Predictability of tooth rotations in patients treated with clear aligners.

Clear aligners are employed daily for the treatment of several malocclusions. Previous clinical studies indicated low accuracy for the correction of tooth rotations. The aim of this study was to evaluate the predictability of tooth rotations with clear aligners. The sample comprised 390 teeth (190 mandibular; 200 maxillary), measured from the virtual models of 45 participants (21 men, 24 women; mean age: 29.2 ± 6.6 years old). For each patient, pre-treatment (T0) digital dental models (STL files), virtual plan (T1) and post-treatment digital dental models (T2) of both the mandibular and maxillary arches were imported onto Geomagic Control X, a 3D metrology software which allows angular measurements. Rotations were calculated by defining reproducible vectors for all teeth in each STL file and superimposing both T0 with T1 to determine the prescribed rotation, and T0 with T2 to determine the achieved rotation. Prescribed and achieved rotations were compared to assess movement's accuracy. The Wilcoxon signed-rank test and paired t-test were used to assess differences between the prescribed and achieved movements (P < 0.05). The overall predictability of rotational movement was 78.6% for the mandibular arch and 75.0% for the maxillary arch. Second molar accuracy was the lowest in both arches. Clear aligners were not able to achieve 100% of the planned movements.

Preformed Elastodontic Appliances: Awareness and Attitude of Orthodontists and General Dental Practitioners.

BACKGROUND: Preformed elastodontic appliances (EAs) have been described as safe, cost-effective, and easy-to-use devices for interceptive orthodontic treatment in growing patients. This study aimed to assess the knowledge and the attitude of dentists toward the use of EAs and to compare the behaviors of orthodontists (Os) with those of general dental practitioners (GDPs). METHODS: An anonymous survey was distributed among dentists through social media. Twenty-two items were divided as follows: characteristics of respondents; general knowledge about EAs; section for EA-users; and section for EA non-users. Chi-squared tests were used to analyze differences in responses between groups. RESULTS: Participants included 226 Os and 168 GDPs. The majority in both groups reported having adequate knowledge about EAs and utilizing them in their practice. GDPs usually use EAs to treat children during the early phase of growth, while Os also use EAs to address orthodontic problems in different stages of dentition, experiencing a chair time reduction compared with traditional appliances. Regarding EA non-users, GDPs seem not to find an application among their patients, whereas Os reported not having enough patient compliance during treatment. CONCLUSIONS: Although treatment with EAs is common among all dentists, differences exist between Os and GDPs in the awareness and application, as well as in the reasons provided for not using EAs.

Cephalometric changes of pushing splints 3 compared to rapid maxillary expansion and facemask therapy on the airway space in class III growing patients: A randomized clinical trial.

BACKGROUND: Early orthopaedic treatment with rapid maxillary expansion (RME) associated with facemask (FM) has been shown to be effective in correcting Class III malocclusions in children. Treatment with pushing splints 3 (PS3) has shown to correct skeletal discrepancies in Class III growing patients. However, the effects of orthopaedic treatment on the upper airways in children with Class III malocclusion is controversial. OBJECTIVES: The aim of this study was to evaluate the cephalometric changes in the airways of PS3 compared to the RME/FM protocol. MATERIALS AND METHODS: In this study, 48 patients with Class III malocclusion (age range 5.5-8.5 years old) were selected for this study, and 24 were treated with PS3 appliance and 24 with RME/FM therapy. Lateral cephalograms before (T0) and at the end of the treatment (T1) were analysed to compare pharyngeal spaces. Paired and unpaired t tests were used for data analysis (P < .05). RESULTS: A total of 41 patients (21 patients for the PS3 group, 11 males and 10 females, mean age 7.0 ± 1.2 years; 20 patients for the RME/FM group, 10 males and 10 females, mean age 7.2 ± 1.3 years) were included. The results showed a statistically significant (P < .05) increase in the nasopharyngeal space after both therapies. However, the effects were similar considering that there were no differences between groups for the assessed variables at T0-T1. CONCLUSIONS: Early treatment of Class III malocclusion with PS3 does not induce a statistically significant increase in the sagittal airway space compared to RME/FM. The absence of untreated group could not define the role of growth in the increase of space.

Biomechanically and Periodontally-Based Orthodontic Treatment of a Patient with Upper Canine Affected by External Cervical Resorption (ECR): A Case Report.

(1) Background: Orthodontic treatment may be a potential predisposing factor for ECR. The affected tooth goes to ankylosis, which could lead to a malocclusion. Although teeth severely affected by ECR (class IV Heithersay) are usually extracted, this case report aims to present the use of an ECR class IV upper canine, both as ankylosed to solve the malocclusion and the occlusal plane canting, as well as not ankylosed to correct its ridge defect with orthodontic extrusion. (2) Methods: A 14-year-old male, complaining of an ugly smile and a failed orthodontic attempt to recover an impacted canine, was referred to the orthodontic clinic. He was diagnosed with class II right subdivision, midline deviation, both upper and lower occlusal plane canting, and an upper left canine, previously impacted, showing ECR class IV. The treatment first included canting resolution with a cantilever and a spring, exploiting the anchorage offered by the ankylosed ECR canine. Then, a coronectomy, endodontic treatment, and orthodontic extrusion of that canine were performed to obtain the implant site development. (3) Results: Clinical and radiographic outcomes showed normocclusion and better bony conditions for safer implant placement in the aesthetic zone. (4) Conclusions: The high aesthetics and the periodontal and bony conditions obtained are probably not achievable by other therapeutic alternatives.

Maxillary Impacted Canine and Upper Lateral Incisor Agenesis Treatment with "Canine First Technique" and Clear Aligners: A Case Report.

The aim of this study was to show a case of an impacted canine in an adult patient with agenesis of the maxillary lateral incisor treated with clear aligners (CA). A 19-year-old male with a persistence of 5.3 and absence of 1.2 came to our department of the School of Orthodontics at the University of Federico II in Naples and asked for an aesthetic treatment. The Canine First approach was used to surgically expose the canine and pull it into the dental arch. In order to ensure long-term aesthetic, periodontal, and occlusal results, a treatment with CAs to close the space through the mesial placement of the canine and the enameloplasty of the tooth crown was performed. At the end of the treatment, the occlusal objectives were achieved.

Accuracy of digital workflow for placing orthodontic miniscrews using generic and licensed open systems. A 3d imaging analysis of non-native .stl files for guided protocols.

BACKGROUND: This study aimed to assess the accuracy of digital workflow for guided insertion of miniscrews in the anterior palate using restorative implant dentistry software and licensed software for orthodontic applications. METHODS: Twenty subjects (8 males, 12 females, mean age = 16.7 ± 2.1 years) were prospectively selected to receive guided insertion of bicortical palatal miniscrews. Virtual planning was performed using restorative implant dentistry software (Blue Sky Plan*, version 4.7) (group 1 = 10 subjects) and licensed orthodontic software (Dolphin Imaging Software, version 11.0) (group 2 = 10 subjects). A specific 3D Imaging technology was applied to permit the registration of the planned and achieved position of the miniscrews based on the superimposition of maxillary models. The angular deviation (accuracy error) between the planned and the achieved positions of the miniscrews were recorded. Independent Student's test was used with statistical significance set at p value < 0.05. RESULTS: The mean accuracy error recorded in group 1 was 7.15° ± 1.09 (right side) and 6.19 ± 0.80 (left side) while the mean error in group 2 was 6.74° ± 1.23 (right side) and 5.79 ± 0.95 (left side). No significant differences were recorded between the two groups (p > 0.05); instead, miniscrews placed on the right side were almost one degree higher than the left side (p < 0.05) in both groups. CONCLUSIONS: The clinical accuracy error was similar when using generic and licensed orthodontic software for guided systems.

Impact of Clear Aligners versus Fixed Appliances on Periodontal Status of Patients Undergoing Orthodontic Treatment: A Systematic Review of Systematic Reviews.

The present umbrella review of four systematic reviews with meta-analysis aimed to assess whether clear aligners are associated with better periodontal conditions compared with fixed appliances in patients undergoing orthodontic treatment. The present study protocol was developed in accordance with the PRISMA statement before the literature search, data extraction, and analysis and was registered on PROSPERO (CRD42023401808). The question formulation, search, and study selection strategies were developed according to the PICO model. Systematic reviews with a meta-analysis published in English without date restriction were electronically searched across the Cochrane Library, Web of Science (Core Collection), Scopus, EMBASE, and MEDLINE/PubMed databases until 10 February 2023. An assessment of study quality was performed using the AMSTAR 2 tool. Differences in the PI, GI, and BOP in the short- and medium-term follow-ups, in the PPD in long-term follow-up, and the gingival recessions in the short-term follow-up were found between subjects with clear aligners and fixed appliances, revealing a slight tendency for clear aligners to be associated with healthier periodontal conditions. However, even if statistically significant, such differences would be negligible in a clinical environment. Therefore, the impact of orthodontic treatment with clear aligners and fixed appliances on periodontal health status should be considered comparable.

The Predictability of Transverse Changes in Patients Treated with Clear Aligners.

Arch expansion might be used to correct buccal corridors, improve smile aesthetics, resolve dental cross bite, and gain space to resolve crowding. In clear aligner treatment, the predictability of the expansion is still unclear. The purpose of this study was to evaluate the predictability of dentoalveolar expansion and molar inclination with clear aligners. In the study, 30 adult patients (27 ± 6.1 years old) treated with clear aligners were selected (treatment time: 8.8 ± 2.2 months). The upper and lower arch transverse diameters were measured for canines, first and second premolars, and first molars on two different sides (gingival margins and cusp tips); moreover, molar inclination was measured. A paired t-test and Wilcoxon test were used to compare prescription (planned movement) and achieved movement. In all cases, except for molar inclination, a statistically significant difference was found between achieved movement and prescription (p < 0.05). Our findings showed a total accuracy of 64% for the lower arch, 67% at the cusp level, and 59% at the gingival level, with a total accuracy of 67% for the upper arch, 71% at the cusp level, and 60% at the gingival level. The mean accuracy for molar inclination was 40%. Average expansion was greater at cusps of canines than for premolars, and it was lowest for molars. The expansion achieved with aligners is mainly due to the tipping of the crown rather than bodily movement of the tooth. The virtual plan overestimates the expansion of the teeth; thus, it is reasonable to plan an overcorrection when the arches are highly contracted.

Predictability of Maxillary Molar Distalization and Derotation with Clear Aligners: A Prospective Study.

Clear aligners are employed daily for the treatment of Class II malocclusions, when a valid option involves distalization and derotation of the upper first and second molars. Evidence regarding the predictability of these movements is slight, and the treatment outcome that clinicians plan may not be achieved. Therefore, the purpose of this study is to assess the accuracy of distalization and derotation with clear aligners. Geomagic Control X, a 3D quality control software, was used to superimpose digital models of the pre-treatment, post-treatment, and virtual plan (ideal post-treatment) measurements of 16 patients (4 M, 12 F; mean age 25.7 ± 8.8 years). Linear and angular measurement tools were used to calculate the amount of tooth movement prescribed and achieved. Distal displacement of the buccal cusps had an overall accuracy of 69% for the first molar and 75% for the second molar. The accuracy of molar derotation was higher for the first molar (77.5%) than for the second molar (62.7%). The aligners were not able to achieve 100% of the ideal post-treatment result; thus, planning of refinements is often needed. However, clear aligners can be regarded as a valuable option for the distalization of first and second molars.

Clear Aligners Treatment of Class III Subdivision with an Extraction of a Lower Bicuspid.

The aim of this study was to show a case of a Class III subdivision adult patient treated with clear aligners (CA) and the extraction of a lower bicuspid. A 19-year-old male with a class III canine and molar relationship on the right side and a deviation of lower dental midline to the left asked for an aesthetic treatment. He refused orthognathic surgical procedures, so he was offered a camouflage orthodontic treatment with the extraction of lower right first premolar to achieve a canine Class I relationship and to center the lower midline. The treatment was performed with clear aligners and the use of Class III elastics to maintain distal anchorage on the right side during the canine distalization. At the end of the treatment, the occlusal objectives were achieved.

Effect of orthopedic and functional orthodontic treatment in children with obstructive sleep apnea: A systematic review and meta-analysis.

Orthodontic treatment is suggested in growing individuals to correct transverse maxillary deficiency and mandibular retrusion. Since, as a secondary effect, these orthodontic procedures may improve pediatric obstructive sleep apnea (OSA), this systematic review assessed their effects on apnea-hypopnea index (AHI) and oxygen saturation (SaO2). Twenty-five (25) manuscripts were included for qualitative synthesis, 19 were selected for quantitative synthesis. Five interventions were analyzed: rapid maxillary expansion (RME, 15 studies), mandibular advancement (MAA, five studies), myofunctional therapy (MT, four studies), and RME combined with MAA (one study). RME produced a significant AHI reduction and minimum SaO2 increase immediately after active treatment, at six and 12 months from baseline. A significant AHI reduction was also observed six and 12 months after the beginning of MAA treatment. MT showed positive effects, with different protocols. In this systematic review and meta-analysis of data from mainly uncontrolled studies, interceptive orthodontic treatments showed overall favorable effects on respiratory outcomes in pediatric OSA. However, due to the low to very low level of the body evidence, this treatment cannot be suggested as elective for OSA treatment. An orthodontic indication is needed to support this therapy and a careful monitoring is required to ensure positive improvement in OSA parameters.

Class II Malocclusion in Adult Patients: What Are the Effects of the Intermaxillary Elastics with Clear Aligners? A Retrospective Single Center One-Group Longitudinal Study.

Aim: To evaluate the dental effects of the treatment with clear aligners and intermaxillary elastics in adult patients with Class II malocclusion. Material and methods: A sample of 20 Class II patients treated with Invisalign aligners (5 M and 15 F; mean age of 27.6 ± 6.3 years) was included in this single-center one-group longitudinal study. Dental cast and cephalometric records were analyzed before (T0) and after treatment (T1). Data were analyzed with a t-test for paired data (p < 0.05). Results: There was a significant reduction of the Overjet (OVJ= −1.4 ± 0.2; p ≤0.001) and a retroposition of upper incisors (U1-NPo = −1.3 ± 1.7; p < 0.001). Furthermore, distalization of upper molars with an improvement of molar class (U6-PT Vertical = −0.93 ± 0.97; p < 0.001; Molar Relation = −0.75 ± 0.45; p < 0.001) was observed. A good control of the lower and upper incisor inclination was present, highlighted by the non-significant changes in these values (L1-GoGn = −0.12 ± 5.4; p = 0.923; U1-AnsPns = −1.1 ± 8.1; p = 0.551). In the lower arch, an increase in the intermolar diameter (0.6 ± 1.0; p = 0.01) was present. Finally, there were no statistically significant changes in all the skeletal variables (ANPg = 0.005 ± 0.687; p = 0.974; SN/MP = −0.47 ± 1.9; p = 0.298). Conclusions: Treatment with Invisalign aligners shows a reduction of the Overjet, a retroposition of the upper incisors, good control of the lower incisors, and an improvement of the molar relationship.

Effectiveness of surgical procedures in the acceleration of orthodontic tooth movement: Findings from systematic reviews and meta-analyses.

The current overview aimed to summarise the findings provided by systematic reviews (SRs) on the effect of surgical procedures in the acceleration of tooth movement and to assess the methodological quality of the included SRs. Three electronic databases have been explored. SRs addressing the effects of surgical procedures on the acceleration of tooth movement were included. The methodological quality of the included SRs was assessed using the updated version of "A Measurement Tool to Assess Systematic Review" (AMSTAR-2). Twenty-eight (28) SRs were included. The methodological quality of the included reviews ranged between critically low (6 studies) and high (12 studies). The most common critical weakness in the included reviews was the absence of clearly a-prior established review methods and any significant deviations from the protocol. The most studied surgical procedure was corticotomy, followed by micro-osteoperforation, piezocision and periodontally accelerated osteogenic orthodontics. The majority of the included SRs supported short-term favourable effects of corticotomy on treatment time and tooth movement rate, in the short-term. However, the authors of the included SRs reported that results were based on weak quality evidence. Conflicting results arise from the existent SRs with regards to the effectiveness of piezocision and micro-osteoperforation. Few SRs summarised complications and side effects of surgical techniques, supporting absence of loss of tooth vitality, periodontal problems, or severe root resorption. The current overview of SRs highlighted the need of high quality SRs comparing different surgical approaches for tooth movement acceleration though network meta-analysis, in order to determine the most efficient instrument for orthodontic movement acceleration.

Evaluation of Tooth Movement Accuracy with Aligners: A Prospective Study.

Background. Clear aligners treatment (CAT) is a common solution in orthodontics to treat both simple and complex malocclusions. This study aimed to evaluate the predictability of CAT, comparing the virtually planned and the achieved tooth movement at the end of stage 15, which is often the time of first refinement. Methods. Seventeen patients (mean age: 28.3 years) were enrolled in the study. Torque, tip and rotation were analyzed in 238 maxillary teeth on digital models at Pre-treatment (T0), at the end of stage 15 (T15) and at virtually planned stage 15 (T15i). Prescription, Achieved movement and performance values were calculated to compare the virtually planned and the clinical tooth position. Data were analyzed by means of Student's t test with a level of significance set at p < 0.05. Results. The largest iper-performance was the torque correction of the second molars (+2.3° ± 3.1°), the greatest under-performance was the tip correction of the first molars (−2.3° ± 3.3°), while rotation corrections of all the teeth showed more accurate performance. No significant differences were found between mean Prescription and mean Achieved movement for all the assessed movements (p < 0.05). Conclusions. An accurate evaluation of CAT after the 15th aligner is fundamental in order to individuate the movements that are not matching the digital set-up.

Treatment of mild Class II malocclusion in growing patients with clear aligners versus fixed multibracket therapy: A retrospective study.

OBJECTIVE: To compare the dental and skeletal effects of intermaxillary elastics on the correction of mild Angle's Class II division 1 malocclusion with clear aligner treatment (CA) versus fixed multibracket (FMB) in growing patients. SETTINGS AND SAMPLE POPULATION: The study sample consisted of 49 consecutively patients (mean age ± SD 12.9 ± 1.7 years), 32 females and 17 males referred from the School of Orthodontics of the University of Bratislava Comenius (Slovakia). All patients were treated with a non-extraction orthodontic treatment, 25 with FMB and 24 with CA. METHODS: The cephalometric analysis was performed at the beginning (T0) and the end of the treatment (T1). The t test for unpaired data was carried out to compare cephalometric values at T0 and changes at T1-T0 between the two groups. The level of significance was set as P < .0035. RESULTS: The two groups showed no statistically significant differences (ANPg = -0.1°; P = .762) in the correction of the sagittal intermaxillary relation. The analysis of vertical skeletal changes showed no statistically significant effects on mandibular inclination (SN/MP = 0.1°; P = .840). The two treatments had a statistically significant and clinically relevant difference in controlling the inclination of the lower incisors (L1/GoGn = 4.8°, CAG = -0.5°± 3.9°; FMB = 4.3°± 5.8°; P < .001). CONCLUSIONS: Class II elastics combined with CA and FMB produce a similar correction on sagittal discrepancies in growing patients. CA presented a better control in the proclination of the lower incisors. CA and elastics might be a good alternative in the correction of mild Class II malocclusion in cases where a proclination of lower incisors is unwanted.

Diagnostic accuracy of screening questionnaires for obstructive sleep apnea in children: A systematic review and meta-analysis.

This systematic review and meta-analysis evaluated the diagnostic accuracy of screening questionnaires for pediatric obstructive sleep apnea (OSA). Studies comparing any questionnaire with polysomnography for OSA detection in subjects aged ≤18 y were considered eligible for qualitative analysis. The quality assessment of diagnostic accuracy studies (QUADAS-2) tool was used for bias assessment. Only questionnaires adopted by at least four studies using the currently accepted diagnostic threshold of apnea-hypopnea index (AHI) ≥1 were included for further selective quantitative analyses. A bivariate meta-analysis was performed to calculate sensitivity, specificity, positive and negative likelihood ratios, diagnostic odds ratio; summary receiver operator characteristic curves were constructed. 37 studies (20 questionnaires) were eligible for qualitative analysis; none were considered of low quality. Among these articles, 13 studies and two questionnaires (sleep-related breathing disorder scale of the pediatric sleep questionnaire (SRBD-PSQ) and OSA-18) satisfied the criteria for quantitative synthesis. SRBD-PSQ had higher sensitivity (0.76) than OSA-18 (0.56), while OSA-18 exhibited higher specificity (0.73) than SRBD-PSQ (0.43). SRBD-PSQ performed well and was the most sensitive screening questionnaire using the diagnostic threshold of AHI ≥1 for pediatric OSA. However, further well-designed studies are still required to assess the role of SRBD-PSQ in real-world clinical populations.

Cephalometric effects of Pushing Splints 3 compared with rapid maxillary expansion and facemask therapy in Class III malocclusion children: a randomized controlled trial.

BACKGROUND: Pushing Splints 3 (PS3) device was recently introduced for the treatment of Class III malocclusion in children. OBJECTIVES: To assess the effect on the sagittal maxillary position (SNA, primary outcome) of PS3 therapy compared with rapid maxillary expansion and facemask therapy (RME/FM) and to compare skeletal and dento-alveolar effects in growing Class III patients. TRIAL DESIGN: This trial was a single-centre randomized controlled trial with two groups randomly allocated in a 1:1 ratio of equal size by sealed-envelope randomization, conducted at the Dentistry Unit of Bambino Gesù Children's Hospital, IRCCS (Rome, Italy). METHODS: A total of 48 patients with Class III malocclusion were included in the study and randomly allocated to the two groups: PS3 therapy and RME/FM therapy. Only the RME/FM group underwent palatal expansion, and both groups were instructed to wear the appliances 14 hours/day. Pre- (T0) and post-treatment (T1) cephalograms were taken. An independent sample t-test and regression analysis were used to analyse the data (P value <0.05). Researchers involved in statistics and tracings were blinded to the treatment allocation. RESULTS: A total of 42 patients (21 for each group) completed the study. The maxillary sagittal position improved similarly in both groups (SNA = 0.4°; P = 0.547). A statistically significant decrease of SNPg angle (-1.6°; P < 0.001) and increase of ANPg angle (1.4°; P = 0.018) were found in the RME/FM group compared with PS3 group. CoGoMe angle significantly decreased in RME/FM group compared with PS3 group (-1.7°; P = 0.042). The regression analysis showed an association between SN/MP angle at T0 and the differences between T1 and T0 of SNPg (B = 0.13; P = 0.005) and SN/MP (B = -0.19; P = 0.034). Only three patients (PS3 = 2; RME/FM = 1) had breakages of the devices. LIMITATIONS: Results are limited to short-term effects. CONCLUSION: RME/FM therapy and PS3 are both effective therapies for the early correction of Class III malocclusion. The PS3 controlled better mandibular divergency reducing the clockwise rotation in patients with higher mandibular inclination. REGISTRATION: This study was not registered in a clinical trial registry.

Impact of Magnetic Stimulation on Periodontal Ligament Stem Cells.

The aim of this study was to evaluate the effect of a time-dependent magnetic field on the biological performance of periodontal ligament stem cells (PDLSCs). A Western blot analysis and Alamar Blue assay were performed to investigate the proliferative capacity of magnetically stimulated PDLSCs (PDLSCs MAG) through the study of the MAPK cascade (p-ERK1/2). The observation of ALP levels allowed the evaluation of the effect of the magnetic field on osteogenic differentiation. Metabolomics data, such as oxygen consumption rate (OCR), extracellular acidification rate (ECAR) and ATP production provided an overview of the PDLSCs MAG metabolic state. Moreover, the mitochondrial state was investigated through confocal laser scanning microscopy. Results showed a good viability for PDLSCs MAG. Magnetic stimulation can activate the ERK phosphorylation more than the FGF factor alone by promoting a better cell proliferation. Osteogenic differentiation was more effectively induced by magnetic stimulation. The metabolic panel indicated significant changes in the mitochondrial cellular respiration of PDLSCs MAG. The results suggested that periodontal ligament stem cells (PDLSCs) can respond to biophysical stimuli such as a time-dependent magnetic field, which is able to induce changes in cell proliferation and differentiation. Moreover, the magnetic stimulation also produced an effect on the cell metabolic profile. Therefore, the current study demonstrated that a time-dependent magnetic stimulation may improve the regenerative properties of PDLSCs.

Evaluation of mandibular changes after rapid maxillary expansion: a CBCT study in youngsters with unilateral posterior crossbite using a surface-to-surface matching technique.

OBJECTIVES: The purpose of this study was to evaluate mandibular asymmetry in youngsters with posterior unilateral crossbite (PUXB), through cone-beam computed tomography and reverse engineering technique, before and after rapid maxillary expansion (RME) treatment. MATERIALS AND METHODS: Forty cone-beam computed tomography (CBCT) images were obtained from all patients at two time points, namely T0 acquired before the placement of a Hyrax expander and T1 after appliance removal. The CBCT scans were segmented and volume rendered into a surface there-dimensional (3D) mesh model. Thereafter, mandibular models were digitally registered by using a "best-fit" algorithm. Surface and volumetric changes, between T0 and T1, were compared by using Student's t tests. RESULTS: A slight increase of 0.45 cm3 of the total mandibular volume was found at T1 when compared with T0 (p < 0.001). The mandibular hemi-volume on the crossbite side (CB) was slightly smaller than the non-crossbite side both at T0 and T1. However, the mean differences of hemi-volume from the CB (crossbite) and non-CB side between T0 and T1 show a decrease of 0.26 cm3 (p < 0.001). Findings for the surface-to-surface deviation analysis demonstrated a fine percentage of matching at T0 which slightly improved at T1 (p < 0.001). CONCLUSIONS: Youngsters affected by PUXB showed a very slight and not statistically significant volumetric and morphological asymmetry between CB side and non-CB side at T0. However, the change in mean differences of 0.26 cm cannot be considered clinically relevant. CLINICAL RELEVANCE: Mandibles in young PUXB patients exhibit only a very mild mandibular asymmetry. Although the statistically significant mean change found right after RME removal cannot be considered clinically relevant, a more consistent sample and a longer follow-up could be of interest in explaining the short-term findings.