Preliminary characterization and probabilistic risk assessment of microplastics and potentially toxic elements (PTEs) in garri (cassava flake), a common staple food consumed in West Africa.

Garri from cassava is one of the most consumed foods in West Africa, hence this research was conducted to examine microplastics (MPs) and potentially toxic elements (PTEs) in garri from Nigeria (West Africa) and Japan. This is the first investigation on MPs in garri samples that has been reported in the literature. The study analyzed both packaged and unpackaged vended garri samples using microscopic/spectroscopic and X-ray fluorescence techniques for MPs and PTEs respectively. Microplastic particles in the garri samples ranged from (or were between) 2.00±2.00 - 175.00±25.16 particles/50 with > 90 % as fragments and consisted of polyacrylamide, polyethylene terepthalate, polyvinyl alcohol, high density polyethylene, polyvinyl chloride acrylonitrile, polyethylene chlorinated, polypropylene with silicate mix, polychloroprene and polyethylene chlorosulphonated. The mean concentration of PTEs raged from ND to 0.07 mg/g for Cr and Mn, 0.73 to 5.63 mg/g for Fe, ND to 0.57mg/g for Co, 0.23 to 1.21 mg/g for Ni, 0.15 to 1.53 mg/g for Cu, and 0.12 to 0.63 mg/g for Zn. However, their daily intake was low for both adult and children as with the MPs. The sources of MPs and PTEs were mainly from the garri production processes, atmospheric dusts and during packaging. The non-carcinogenic risk for all samples was low for MPs while in openly vended garri, Ni and Cr in all sample poses carcinogenic risks. There is a need to improve indigenous garri processing techniques to minimize contamination. This research emphasizes the critical necessity to understand the consequences of MPs on human health.

Synthesis of Dense MgB2 Superconductor via In Situ and Ex Situ Spark Plasma Sintering Method.

In this study, high-density magnesium diboride (MgB2) bulk superconductors were synthesized by spark plasma sintering (SPS) under pressure to improve the field dependence of the critical current density (Jc-B) in MgB2 bulk superconductors. We investigated the relationship between sintering conditions (temperature and time) and Jc-B using two methods, ex situ (sintering MgB2 synthesized powder) and in situ (reaction sintering of Mg and B powder), respectively. As a result, we found that higher density with suppressed particle growth and suppression of the formation of coarse particles of MgB4 and MgO were found to be effective in improving the Jc-B characteristics. In the ex situ method, the degradation of MgB2 due to pyrolysis was more severe at temperatures higher than 850 °C. The sample that underwent SPS treatment for a short time at 850 °C showed higher density and less impurity phase in the bulk, which improved the Jc-B properties. In addition, the in situ method showed very minimal impurity with a corresponding improvement in density and Jc-B characteristics for the sample optimized at 750 °C. Microstructural characterization and flux pinning (fP) analysis revealed the possibility of refined MgO inclusions and MgB4 phase as new pinning centers, which greatly contributed to the Jc-B properties. The contributions of the sintering conditions on fP for both synthesis methods were analyzed.