ABSTRACT
A novel sandwich-structured composite was developed from the surface layers of polyhydroxyalkanoate (PHA) and the interlayer of polylactic acid (PLA)/cellulose microfibers (CMF) composite. Moreover, CMF was chemically modified via a sol-gel process to improve the compatibility between the natural reinforcement and the polymer matrix. According to the obtained results, the modified CMF exhibited a highly hydrophobic characteristic (contact angel value of approximately 118°), and they were homogeneously dispersed in the PLA matrix. The results of the thermogravimetric analysis indicated that the sandwich composites reinforced with the modified CMF showed improvement in thermal stability. Regarding the mechanical properties, the incorporation of the natural reinforcement into sandwich composites increased the values of tensile modulus and strength of materials. The water vapor permeability of sandwich composites increased with the addition of untreated fibers; however, the composites reinforced with the modified CMF showed superior barrier performance than that of untreated CMF. In addition, a durability test was performed to determine the effect of accelerated aging on the properties of sandwich composites. The results demonstrated that the mechanical and barrier properties of composites incorporated with untreated CMF decreased after the accelerated aging, whereas the composites reinforced with the modified CMF experienced the least change.
ABSTRACT
Poly(lactic acid) (PLA) is one of the most used biobased and biodegradable polymers. Due to their high stability, some of the newest grades of PLA are only degradable under severe industrial conditions. For these grades, mechanical recycling is a viable end-of-life option, with great environmental advantages. However, the polymer undergoes degradation during its service life and in the melt reprocessing, which leads to a decrease in properties that can compromise the recyclability of PLA. The goal of this work was to evaluate the usefulness of adding small amounts of two organic fillers, chitosan, and silk fibroin nanoparticles, during the recycling process for improving the properties of the recycled plastic. The degradation level of the aged polymer and the nature and amount of filler affect the performance of the recycled plastics. The fillers reduce the degradation during the melt reprocessing of PLA previously subjected to severe hydrolysis, thus increasing the intrinsic viscosity of the recycled plastic. A careful selection of the added organic filler lead to recycled plastics with improvements in some key mechanical, thermal, and barrier properties. Thus, the use of organic fillers represents a cost-effective and environmentally sound way for improving the mechanical recycling of bioplastics.
Subject(s)
Polyesters , Recycling , Plastics , Polymers , ViscosityABSTRACT
In this study, a nanofibrous electrospun substrate based on the silk fibroin (SF) and gelatin (GT) polymers were prepared and evaluated. The SF/GT blended solutions were prepared with various ratios of GT in formic acid and electrospun to obtain bead-free fibers. Results showed that addition of GT to SF increased nanofiber's diameter, bulk hydrophilicity, surface wettability, mass loss percentage, but decreased Young's modulus, tensile strength, and porosity of the SF/GT mats. According to the obtained results, the mat containing 10% of GT was selected as the optimized mat for further studies and loaded with thyme essential oil (TEO) and doxycycline monohydrate (DCMH) as the antibacterial agents. Release studies showed a burst release of TEO from the mat within the first 3 h, while the DCMH had a sustained release during 48 h. In comparison to the TEO-loaded mat, the DCMH-loaded one showed larger inhibition zones against Staphylococcus aureus and Klebsiella pneumoniae bacteria. Meanwhile, cellular studies using mouse fibroblast L929 cells showed excellent cell-compatibility of TEO- and DCMH-loaded mats. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 1092-1103, 2018.
