The Role of Cerium Valence in the Conversion Temperature of H2Ti3O7 Nanoribbons to TiO2-B and Anatase Nanoribbons, and Further to Rutile.

CeO2-TiO2 is an important mixed oxide due to its catalytic properties, particularly in heterogeneous photocatalysis. This study presents a straightforward method to obtain 1D TiO2 nanostructures decorated with CeO2 nanoparticles at the surface. As the precursor, we used H2Ti3O7 nanoribbons prepared from sodium titanate nanoribbons by ion exchange. Two cerium sources with an oxidation state of +3 and +4 were used to obtain mixed oxides. HAADF-STEM mapping of the Ce4+-modified nanoribbons revealed a thin continuous layer at the surface of the H2Ti3O7 nanoribbons, while Ce3+ cerium ions intercalated partially between the titanate layers. The phase composition and morphology changes were monitored during calcination between 620 °C and 960 °C. Thermal treatment led to the formation of CeO2 nanoparticles on the surface of the TiO2 nanoribbons, whose size increased with the calcination temperature. The use of Ce4+ raised the temperature required for converting H2Ti3O7 to TiO2-B by approximately 200 °C, and the temperature for the formation of anatase. For the Ce3+ batch, the presence of cerium inhibited the conversion to rutile. Analysis of cerium oxidation states revealed the existence of both +4 and +3 in all calcined samples, regardless of the initial cerium oxidation state.

Hydrogen and helium trapping in hcp beryllium.

Even though hydrogen-metal surface interactions play an important role in energy technologies and metal corrosion, a thorough understanding of these interactions at the nanoscale remains elusive due to obstructive detection limits in instrumentation and the volatility of pure hydrogen. In the present paper we use analytical spectroscopy in TEM to show that hydrogen adsorbs directly at the (0001) surfaces of hexagonal helium bubbles within neutron irradiated beryllium. In addition to hydrogen, we also found Al, Si and Mg at the beryllium-bubble interfaces. The strong attraction of these elements to (0001) surfaces is underlined with ab-initio calculations. In situ TEM heating experiments reveal that hydrogen can desorb from the bubble walls at T ≥ 400 °C if the helium content is reduced by opening the bubbles. Based on our results we suggest the formation of a complex hydride consisting of up to five elements with a remarkably high decomposition temperature. These results therefore promise novel insights into metal-hydrogen interaction behavior and are invaluable for the safety of future fusion power plants.

Towards a Greener and Scalable Synthesis of Na2Ti6O13 Nanorods and Their Application as Anodes in Batteries for Grid-Level Energy Storage.

Grid applications require high power density (for frequency regulation, load leveling, and renewable energy integration), achievable by combining multiple batteries in a system without strict high capacity requirements. For these applications however, safety, cost efficiency, and the lifespan of electrode materials are crucial. Titanates, safe and longevous anode materials providing much lower energy density than graphite, are excellent candidates for this application. The innovative molten salt synthesis approach proposed in this work provides exceptionally pure Na2Ti6O13 nanorods generated at 900-1100 °C in a yield ≥80 wt%. It is fast, cost-efficient, and suitable for industrial upscaling. Electrochemical tests reveal stable performance providing capacities of ≈100 mA h g-1 (Li) and 40 mA h g-1 (Na). Increasing the synthesis temperature to 1100 °C leads to a capacity decrease, most likely resulting from 1) the morphology/volume change with the synthesis temperature and 2) distortion of the Na2Ti6O13 tunnel structure indicated by electron energy-loss and Raman spectroscopy. The suitability of pristine Na2Ti6O13 as the anode for grid-level energy storage systems has been proven a priori, without any performance-boosting treatment, indicating considerable application potential especially due to the high yield and low cost of the synthesis route.

Experimental and theoretical investigation of the chemical exfoliation of Cr-based MAX phase particles.

Two-dimensional carbides/nitrides, typically called MXenes, are an emerging member of the ever-growing family of two-dimensional materials. The prediction of a ferromagnetic groundstate in chromium-containing MXenes has triggered growing interest in their chemical exfoliation from Cr-based MAX phases. However, the exfoliation poses serious difficulties using standard etching agents such as hydrofluoric acid (HF). Here, we investigate the exfoliability of Cr2GaC particles by chemical etching with aqueous HF both experimentally and theoretically. Structural and microstructural analyses show that the Cr2GaC particles decompose into chromium carbide and oxide without the formation of a Cr-based MXene. A thermodynamic analysis based on ab initio electronic structure calculations reveals that the exfoliation of Cr-based MXene from Cr2GaC by HF-etching is inhibited by more favorable competing reactions. This result confirms the experimental finding and suggests that HF is an unsuitable etching agent for a successful exfoliation of Cr2GaC.

Shape-Selective Electroless Plating within Expanding Template Pores: Etching-Assisted Deposition of Spiky Nickel Nanotube Networks.

Nano-objects are favored structures for applications such as catalysis and sensing. Although they already provide a large surface-to-volume ratio, this ratio can be further increased by shape-selective plating of the nanostructure surfaces. This process combines the conformity of autocatalytic deposition with the defined nucleation and growth characteristics of colloidal nanoparticle syntheses. However, many aspects of such reactions are still not fully understood. In this study, we investigate in detail the growth of spiky nickel nanotubes in polycarbonate template membranes. One distinctive feature of our synthesis is the simultaneous growth of nanospikes on both the inside and outside of nanotubes while the tubes are still embedded in the polymer. This is achieved by combining the plating process with locally enhanced in situ etching of the poylmer template, for which we propose a theory. Electron microscopy investigations reveal twinning defects as the driving force for the growth of crystalline nanospikes. Deposit crystallinity is ensured by the reducing agent hydrazine. Iminodiacetic acid is not only used as a complexing agent during synthesis but apparently also acts as a capping agent and limits random nucleation on the spike facets. Finally, we apply our synthesis to templates with interconnected pores to obtain free-standing spiky nickel nanotube networks, demonstrating its ability to homogeneously coat substrates with extended inner surfaces and to operate in nanoscale confinement.