Aligning π-Extended π-Deficient Ligands to Afford Submicrosecond Phosphorescence Radiative Decay Time of Mononuclear Ir(III) Complexes.

Herein, we report a profound investigation of the photophysical properties of three mononuclear Ir(III) complexes fac-Ir(dppm)3 (Hdppm-4,6-bis(4-(tert-butyl)phenyl)pyrimidine), Ir(dppm)2(acac) (acac-acetylacetonate), and Ir(ppy)2(acac) (Hppy-phenylpyridine). The heteroleptic Ir(dppm)2(acac) is found to emit with efficiency above 80% and feature a remarkably high rate of emission. As measured under ambient temperature, Ir(dppm)2(acac) emits with the unusually short (sub-µs) radiative decay time of τr = τem/ΦPL = 1/kr = 0.91 µs in degassed toluene and τr = 0.73 µs in a doped polystyrene film under nitrogen. Investigations at cryogenic temperatures in glassy toluene showed that the emission stems from the T1 state and thus represents T1 → S0 phosphorescence with individual decay times of the T1 substates of T1,I = 66 µs, T1,II = 7.3 µs, T1,III = 0.19 µs, and energy gaps between the substates of ΔE(T1,II-T1,I) = 14 cm-1 and ΔE(T1,III-T1,I) = 210 cm-1. Analysis of the electronic structure of Ir(dppm)2(acac) showed that such a high rate of phosphorescence may stem from the two dppm ligands, with extended π-conjugation system and π-deficient character due to the pyrimidine ring, being serially aligned along one axis. Such alignment, along with the quasi-symmetric character of Jahn-Teller distortions in the T1 state, affords a large chromophore, comprising four (het)aryl rings of the two dppm ligands. This affords an exceptionally large oscillator strength of the MLCT-character singlet state spin-orbit coupled with the T1 state and thus brings about enhancement of the phosphorescence rate. These findings reveal molecular design principles paving the way to new phosphors of enhanced emission rates.

Construction and performance of OLED devices prepared from liquid-crystalline TADF materials.

The device performance is reported for three compounds which show both thermally activated delayed fluorescence and liquid crystallinity, and use the donor 3,6-bis(3,4-didodecyloxyphenyl)carbazole. Two of the compounds, whose photophysics were reported previously, are based on a terephthalonitrile acceptor. A third and new compound is based on an isophthalonitrile acceptor and shows a more temperature-accessible mesophase and enhanced solution emission quantum yield. Two of the compounds show device external quantum efficiencies of between 2-3% and exhibit very small efficiency roll off. The responses are evaluated in terms of the specific nature of the materials.

Chemistry of glycol nucleic acid (GNA): Synthesis, photophysical characterization and insight into the biological activity of phenanthrenyl GNA constituents.

The knowledge pertaining to the chemistry and biological activity of glycol nucleic acid (GNA) components, like nucleosides and nucleotides, is still very limited. Herein we report on the preparation of the uracil nucleoside (1) and nucleotide ester GNA (2). The compounds are functionalised with a luminescent phenanthrenyl group. In DMSO, 1 and 2 are brightly fluorescent, with emission maxima at 390 nm, nanosecond decay times (0.6 and 0.75 ns, respectively), and quantum yields of ca. 0.2. In the solid phase, they show excimeric emission, with maxima at 495 nm (1) and 432 nm (2), and decay times of 3.7 ns (1) and 2.9 ns (2). The anticancer activity of the GNA components, as well as gemcitabine hydrochloride, used as a reference drug, were examined in vitro against human cancer HeLa and Ishikawa cells, as well as against normal L929 cells, using a battery of biochemical assays. Furthermore, biodistribution imaging studies were carried out in HeLa cells, with luminescence confocal microscopy, which showed that the compounds localized mainly in the lipophilic cellular compartments. Nucleoside (1) and nucleotide ester (2) features two different anticancer activity profiles. At 24 h of treatment, the nucleoside acts mainly as a toxin and induces necrosis in HeLa cells, whereas the nucleotide ester exhibits pro-apoptotic activity. At longer treatment times (72 h), the nucleoside and the reference, gemcitabine hydrochloride, featured almost identical signs of anticancer activity, such as S-phase cell cycle arrest, proliferation inhibition, and apoptosis induction. In view of this data, one can hypothesize that despite the structural differences, the newly obtained phenanthrenyl GNA nucleoside (1) and gemcitabine may share a common mechanism of anticancer activity in HeLa cancer cells. The GNA components were also examined as antiplasmodial agents against Plasmodium falciparum, in vitro. Nucleoside (1) was found to be more potent than nucleotide (2), displaying activity in the low micromolar range. Furthermore, both phenanthrene derivatives were found to display resistance indices at least 9-fold lower than chloroquine diphosphate (CQDP).

Near-infrared emitting copper(I) complexes with a pyrazolylpyrimidine ligand: exploring relaxation pathways.

Mononuclear copper(I) complexes [CuL2]I (1), [CuL2]2[Cu2I4]·2MeCN (2) and [CuL2]PF6 (3) with a new chelating pyrazolylpyrimidine ligand, 2-(3,5-dimethyl-1H-pyrazol-1-yl)-4,6-diphenylpyrimidine (L), were synthesized. In the structures of complex cations [CuL2]+, Cu+ ions coordinate two L molecules (N,N-chelating coordination). Extended π-systems of the L molecules in [CuL2]+ favor the formation of paired π-π stacking intramolecular interactions between the pyrimidine and phenyl rings leading to significant distortions of tetrahedral coordination cores, CuN4. The free ligand L demonstrates dual excitation wavelength dependent luminescence in the UV and violet regions, which is attributed to S1 → S0 fluorescence and T1 → S0 phosphorescence with intraligand charge transfer character. The complexes 1-3 demonstrate T1 → S0 phosphorescence in the near-infrared region. Theoretical investigations point to its ligand-to-metal charge transfer (LMCT) origin. Large Stokes shifts of emission (ca. 200 nm) are the result of notable planarizations of CuN4 cores in the T1 state as compared to the S0 state. Spin-orbit coupling computations revealed that the most effective intersystem crossing channels for [CuL2]+ appear in high-lying excited states, while the S1 → T1 transition is unfavourable according to El-Sayed's rule and the energy gap law. Electron-vibration coupling calculations showed that the C-C and C-N stretching vibrations of the pyrimidine and phenyl moieties, the asymmetric Cu-N stretching vibrations and the wagging motions of phenyl rings contribute the most to the non-radiative deactivation of L and [CuL2]+.

Near Infrared Phosphorescent Dinuclear Ir(III) Complex Exhibiting Unusually Slow Intersystem Crossing and Dual Emissive Behavior.

A dinuclear iridium(III) complex IrIr shows dual emission consisting of near infrared (NIR) phosphorescence (λmax = 714 nm, CH2Cl2, T = 300 K) and green fluorescence (λmax = 537 nm). The NIR emission stems from a triplet state (T1) localized on the ditopic bridging ligand (3LC). Because of the dinuclear molecular structure, the phosphorescence efficiency (ΦPL = 3.5%) is high compared to those of other known red/NIR-emitting iridium complexes. The weak fluorescence stems from the lowest excited singlet state (S1) of 1LC character. The occurrence of fluorescence is ascribed to relatively slow intersystem crossing (ISC) from state S1 (1LC) to the triplet manifold. The measured ISC rate corresponds to a time constant τISC of 2.1 ps, which is an order of magnitude longer than those usually found for iridium complexes. This slow ISC rate can be explained in terms of the LC character and large energy separation (0.57 eV) of the respective singlet and triplet excited states. IrIr is internalized by live HeLa cells as evidenced by confocal luminescence microscopy.

Fluorescent ß-ketoenole AmyGreen dye for visualization of amyloid components of bacterial biofilms.

Green-emitting water-soluble amino-ketoenole dye AmyGreen is proposed as an efficient fluorescent stain for visualization of bacterial amyloids in biofilms and the detection of pathological amyloids in vitro. This dye is almost non-fluorescent in solution, displays strong green emission in the presence of amyloid fibril of proteins. AmyGreen is also weakly fluorescent in presence to biomolecules that are components of cells, extracellular matrix or medium: nucleic acids, polysaccharides, lipids, and proteins. Thus, the luminescence turn-on behavior of AmyGreen can be utilized for visualization of amyloid components of bacterial biofilm extracellular matrix. Herein we report the application of AmyGreen for fluorescent staining of a number of amyloid-contained bacteria biofilms produced by Escherichia coli, Klebsiella pneumoniae, Pseudomonas aeruginosa, Bordetella avium, and Staphylococcus aureus. The effectiveness of AmyGreen was compared to traditional amyloid sensitive dye Thioflavine T. The main advantage of AmyGreen (concentration 10-5 M) is a higher sensitivity in the visualization of amyloid biofilm components over Thioflavine T (10-4 M) as it was revealed when staining E. coli and K. pneumoniae bacterial biofilms. Besides, AmyGreen displays lower cross-selectivity to nucleic acids as demonstrated both in in-solution experiments and upon staining of eukaryotic human mesenchymal stem cells used as amyloid-free negative control over amyloid-rich bacterial biofilms. The results point to a lower risk of false-positive response upon determination of amyloid components of bacterial biofilm using AmyGreen. Co-staining of biofilm by AmyGreen and cellulose sensitive dye Calcofluor White show difference in their staining patterns and localization, indicating separation of polysaccharide-rich and amyloid-rich regions of investigated biofilms. Thus, we suggest the new AmyGreen stain for visualization and differentiation of amyloid fibrils in bacterial biofilms to be used solely and in combination with other stains for confocal and fluorescence microscopy analysis.

Can Coumarins Break Kasha's Rule?

Coumarin C-2 was reported ( Signore et al., J. Am. Chem. Soc. , 2010 , 132 , 1276 and Brancato et al., J. Phys. Chem. B , 2015 , 119 , 6144 ) to break Kasha's rule. However, the two lowest excited singlet states of C-2 are separated by less than 0.5 eV. To slow down the S2 → S1 internal conversion and thus to enable the Kasha's rule-breaking S2 fluorescence, a much larger energy separation seems to be necessary. Thus, the photophysical behavior reported for C-2 raised very basic questions concerning mechanisms of nonradiative transitions in organic molecules. Herein we reinvestigated luminescence of C-2 and found that thoroughly purified C-2 does not show any dual fluorescence in steady-state experiments, contrary to the previous findings. The higher-energy emission, previously erroneously assigned as S2 → S0 fluorescence of C-2, stems from persistent impurity of the synthetic precursor (C-1).

Luminescent pyrenyl-GNA nucleosides: synthesis, photophysics and confocal microscopy studies in cancer HeLa cells.

Glycol nucleic acids (GNA) are synthetic genetic-like polymers with an acyclic three-carbon propylene glycol phosphodiester backbone. Here, synthesis, luminescence properties, circular dichroism (CD) spectra, and confocal microscopy speciation studies of (R,S) and (S,R) pyrenyl-GNA (pyr-GNA) nucleosides are reported in HeLa cells. Enantiomerically pure nucleosides were obtained by a Sharpless asymmetric dihydroxylation reaction followed by semi-preparative high-performance liquid chromatography (HPLC) separation using Amylose-2 as the chiral stationary phase. The enantiomeric relationship between stereoisomers was confirmed by CD spectra, and the absolute configurations were assigned based on experimental and theoretical CD spectra comparisons. The pyr-GNA nucleosides were not cytotoxic against human cervical (HeLa) cancer cells and thus were utilized as luminescent probes in the imaging of these cells with confocal microscopy. Cellular staining patterns were identical for both enantiomers in HeLa cells. Compounds showed no photocytotoxic effect and were localized in the lipid membranes of the mitochondria, in cellular vesicles and in other lipid cellular compartments. The overall distribution of the pyrene and pyrenyl-GNA nucleosides inside the living HeLa cells differed, since the former compound gives a more granular staining pattern and the latter a more diffuse one.

Ag(i) complex design affording intense phosphorescence with a landmark lifetime of over 100 milliseconds.

A highly emissive Ag(i) complex comprising 2,9-dimethyl-1,10-phenanthroline (dmp) and bis[(2-diphenylphosphino)phenyl] ether (dpep) ligands was synthesized, characterized and investigated for its photophysical properties both experimentally and theoretically. The material exhibits intense phosphorescence from the triplet state of ligand centered (3LC) character featuring an unprecedented long lifetime of τ = 110 ms and a quantum yield of ΦPL = 50%, as measured for a doped PMMA matrix under ambient conditions. This is an efficient yet exceptionally slow emission decay, breaking the previous record by several orders of magnitude. Such properties are attributed to two factors: (i) the Ag(i) ion introduces weak spin-orbit coupling and efficient population of the emitting triplet state; (ii) the rigid molecular design combined with a matrix-based rigidity largely suppresses non-radiative relaxations.

Excited-State Switching between Ligand-Centered and Charge Transfer Modulated by Metal-Carbon Bonds in Cyclopentadienyl Iridium Complexes.

Three series of pentamethylcyclopentadienyl (Cp*) Ir(III) complexes with different bidentate ligands were synthesized and structurally characterized, [Cp*Ir(tpy)L] n+ (tpy = 2-tolylpyridinato; n = 0 or 1), [Cp*Ir(piq)L] n+ (piq = 1-phenylisoquinolinato; n = 0 or 1), and [Cp*Ir(bpy)L] m+ (bpy = 2,2'-bipyridine; m = 1 or 2), featuring a range of monodentate carbon-donor ligands within each series [L = 2,6-dimethylphenylisocyanide; 3,5-dimethylimidazol-2-ylidene (NHC); methyl)]. The spectroscopic and photophysical properties of these molecules and those of the photocatalyst [Cp*Ir(bpy)H]+ were examined to establish electronic structure-photophysical property relationships that engender productive photochemical reactivity of this hydride and its methyl analogue. The Ir(III) chromophores containing ancillary CNAr ligands exhibited features anticipated for predominantly ligand-centered (LC) excited states, and analogues bearing the NHC ancillary exhibited properties consistent with LC excited states containing a small admixture of metal-to-ligand charge-transfer (MLCT) character. However, the molecules featuring anionic and strongly σ-donating methyl or hydride ligands exhibited photophysical properties consistent with a high degree of CT character. Density functional theory calculations suggest that the lowest energy triplet states in these complexes are composed of a mixture of MLCT and ligand-to-ligand CT originating from both the Cp* and methyl or hydride ancillary ligands. The high degree of CT character in the triplet excited states of methyliridium complexes bearing C^N-cyclometalated ligands offer a striking contrast to the photophysical properties of pseudo-octahedral structures fac-Ir(C^N)3 or Ir(C^N)2(acac) that have lowest-energy triplet excited states characterized as primarily LC character with a more moderate MLCT admixture.

Temperature dependence of photophysical properties of a dinuclear C

The temperature dependence (1.7 K < T < 100 K) of emission decay is reported for the first time for a type of di-nuclear Pt complex featuring a metal-metal-to-ligand charge transfer (MMLCT) lowest energy transition that arises from a strong Pt-Pt interaction. The effect of local variation of the host/guest cage in a polymer matrix upon the phosphorescence decay time constants is characterized by the Kohlrausch-Williams-Watts function. The temperature dependence of the average decay time constants is fit by a Boltzmann-type expression to obtain the average zero-field splittings and individual sublevel decay rates of the photoluminescent triplet excited state.

Design of Conformationally Distorted Donor-Acceptor Dyads Showing Efficient Thermally Activated Delayed Fluorescence.

A highly potent donor-acceptor biaryl thermally activated delayed fluorescence (TADF) dye is accessible by a concise two-step sequence employing two-fold Ullmann arylation and a sequentially Pd-catalyzed Masuda borylation-Suzuki arylation (MBSA). Photophysical investigations show efficient TADF at ambient temperature due to the sterical hindrance between the donor and acceptor moieties. The photoluminescence quantum yield amounts to ΦPL = 80% in toluene and 90% in PMMA arising from prompt and delayed fluorescence with decay times of 21 ns and 30 µs, respectively. From an Arrhenius plot, the energy gap Δ E(S1 - T1) between the lowest excited singlet S1 and triplet T1 state was determined to be 980 cm-1 (120 meV). A new procedure is proposed that allows us to estimate the intersystem crossing time to ∼102 ns.

Pyrene-nucleobase conjugates: synthesis, oligonucleotide binding and confocal bioimaging studies.

Fluorescent pyrene-linker-nucleobase (nucleobase = thymine, adenine) conjugates with carbonyl and hydroxy functionalities in the linker were synthesized and characterized. X-ray single-crystal structure analysis performed for the pyrene-C(O)CH2CH2-thymine (2) conjugate reveals dimers of molecules 2 stabilized by hydrogen bonds between the thymine moieties. The photochemical characterization showed structure-dependent fluorescence properties of the investigated compounds. The conjugates bearing a carbonyl function represent weak emitters as compared to compounds with a hydroxy function in the linker. The self-assembly properties of pyrene nucleobases were investigated in respect to their binding to single and double strand oligonucleotides in water and in buffer solution. In respect to the complementary oligothymidine T10 template in water, compounds 3 and 5 both show a self-assembling behavior according to canonical base-base pairing. However, in buffer solution, derivative 5 was much more effective than 3 in binding to the T10 template. Furthermore the adenine derivative 5 binds to the double-stranded (dA)10-T10 template with a self-assembly ratio of 112%. Such a high value of a self-assembly ratio can be rationalized by a triple-helix-like binding, intercalation, or a mixture of both. Remarkably, compound 5 also shows dual staining pattern in living HeLa cells. Confocal microscopy confirmed that 5 predominantly stains mitochondria but it also accumulates in the nucleoli of the cells.

Thermally Activated Delayed Fluorescence from Ag(I) Complexes: A Route to 100% Quantum Yield at Unprecedentedly Short Decay Time.

The four new Ag(I) complexes Ag(phen)(P2-nCB) (1), Ag(idmp)(P2-nCB) (2), Ag(dmp)(P2-nCB) (3), and Ag(dbp)(P2-nCB) (4) with P2-nCB = bis(diphenylphosphine)-nido-carborane, phen = 1,10-phenanthroline, idmp = 4,7-dimethyl-1,10-phenanthroline, dmp = 2,9-dimethyl-1,10-phenanthroline, and dbp = 2,9-di-n-butyl-1,10-phenanthroline were designed to demonstrate how to develop Ag(I) complexes that exhibit highly efficient thermally activated delayed fluorescence (TADF). The substituents on the 1,10-phenanthroline ligand affect the photophysical properties strongly (i) electronically via influencing the radiative rate of the S1 → S0 transition and (ii) structurally by rigidifying the molecular geometry with respect to geometry changes occurring in the lowest excited S1 and T1 states. The oscillator strength of the S1 ↔ S0 transition f(S1 ↔ S0)-an important parameter for the TADF efficiency being proportional to the radiative rate-can be increased from f(S1 ↔ S0) = 0.0258 for Ag(phen)(P2-nCB) (1) to f(S1 ↔ S0) = 0.0536 for Ag(dbp)(P2-nCB) (4), as calculated for the T1 state optimized geometries. This parameter governs the radiative TADF decay time (τr) at ambient temperature, found to be τr = 5.6 µs for Ag(phen)(P2-nCB) (1) but only τr = 1.4 µs for Ag(dbp)(P2-nCB) (4)-a record TADF value. In parallel, the photoluminescence quantum yield (ΦPL) measured for powder samples at ambient temperature is boosted up from ΦPL = 36% for Ag(phen)(P2-nCB) (1) to ΦPL = 100% for Ag(dbp)(P2-nCB) (4). This is a consequence of a cooperative effect of both decreasing the nonradiative decay rate and increasing the radiative decay rate in the series from Ag(phen)(P2-nCB) (1), Ag(idmp)(P2-nCB) (2), and Ag(dmp)(P2-nCB) (3) to Ag(dbp)(P2-nCB) (4). Another parameter important for the TADF behavior is the activation energy of the S1 state from the state T1, ΔE(S1-T1). Experimentally it is determined for the complexes Ag(dmp)(P2-nCB) (3) and Ag(dbp)(P2-nCB) (4) to be of moderate size of ΔE(S1-T1) = 650 cm-1.

TADF Material Design: Photophysical Background and Case Studies Focusing on CuI and AgI Complexes.

The development of organic light emitting diodes (OLEDs) and the use of emitting molecules have strongly stimulated scientific research of emitting compounds. In particular, for OLEDs it is required to harvest all singlet and triplet excitons that are generated in the emission layer. This can be achieved using the so-called triplet harvesting mechanism. However, the materials to be applied are based on high-cost rare metals and therefore, it has been proposed already more than one decade ago by our group to use the effect of thermally activated delayed fluorescence (TADF) to harvest all generated excitons in the lowest excited singlet state S1 . In this situation, the resulting emission is an S1 →S0 fluorescence, though a delayed one. Hence, this mechanism represents the singlet harvesting mechanism. Using this effect, high-cost and strong SOC-carrying rare metals are not required. This mechanism can very effectively be realized by use of CuI or AgI complexes and even by purely organic molecules. In this investigation, we focus on photoluminescence properties and on crucial requirements for designing CuI and AgI materials that exhibit short TADF decay times at high emission quantum yields. The decay times should be as short as possible to minimize non-radiative quenching and, in particular, chemical reactions that frequently occur in the excited state. Thus, a short TADF decay time can strongly increase the material's long-term stability. Here, we study crucial parameters and analyze their impact on the TADF decay time. For example, the energy separation ΔE(S1 -T1 ) between the lowest excited singlet state S1 and the triplet state T1 should be small. Accordingly, we present detailed photophysical properties of two case-study materials designed to exhibit a large ΔE(S1 -T1 ) value of 1000 cm-1 (120 meV) and, for comparison, a small one of 370 cm-1 (46 meV). From these studies-extended by investigations of many other CuI TADF compounds-we can conclude that just small ΔE(S1 -T1 ) is not a sufficient requirement for short TADF decay times. High allowedness of the transition from the emitting S1 state to the electronic ground state S0 , expressed by the radiative rate kr (S1 →S0 ) or the oscillator strength f(S1 →S0 ), is also very important. However, mostly small ΔE(S1 -T1 ) is related to small kr (S1 →S0 ). This relation results from an experimental investigation of a large number of CuI complexes and basic quantum mechanical considerations. As a consequence, a reduction of τ(TADF) to below a few µs might be problematic. However, new materials can be designed for which this disadvantage is not prevailing. A new TADF compound, Ag(dbp)(P2 -nCB) (with dbp=2,9-di-n-butyl-1,10-phenanthroline and P2 -nCB=bis-(diphenylphosphine)-nido-carborane) seems to represent such an example. Accordingly, this material shows TADF record properties, such as short TADF decay time at high emission quantum yield. These properties are based (i) on geometry optimizations of the AgI complex for a fast radiative S1 →S0 rate and (ii) on restricting the extent of geometry reorganizations after excitation for reducing non-radiative relaxation and emission quenching. Indeed, we could design a TADF material with breakthrough properties showing τ(TADF)=1.4 µs at 100 % emission quantum yield.

Mitochondria Targeting with Luminescent Rhenium(I) Complexes.

Two new neutral fac-[Re(CO)3(phen)L] compounds (1,2), with phen = 1,10-phenanthroline and L = O2C(CH2)5CH3 or O2C(CH2)4C≡CH, were synthetized in one-pot procedures from fac-[Re(CO)3(phen)Cl] and the corresponding carboxylic acids, and were fully characterized by IR and UV-Vis absorption spectroscopy, ¹H- and 13C-NMR, mass spectrometry and X-ray crystallography. The compounds, which display orange luminescence, were used as probes for living cancer HeLa cell staining. Confocal microscopy revealed accumulation of both dyes in mitochondria. To investigate the mechanism of mitochondrial staining, a new non-emissive compound, fac-[Re(CO)3(phen)L], with L = O2C(CH2)3((C5H5)Fe(C5H4), i.e., containing a ferrocenyl moiety, was synthetized and characterized (3). 3 shows the same mitochondrial accumulation pattern as 1 and 2. Emission of 3 can only be possible when ferrocene-containing ligand dissociates from the metal center to produce a species containing the luminescent fac-[Re(CO)3(phen)]⁺ core. The release of ligands from the Re center was verified in vitro through the conjugation with model proteins. These findings suggest that the mitochondria accumulation of compounds 1-3 is due to the formation of luminescent fac-[Re(CO)3(phen)]⁺ products, which react with cellular matrix molecules giving secondary products and are uptaken into the negatively charged mitochondrial membranes. Thus, reported compounds feature a rare dissociation-driven mechanism of action with great potential for biological applications.

Modulation of Intersystem Crossing Rate by Minor Ligand Modifications in Cyclometalated Platinum(II) Complexes.

Photophysical properties of four new platinum(II) complexes comprising extended ppy (Hppy = 2-phenylpyridine) and thpy (Hthpy = 2-(2'-thienyl)pyridine) cyclometalated ligands and acetylacetonate (acac) are reported. Substitution of the benzene ring of Pt-ppy complexes 1 and 2 with a more electron-rich thiophene of Pt-thpy complexes 3 and 4 leads to narrowing of the HOMO-LUMO gap and thus to a red shift of the lowest energy absorption band and phosphorescence band, as expected for low-energy excited states of the intraligand/metal-to-ligand charge transfer character. However, in addition to these conventional spectral shifts, another, at first unexpected, substitution effect occurs. Pt-thpy complexes 3 and 4 are dual emissive showing fluorescence about 6000 cm(-1) (∼0.75 eV) higher in energy relative to the phosphorescence band, while for Pt-ppy complexes 1 and 2 only phosphorescence is observed. For dual-emissive complexes 3 and 4, ISC rates kISC are estimated to be in order of 10(9)-10(10) s(-1), while kISC of Pt-ppy complexes 1 and 2 is much faster amounting to 10(12) s(-1) or more. The relative intensities of the fluorescence and phosphorescence signals of Pt-thpy complexes 3 and 4 depend on the excitation wavelength, showing that hyper-intersystem crossing (HISC) in these complexes is observably significant.

Diversity of copper(I) complexes showing thermally activated delayed fluorescence: basic photophysical analysis.

A comparison of three copper(I) compounds [1, Cu(dppb)(pz2Bph2); 2, Cu(pop)(pz2Bph2); 3, Cu(dmp)(phanephos)(+)] that show pronounced thermally activated delayed fluorescence (TADF) at ambient temperature demonstrates a wide diversity of emission behavior. In this study, we focus on compound 1. A computational density functional theory (DFT)/time-dependent DFT approach allows us to predict detailed photophysical properties, while experimental emission studies over a wide temperature range down to T = 1.5 K lead to better insight into the electronic structures even with respect to spin-orbit coupling efficiencies, radiative rates, and zero-field splitting of the triplet state. All three compounds, with emission quantum yields higher than ϕPL = 70%, are potentially well suited as emitters for organic light-emitting diodes (OLEDs) based on the singlet-harvesting mechanism. Interestingly, compound 1 is by far the most attractive one because of a very small energy separation between the lowest excited singlet S1 and triplet T1 state of ΔE(S1-T1) = 370 cm(-1) (46 meV). Such a small value has not been reported so far. It is responsible for the very short decay time of τ(TADF, 300 K) = 3.3 µs. Hence, if focused on the requirements of a short TADF decay time for reduction of the saturation effects in OLEDs, copper(I) complexes are well comparable or even slightly better than the best purely organic TADF emitters.

Synthesis and (spectro)electrochemistry of mixed-valent diferrocenyl-dihydrothiopyran derivatives.

Three novel diferrocenyl complexes were prepared and characterised. 2,2-Diferrocenyl-4,5-dimethyl-3,6-dihydro-2H-thiopyran (1, sulphide) was accessible by the hetero-Diels-Alder reaction of diferrocenyl thioketone with 2,3-dimethyl-1,3-butadiene. Stepwise oxidation of 1 gave the respective oxides 2,2-diferrocenyl-4,5-dimethyl-3,6-dihydro-2H-thiopyran-1-oxide (2, sulfoxide) and 2,2-diferrocenyl-4,5-dimethyl-3,6-dihydro-2H-thiopyran-1,1-dioxide (3, sulfone), respectively. The molecular structures of 1 and 3 in the solid state were determined by single crystal X-ray crystallography. The oxidation of sulphide 1 to sulfone 3, plays only a minor role on the overall structure of the two compounds. Electrochemical (cyclic voltammetry (= CV), square wave voltammetry (= SWV)) and spectroelectrochemical (in situ UV-Vis/NIR spectroscopy) studies were carried out. The CV and SWV measurements showed that an increase of the sulphur atom oxidation from -2 in 1 to +2 in 3 causes an anodic shift of the ferrocenyl-based oxidation potentials of about 100 mV. The electrochemical oxidation of 1-3 generates mixed-valent cations 1(+)-3(+). These monooxidised species display low-energy electronic absorption bands between 1000 and 3000 nm assigned to IVCT (= Inter-Valence Charge Transfer) electronic transitions. Accordingly, the mixed-valent cations 1(+)-3(+) are classified as weakly coupled class II systems according to Robin and Day.

Brightly luminescent Pt(II) pincer complexes with a sterically demanding carboranyl-phenylpyridine ligand: a new material class for diverse optoelectronic applications.

A series of three Pt(II) complexes with a doubly cyclometalating terdentate ligand L1, L1H2 = 3,6-bis(p-anizolyl)-2-carboranyl-pyridine, and diethyl sulfide (1), triphenylphosphine (2), and t-butylisonitrile (3) as ancillary ligands were synthesized. X-ray diffraction studies of 1 and 2 show a coordination of the L1 ligand in a C-N-C mode in which the bulky and rigid o-carborane fragment is cyclometalated via a C atom. Importantly, no close intermolecular Pt-Pt contacts occur with this ligand type. The new Pt(II) pincer complexes display very high luminescence quantum yields at decay times of several tens of µs even in solution under ambient conditions. On the basis of the low-temperature (T = 1.3 K) emission decay behavior, the emission is assigned to a ligand centered triplet excited state (3)LC with small (1,3)MLCT admixtures. Because the phosphorescence is effectively quenched by molecular oxygen, optical sensors operating in a wide range of oxygen pressure can be developed. Owing to the very high luminescence quantum yields, the new materials might also become attractive as emitter materials for diverse optoelectronic applications.