we show that optical transmission/absorption is rich above the bandgap exhibiting several excitonic resonances, and nearly feature-less below the bandgap.
ABSTRACT
A deep understanding of the thermal properties of 2D materials is crucial to their implementation in electronic and optoelectronic devices. In this study, we investigated the macroscopic in-plane thermal conductivity (κ) and thermal interface conductance (g) of large-area (mm2) thin film made from MoS2 nanoflakes via liquid exfoliation and deposited on Si/SiO2 substrate. We found κ and g to be 1.5 W/mK and 0.23 MW/m2K, respectively. These values are much lower than those of single flakes. This difference shows the effects of interconnections between individual flakes on macroscopic thin film parameters. The properties of a Gaussian laser beam and statistical optothermal Raman mapping were used to obtain sample parameters and significantly improve measurement accuracy. This work demonstrates how to address crucial stability issues in light-sensitive materials and can be used to understand heat management in MoS2 and other 2D flake-based thin films.
