Cellulose acetate scaffold coated with a hydroxyapatite/graphene oxide nanocomposite for application in tissue engineering.

The objective of this study was to synthesize and characterize porous Cellulose Acetate (CA) scaffolds using the electrospinning technique and functionalize the surface of the scaffolds obtained through the dip-coating method with a Hydroxyapatite (HA) nanocomposite and varying concentrations of graphene oxide (GO) for application in tissue engineering regeneration techniques. The scaffolds were divided into four distinct groups based on their composition: 1) CA scaffolds; 2) CAHAC scaffolds; 3) CAHAGOC 1.0% scaffolds; 4) CAHAGOC 1.5% scaffolds. Scaffold analyses were conducted using X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Raman Spectroscopy, Scanning Electron Microscopy with Energy Dispersive Spectroscopy (SEM/EDS), and in vitro cell viability assays (WST). For the biological test analysis, Variance (two-way) was used, followed by Tukey's post-test (α = 0.05). The XRD results revealed the predominant presence of CaP phases in the CAHAC, CAHAGOC 1.0%, and CAHAGOC 1.5% groups, emphasizing the presence of HA in the scaffolds. FTIR demonstrated characteristics of cellulose and PO4 bands in the groups containing HA, confirming the presence of CaP in the synthesized materials, as also indicated by XRD. Raman spectroscopy showed the presence of D and G bands, consistent with GO, confirming the successful incorporation of the HAGO nanocomposite into the scaffolds. The micrographs displayed overlapping electrospun fibers, forming the three-dimensional structure in the produced scaffolds. It was possible to observe hydroxyapatite crystals filling some of these pores, creating a suitable structure for cell adhesion, proliferation, and nutrition, as corroborated by the results of in vitro tests. All scaffolds exhibited high cell viability, with significant cell proliferation. Even after 48 h, there was a slight reduction in the number of cells, but a noteworthy increase in cell proliferation was evident in the CAHAGOC 1.5% group after 48 h (p < 0.05). In conclusion, it can be affirmed that the produced scaffolds demonstrated physical and biological characteristics and properties capable of promoting cell adhesion and proliferation. Therefore, they represent significant potential for application in tissue engineering, offering a new perspective regarding techniques and biomaterials applied in regenerative therapies.

A Minimally Invasive Surgical Procedure to Harvest Palate Periosteum as a Source of Mesenchymal Stromal/Stem Cells for Bone Tissue Engineering.

The aim of this study is to validate a minimally invasive surgical procedure to harvest palate periosteum as a source of tissue for mesenchymal stromal/stem cells. We performed a standardized procedure to harvest the palate periosteum in ten subjects, which consisted of a 3 mm disposable punch and a Molt periosteal elevator to harvest a small full-thickness fragment of soft tissue at the hard palate area, between the upper bicuspids, 3 to 4 mm apical to the cement enamel junction. The one-third inner portion was fragmented, and following standard cell culture procedures, the adherent cells were cultured for three passages, after obtaining 70-90% confluence. Cell morphology analysis, flow cytometry analysis, and viability and osteogenic differentiation assays were performed. In all 10 cases, uneventful healing was observed, with no need for analgesic intake. The evaluation of cell morphology showed elongated spindle-shaped cells distributed in woven patterns. A high viability range was verified as well as an immunophenotype compatible with mesenchymal stem cell lineage. The differentiation assay showed the potential of the cells to differentiate into the osteogenic lineage. These results demonstrate that the minimally invasive proposed surgical technique is capable of supplying enough periosteum source tissue for stem cell culture and bone tissue engineering.

Association of chest computed tomography severity score at ICU admission and respiratory outcomes in critically ill COVID-19 patients.

OBJECTIVE: To evaluate the association of a validated chest computed tomography (Chest-CT) severity score in COVID-19 patients with their respiratory outcome in the Intensive Care Unit. METHODS: A single-center, prospective study evaluated patients with positive RT-PCR for COVID-19, who underwent Chest-CT and had a final COVID-19 clinical diagnosis needing invasive mechanical ventilation in the ICU. The admission chest-CT was evaluated according to a validated Chest-CT Severity Score in COVID-19 (Chest-CTSS) divided into low ≤50% (<14 points) and >50% high (≥14 points) lung parenchyma involvement. The association between the initial score and their pulmonary clinical outcomes was evaluated. RESULTS: 121 patients were clustered into the > 50% lung involvement group and 105 patients into the ≤ 50% lung involvement group. Patients ≤ 50% lung involvement (<14 points) group presented lower PEEP levels and FiO2 values, respectively GEE P = 0.09 and P = 0.04. The adjusted COX model found higher hazard to stay longer on invasive mechanical ventilation HR: 1.69, 95% CI, 1.02-2.80, P = 0.042 and the adjusted logistic regression model showed increased risk ventilator-associated pneumonia OR = 1.85 95% CI 1.01-3.39 for COVID-19 patients with > 50% lung involvement (≥14 points) on Chest-CT at ICU admission. CONCLUSION: COVID-19 patients with >50% lung involvement on Chest-CT admission presented higher chances to stay longer on invasive mechanical ventilation and more chances to developed ventilator-associated pneumonia.

Biomineralization of calcium phosphates functionalized with hydroxyapatite-binding peptide.

Functionalization of calcium phosphates with biomimetic peptides is a promising strategy to increase cellular response for bone tissue repair. In this work, biphasic calcium phosphate pellets were functionalized with the hydroxyapatite-binding peptide pVTK by dropping a suspension of the peptide on the pellet surface. The bioactivity tests were performed in vitro by using McCoy culture medium. Cytotoxicity tests were also performed to assess cell viability. The material was characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy with field emission gun (FEG-SEM). The results showed that functionalization with the biomimetic peptide was most effective in inducing precipitation of bone-like apatite on the pellets surface, when compared to the control groups (two positive control groups and one negative control group). Cytotoxicity tests showed that all samples are biocompatible but the pellets with peptide showed the highest values of cell viability.

In Vivo Evaluation of Collagen and Chitosan Scaffold, Associated or Not with Stem Cells, in Bone Repair.

Natural polymers are increasingly being used in tissue engineering due to their ability to mimic the extracellular matrix and to act as a scaffold for cell growth, as well as their possible combination with other osteogenic factors, such as mesenchymal stem cells (MSCs) derived from dental pulp, in an attempt to enhance bone regeneration during the healing of a bone defect. Therefore, the aim of this study was to analyze the repair of mandibular defects filled with a new collagen/chitosan scaffold, seeded or not with MSCs derived from dental pulp. Twenty-eight rats were submitted to surgery for creation of a defect in the right mandibular ramus and divided into the following groups: G1 (control group; mandibular defect with clot); G2 (defect filled with dental pulp mesenchymal stem cells-DPSCs); G3 (defect filled with collagen/chitosan scaffold); and G4 (collagen/chitosan scaffold seeded with DPSCs). The analysis of the scaffold microstructure showed a homogenous material with an adequate percentage of porosity. Macroscopic and radiological examination of the defect area after 6 weeks post-surgery revealed the absence of complete repair, as well as absence of signs of infection, which could indicate rejection of the implants. Histomorphometric analysis of the mandibular defect area showed that bone formation occurred in a centripetal fashion, starting from the borders and progressing towards the center of the defect in all groups. Lower bone formation was observed in G1 when compared to the other groups and G2 exhibited greater osteoregenerative capacity, followed by G4 and G3. In conclusion, the scaffold used showed osteoconductivity, no foreign body reaction, malleability and ease of manipulation, but did not obtain promising results for association with DPSCs.

Chitosan/Xanthan/Hydroxyapatite-graphene oxide porous scaffold associated with mesenchymal stem cells for dentin-pulp complex regeneration.

The aim of this paper was to synthesize and characterize polymeric scaffolds of Chitosan/Xanthan/Hydroxyapatite-Graphene Oxide nanocomposite associated with mesenchymal stem cells for regenerative dentistry application. The chitosan-xanthan gum (CX) complex was associated with Hydroxyapatite-Graphene Oxide (HA-GO) nanocomposite with different Graphene Oxides (GO) concentration (0.5 wt%; 1.0 wt%; 1.5 wt%). The scaffolds characterizations were performed by X-ray diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Raman spectroscopy, thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and contact angle. The mechanical properties were assessed by compressive strength. The in vitro bioactivity and the in vitro cytotoxicity test (MTT test) were analyzed as well. The data was submitted to the Normality and Homogeneity tests. In vitro Indirect Cytotoxicity assay data was statistically analyzed by ANOVA two-way, followed by Tukey's test (α = 0.05). Compressive strength and contact angle data were statistically analyzed by one-way ANOVA, followed by Tukey's test (α = 0.05). XRD showed the presence of Hydroxyapatite (HA) peaks in the structures CXHA, CXHAGO 0.5%,1.0% and 1.5%. FT-IR showed amino and carboxylic bands characteristic of CX. Raman spectroscopy analysis evidenced a high quality of the GO. In the TGA it was observed the mass loss associated with the CX degradation by depolymerization. SEM analysis showed pores in the scaffolds, in addition to HA incorporated and adhered to the polymer. Contact angle test showed that scaffolds have a hydrophilic characteristic, with the CX group the highest contact angle and CXHA the lowest (p < 0.05). 1.0 wt% GO significantly increased the compressive strength compared to other compositions. In the bioactivity test, the apatite crystals precipitation on the scaffold surface was observed. MTT test showed high cell viability in CXHAGO 1.0% and CXHAGO 1.5% scaffold. CXHAGO scaffolds are promising for regenerative dentistry application because they have morphological characteristics, mechanical and biological properties favorable for the regeneration process.

Cell-Friendly Chitosan-Xanthan Gum Membranes Incorporating Hydroxyapatite Designed for Periodontal Tissue Regeneration.

In this work, a simple method was proposed to produce dense composite polysaccharide-based membranes to be used for guided tissue and guided bone regeneration. The mucoadhesive polysaccharides chitosan (C) and xanthan gum (X) were used to produce polyelectrolyte-based complex membranes. Hydroxyapatite (HA) was added to the formulation as a potential drug carrier, in C:X:HA mass proportions equal to 1:1:0.4, 1:1:2, and 1:1:10, and also to improve membranes bioactivity and biomimetic properties. FTIR analysis indicated successful incorporation of HA in the membranes and XRD analysis showed that no changes in the HA crystalline structure were observed after incorporation. The residual mass evaluated by TGA was higher for the formulation produced at the proportion 1:1:10. The membranes produced showed asymmetrical surfaces, with distinct roughness. Increasing the HA concentration increased the surface roughness. Greater in vitro proliferation of dental pulp mesenchymal stem cells was observed on the surface of the membrane with 1:1:10 C:X:HA proportion. However, the 1:1:2 formulation showed the most adequate balance of mechanical and biological properties. These results suggest that adding HA to the membranes can influence mechanical parameters as well as cell adhesion and proliferation, supporting the potential application of these materials in regenerative techniques and the treatment of periodontal lesions.

Chitosan/Xanthan membrane containing hydroxyapatite/Graphene oxide nanocomposite for guided bone regeneration.

OBJECTIVE: To develop a chitosan-xanthan (CX) membrane associated with Hydroxyapatite (HA) and different concentrations of graphene oxide (GO). METHODOLOGY: The CX complex was associated with the hydroxyapatite-graphene oxide (HAGO) nanocomposite in different concentrations. The experimental groups were:1) CX; 2) Chitosan-Xanthan/Hydroxyapatite (CXHA); 3) Chitosan-Xanthan/Hydroxyapatite-Graphene Oxide 0.5% (CXHAGO 0.5%); 4) CXHAGO 1.0%; 5) CXHAGO 1.5%. The membranes characterizations were performed by X-ray diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Raman spectroscopy, Scanning Electron Microscopy (SEM), Contact angle, Tensile Strength, in vitro Bioactivity and the in vitro Cell viability (MTT test). The data was submitted to the Normality and Homogeneity tests. In vitro Indirect Cytotoxicity assay data was statistically analyzed by two-way ANOVA and Tukey's test (α = 0.05). Tensile Strength and Contact Angle data were statistically analyzed by one-way ANOVA followed by Tukey's test (α = 0.05). RESULTS: XRD, FTIR and Raman spectroscopy confirmed the characteristic bands of the CX polymeric complex, the phosphate bands related to HA, and the presence of GO. SEM images demonstrated the non-porous and homogeneous surface of membranes. The contact angle test showed the hydrophilic characteristic of all membranes (p > 0.05). CX showed tensile strength significantly higher than other membranes. The apatite deposition was observed in all membranes after performing the bioactivity test. The cell viability of CXHAGO 1.0% and CXHAGO 1.5% was significantly higher than CX. CONCLUSION: The addition of HAGO reduced the mechanical strength of membranes, but improved its cell viability. It demonstrated the potential of CXHAGO membranes to be used in guided bone regeneration therapies.

AMAZONIA CAMTRAP: A data set of mammal, bird, and reptile species recorded with camera traps in the Amazon forest.

The Amazon forest has the highest biodiversity on Earth. However, information on Amazonian vertebrate diversity is still deficient and scattered across the published, peer-reviewed, and gray literature and in unpublished raw data. Camera traps are an effective non-invasive method of surveying vertebrates, applicable to different scales of time and space. In this study, we organized and standardized camera trap records from different Amazon regions to compile the most extensive data set of inventories of mammal, bird, and reptile species ever assembled for the area. The complete data set comprises 154,123 records of 317 species (185 birds, 119 mammals, and 13 reptiles) gathered from surveys from the Amazonian portion of eight countries (Brazil, Bolivia, Colombia, Ecuador, French Guiana, Peru, Suriname, and Venezuela). The most frequently recorded species per taxa were: mammals: Cuniculus paca (11,907 records); birds: Pauxi tuberosa (3713 records); and reptiles: Tupinambis teguixin (716 records). The information detailed in this data paper opens up opportunities for new ecological studies at different spatial and temporal scales, allowing for a more accurate evaluation of the effects of habitat loss, fragmentation, climate change, and other human-mediated defaunation processes in one of the most important and threatened tropical environments in the world. The data set is not copyright restricted; please cite this data paper when using its data in publications and we also request that researchers and educators inform us of how they are using these data.

Rintala Flap and Posterior Perichondrial Cutaneous Graft: A Combined Approach for Nasal Tip Reconstruction.

Nasal tip reconstruction requires a meticulous approach due to the complexity of the nasal anatomy and its aesthetic importance. Many procedures have been described to restore this aesthetic unit, including the paramedian forehead flap, which is one of the workhorse flaps. However, despite excellent final outcomes, this procedure may be refused by patients, due to its temporary conspicuous appearance possibly associated with serious psychological implications, and the need of multiple interventions. We aimed to present an approach combining the Rintala flap and the posterior perichondrial cutaneous graft as a valuable alternative to treat large nasal tip defects.

Increased Body Fat and Organic Acid Anions Production Are Associated with Larger Kidney Size in ADPKD.

Background and Objectives: A high body mass index (BMI) is associated with the progression of autosomal dominant polycystic kidney disease (ADPKD). However, body fat (BF), which is another adiposity marker, has not yet been studied. Excessive weight may promote elevation in the endogenous synthesis of organic acid (OA) anions. Accordingly, we aimed to investigate the possible association of the aforementioned markers with kidney volume and renal function in patients with ADPKD. Materials and Methods: We conducted a retrospective cohort study of adult ADPKD outpatients involving clinical, serum, and urinary laboratorial data and body composition assessments retrieved from their medical records. BF was estimated by skinfold thickness (mm) on the non-dominant arm and was considered as normal or high for each sex. Total kidney volume (TKV) and height-adjusted volume (htTKV) were measured by magnetic resonance imaging. The annual estimated glomerular filtration rate (eGFR) slope was analyzed during a median follow-up time of 6 (5.0-7.0) years to calculate rapid progression (decline in renal function ≥2.5 mL/min/year over 5 years). Results: A total of 104 patients were included (41.9 ± 11.9 years old, 38.5% men), with 62.5% of the patients classified as high BF. The High BF group presented higher levels of OA, glycosylated hemoglobin (HbA1c), C-reactive protein (CRP), 24 h urinary sodium (UNa), and htTKV, and lower eGFR than those with a normal BF. In the multivariate linear regression, the associated variables with TKV were high BF, OA and BMI (std. ß 0.47, p < 0.05; std. ß 0.36, p = 0.001; std. ß 0.25, p = 0.01, respectively). In the binary logistic regression, when adjusted for potential confounders, UNa was the only parameter associated with an increased risk of eGFR decline ≥2.5 mL/min/year (OR 1.02, 95% CI 1.01-1.03, p = 0.02). Conclusions: Increased body fat and endogenous production of organic acid anions are associated with larger kidney size in ADPKD but not with a decline in renal function.

Reduced Periodontal Support for Lower Central Incisor - A 3D Finite Element Analysis of Compressive Stress in the Periodontium.

BACKGROUND: The aim of this study was to assess the stress concentration in simulated periodontal alveolar bone containing healthy teeth with and without attachment loss. METHODS: Six 3-D models of a lower central incisor were created simulating the teeth structure, cancellous and cortical bone and periodontal ligament. Each model presented a 1mm increasing distance between cement-enamel junction (CEJ) and alveolar bone crest (ABC) (1 to 6mm). A 100N, 45-degree load was applied to the buccal face of the lower central incisor. The effects of Minimum Principal Stress (MPS) on lamina dura (LD) and ABC were analyzed. RESULTS: The results showed an increase of MPS in the surrounding bone (ABC and LD) due to periodontal attachment loss. The 6mm attachment loss model showed the highest (p less than 0.001) magnitude in MPS. Each millimeter increase in CEJ-ABC distance generated a 12% pattern of attachment loss and an increase at least of 65.7% for ABC and 33.6% for LD. CONCLUSION: Under simulated conditions, attachment loss increases stress concentration in the surrounding bone suggesting a partly explanation regarding bone resorption risk for teeth with periodontal attachment loss.

Influence of surface sealant and erosive challenge on the color change of composite resin subjected to artificial staining.

The aim of this study was to evaluate the influence of surface sealant and erosive challenge on the color change of composite resin after artificial staining with coffee. Forty-eight composite specimens (8 × 1 mm) were prepared and divided into 4 groups (n = 12) based on the timing of sealant application (immediate vs delayed) and exposure to acid (erosive challenge vs no challenge). The groups were subjected to the procedures in the following order: 1, sealant application, erosive challenge, color measurement, coffee immersion, and color measurement; 2, sealant application, color measurement, coffee immersion, and color measurement; 3, erosive challenge, color measurement, sealant application, coffee immersion, and color measurement; and 4, color measurement, sealant application, coffee immersion, and color measurement. In groups 1 and 2, surface sealant was applied immediately after preparation of the specimens. In groups 3 and 4, sealant was applied after the first color measurement. Color was measured with a spectrophotometer using the CIE L*a*b* system. The erosive challenge (groups 1 and 3) was carried out in 0.01M hydrochloric acid, 150 mL/cycle, at room temperature (2-minute immersions 4 times a day for 5 days). After all specimens were immersed in coffee for 14 days, new color measurements were performed. For total color change (∆E*), groups 1 (21.01) and 2 (23.10) presented lower values than groups 3 (27.76) and 4 (26.57). For luminosity (∆L*), the opposite occurred (groups: 1, -16.84; 2, -17.72; 3, -22.62; and 4, -21.22). For ∆a* and ∆b*, the only statistically significant difference was the group 1 ∆b* value, which was the lowest among all groups. The opacity remained stable in all groups. The results suggest that resin luminosity decreases and color variation increases when surface sealant is applied after erosive cycling and storage.

Effect of the restorative technique on load-bearing capacity, cusp deflection, and stress distribution of endodontically-treated premolars with MOD restoration.

OBJECTIVES: To evaluate the influence of the restorative technique on the mechanical response of endodontically-treated upper premolars with mesio-occluso-distal (MOD) cavity. MATERIALS AND METHODS: Forty-eight premolars received MOD preparation (4 groups, n = 12) with different restorative techniques: glass ionomer cement + composite resin (the GIC group), a metallic post + composite resin (the MP group), a fiberglass post + composite resin (the FGP group), or no endodontic treatment + restoration with composite resin (the CR group). Cusp strain and load-bearing capacity were evaluated. One-way analysis of variance and the Tukey test were used with α = 5%. Finite element analysis (FEA) was used to calculate displacement and tensile stress for the teeth and restorations. RESULTS: MP showed the highest cusp (p = 0.027) deflection (24.28 ± 5.09 µm/µm), followed by FGP (20.61 ± 5.05 µm/µm), CR (17.72 ± 6.32 µm/µm), and GIC (17.62 ± 7.00 µm/µm). For load-bearing, CR (38.89 ± 3.24 N) showed the highest, followed by GIC (37.51 ± 6.69 N), FGP (29.80 ± 10.03 N), and MP (18.41 ± 4.15 N) (p = 0.001) value. FEA showed similar behavior in the restorations in all groups, while MP showed the highest stress concentration in the tooth and post. CONCLUSIONS: There is no mechanical advantage in using intraradicular posts for endodontically-treated premolars requiring MOD restoration. Filling the pulp chamber with GIC and restoring the tooth with only CR showed the most promising results for cusp deflection, failure load, and stress distribution.

What has become of the refugia hypothesis to explain biological diversity in Amazonia?

The spatial distribution of biodiversity and related processes is the core of Biogeography. Amazonia is the world's most diverse rainforest and the primary source of diversity to several Neotropical regions. The origins of such diversity continue to be an unresolved question in evolutionary biology. Among many competing hypotheses to explain the evolution of the Amazonian biodiversity, one stands out as the most influential: the refugia hypothesis by Jürgen Haffer. Here, we provide a chronological overview on how the refugia hypothesis evolved over the decades and how the criticism from different fields affected its acceptance. We conclude that the refugia hypothesis alone cannot explain the diversification of the complex Amazonian diversity, and perhaps it was not the most important diversification mechanism. However, the debate provoked by refugia has produced a great amount of knowledge on Amazonian climatic, geological, and evolutionary processes, as well as on species distributions, movements, and history.

Spatial patterns of medium and large size mammal assemblages in várzea and terra firme forests, Central Amazonia, Brazil.

Várzea forests account for 17% of the Amazon basin and endure an annual inundation that can reach 14 m deep during 6-8 months. This flood pulse in combination with topography directly influences the várzea vegetation cover. Assemblages of several taxa differ significantly between unflooded terra firme and flooded várzea forests, but little is known about the distribution of medium and large sized terrestrial mammals in várzea habitats. Therefore, our goal was to understand how those habitats influence mammalian species distribution during the dry season. Specifically, we: (1) compared the species composition between a terra firme (Amanã Sustainable Development Reserve) and a várzea forest (Mamirauá Sustainable Development Reserve); and (2) tested the influence of the várzea habitat classes on the number of records, occurrence and species composition of mammalian assemblages. The sampling design in each reserve consisted of 50 baited camera trap stations, with an overall sampling effort of 5015 camera trap days. We used Non-Metric Multidimension Scaling (NMDS) to compare species composition between terra firme and várzea forests, and used Generalized Linear Models (GLM) to assess how habitat types and a habitat diversity index affect mammal distributions. We recorded 21 medium and large sized mammalian species, including 20 species in terra firme and only six in várzea (3443 records). Flood pulse and isolation in várzea forest drove the dissimilarity between these two forest types. In várzea forest, medium size mammals, in general, avoided habitats associated with long flooding periods, while jaguars (Panthera onca) appeared to prefer aquatic/terrestrial transition zones. Habitats that remain dry for longer periods showed more mammalian occurrence, suggesting that dispersion via soil is important even for semi-arboreal species. This is the first study to evaluate differential use of várzea habitats by terrestrial mammalian assemblages.

Fatigue Failure of External Hexagon Connections on Cemented Implant-Supported Crowns.

PURPOSE: To evaluate the probability of survival and failure modes of different external hexagon connection systems restored with anterior cement-retained single-unit crowns. The postulated null hypothesis was that there would be no differences under accelerated life testing. MATERIALS AND METHODS: Fifty-four external hexagon dental implants (∼4 mm diameter) were used for single cement-retained crown replacement and divided into 3 groups: (3i) Full OSSEOTITE, Biomet 3i (n = 18); (OL) OEX P4, Osseolife Implants (n = 18); and (IL) Unihex, Intra-Lock International (n = 18). Abutments were torqued to the implants, and maxillary central incisor crowns were cemented and subjected to step-stress-accelerated life testing in water. Use-level probability Weibull curves and probability of survival for a mission of 100,000 cycles at 200 N (95% 2-sided confidence intervals) were calculated. Stereo and scanning electron microscopes were used for failure inspection. RESULTS: The beta values for 3i, OL, and IL (1.60, 1.69, and 1.23, respectively) indicated that fatigue accelerated the failure of the 3 groups. Reliability for the 3i and OL (41% and 68%, respectively) was not different between each other, but both were significantly lower than IL group (98%). Abutment screw fracture was the failure mode consistently observed in all groups. CONCLUSION: Because the reliability was significantly different between the 3 groups, our postulated null hypothesis was rejected.

Mg substituted apatite coating from alkali conversion of acidic calcium phosphate.

In this work, two solutions were developed: the first, rich in Ca2+, PO43- ions and the second, rich in Ca2+, PO43- and Mg2+, defined as Mg-modified precursor solution. For each Mg-modified precursor solution, the concentrations of Mg2+ ions were progressively increased by 5%, 10% and 15%wt. The aims of this research were to investigate the influence of magnesium ions substitution in calcium phosphate coatings on titanium surface and to evaluate these coatings by bioactivity assay in McCoy culture medium. The obtained coatings were characterized by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) analysis, and the presence of Mg ions was confirmed by the inductively coupled plasma atomic emission spectroscopy (ICP) analysis. In vitro bioactivity assay in McCoy culture medium showed bioactivity after 14days in incubation for the HA and 10% Mg-monetite coatings. The high chemical stability of Mg-HA coatings was verified by the bioactivity assays, and no bone-like apatite deposition, characteristic of bioactivity, was observed for Mg-HA coatings, for the time period used in this study.

Ocelot (Leopardus pardalis) Density in Central Amazonia.

Ocelots (Leopardus pardalis) are presumed to be the most abundant of the wild cats throughout their distribution range and to play an important role in the dynamics of sympatric small-felid populations. However, ocelot ecological information is limited, particularly for the Amazon. We conducted three camera-trap surveys during three consecutive dry seasons to estimate ocelot density in Amanã Reserve, Central Amazonia, Brazil. We implemented a spatial capture-recapture (SCR) model that shared detection parameters among surveys. A total effort of 7020 camera-trap days resulted in 93 independent ocelot records. The estimate of ocelot density in Amanã Reserve (24.84 ± SE 6.27 ocelots per 100 km2) was lower than at other sites in the Amazon and also lower than that expected from a correlation of density with latitude and rainfall. We also discuss the importance of using common parameters for survey scenarios with low recapture rates. This is the first density estimate for ocelots in the Brazilian Amazon, which is an important stronghold for the species.

Synthesis of piezoelectric and bioactive NaNbO3 from metallic niobium and niobium oxide.

NaNbO3 was synthesized by two different routes, one using metallic niobium powder, and another using niobium oxide (Nb2 O5 ) powder. In both routes an aqueous sodium hydroxide solution was used to hydrothermally treating the powders. In the first approach, the solution concentrations were 3M, 1M, and 0.5M. The second route used solution concentrations of 10M and 12.5M. After the hydrothermal treatments, the powders were heat treated in order to synthesize NaNbO3 . The products were characterized by scanning electron microscopy (SEM) with energy dispersive spectrometry (EDS), and X-ray diffraction (XRD) with Rietveld refinement. The phases were identified by means of X-ray diffraction (XRD) with Rietveld refinement. It was observed that the molar concentrations of the solutions had opposing effects for each route. An antiferroelectric phase was found in both routes. In the niobium metallic route, a ferroelectric phase was also synthesized. This study proves that piezoelectric NaNbO3 can be obtained after alkali treatment of both Nb and Nb2 O5. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 104B: 979-985, 2016.