4D Digital Subtraction Angiography for the Temporal Flow Visualization of Intracranial Aneurysms and Vascular Malformations.

PURPOSE: To assess the benefit and radiation dose of four-dimensional (4D) digital subtraction angiography (DSA) - a time resolved three-dimensional (3D) DSA application - to evaluate the flow and architecture of aneurysms and vascular malformations. METHODS: All patients with cerebrovascular disease were considered who underwent 4D-DSA at our institution between January 2015 and February 2016. For the aneurysm patients, we evaluated the image quality in terms of the visualization of contrast flow in the aneurysm on a 3-point scale (excellent, fair and poor). Interrater agreement between two raters was estimated using Cohen's Kappa statistics. For the shunt disease patients, the additional information obtained from the 4D-DSA was described for each disease. The median radiation dose and volume of contrast medium required for the acquisitions were estimated. RESULTS: A total of 173 patients underwent 4D-DSA; 126 intracranial aneurysms, 10 arteriovenous malformations (AVM), 15 dural arteriovenous fistula (dAVF) and 22 other diseases. For aneurysm patients, excellent and fair visualization of the intra-aneurysmal flow was observed in 27.7%, 72.3%, and excellent (κ = 0.9) agreement between the raters was found. For AVM and dAVF patients, 4D-DSA clarified the complex vasculature by viewing the discrete time phase of contrast filling. Median radiation dose for intracranial lesions was 79.6 mGy for 6s 4D-DSA, and 175 mGy for 12s 4D-DSA. The median amount of contrast medium used was 18.0 ml for 6s 4D-DSA and 21.0 ml for 12s 4D-DSA. CONCLUSIONS: 4D-DSA provided additional information regarding intra-aneurysmal flow and contributed to detect different component of nidus or shunt points.

Evaluation of Balloon Test Occlusion Before Therapeutic Carotid Artery Occlusion: Flat Detector Computed Tomography Cerebral Blood Volume Imaging versus Single-Photon Emission Computed Tomography.

OBJECTIVE: We aimed to compare flat detector computed tomography cerebral blood volume (FD-CBV) imaging to single-photon emission computed tomography (SPECT) as an adjunctive technique during balloon test occlusion (BTO) in patients with intracranial aneurysms or tumors. METHODS: Twelve patients who underwent SPECT (99mTc-ethyl cysteinate dimer) and FD-CBV imaging during BTO were enrolled. Color-coded cerebral blood flow (CBF) images and color-coded FD-CBV images were generated and visually inspected whether there were asymmetries between the ipsilateral and contralateral cerebral hemispheres. Region of interest measurements were performed on the color-coded images at the same locations for both modalities. The mean interhemispheric region of interest ratios were calculated, and the ratio between these were estimated using linear regression models. RESULTS: Ten patients had no symptoms during BTO. Two patients developed subtle but inconclusive neurologic changes approximately 10 minutes after balloon inflation; their images showed asymmetric color-coded images with decreased CBF and FD-CBV in the ipsilateral hemisphere. The mean interhemispheric ratio of CBF was significantly smaller in patients with subtle changes than in those without (0.84 vs. 0.98; P < 0.001). Similarly, the mean interhemispheric ratio of FD-CBV was significantly smaller in patients with subtle changes than in those without (0.88 vs. 1.06; P = 0.01). No patient showed increased CBF or FD-CBV in the ipsilateral hemisphere. CONCLUSIONS: The patients with decreased CBF on SPECT also showed decreased FD-CBV in the ipsilateral hemisphere. FD-CBV imaging may be useful as an adjunctive technique for BTO before potential therapeutic carotid artery occlusion.

Rupture Risk of Small Unruptured Intracranial Aneurysms in Japanese Adults.

Background and Purpose- Therapeutic decision making for small unruptured intracranial aneurysms (<10 mm) is difficult. We aimed to develop a rupture risk model for small intracranial aneurysms in Japanese adults, including clinical, morphological, and hemodynamic parameters. Methods- We analyzed 338 small unruptured aneurysms; 35 ruptured during the observation period, and 303 remained stable. Clinical, morphological, and hemodynamic parameters were considered. Computational fluid dynamics was used to calculate hemodynamic parameters based on computed tomography images of all aneurysms in their unruptured state. Differences between the ruptured and unruptured groups were tested by the Mann-Whitney U or Fisher exact tests. Multivariate logistic regression was applied to obtain a rupture risk model. Its predictive ability was investigated by receiver operating characteristic analysis. Results- The risk model revealed that rupture may be more likely to in younger patients (odds ratio [OR], 0.92 for each age increase of 1 year [95% CI, 0.88-0.96] P<0.001) with multiple aneurysms (OR, 2.58 [95% CI, 1.07-6.19] P=0.03), located at a bifurcation (OR, 5.45 [95% CI, 1.87-15.85] P=0.002), with a bleb (OR, 4.09 [95% CI, 1.42-11.79] P=0.009), larger length (OR, 1.91 for each increase of 1 mm [95% CI, 1.42-2.57] P<0.001), and lower pressure loss coefficient (OR, 0.33 for each decrease of 1 unit [95% CI, 0.14-0.77] P=0.01). The sensitivity, specificity, and area under the curve were 0.800, 0.752, and 0.826 (95% CI, 0.739-0.914) respectively. Conclusions- Younger age, presence of multiple aneurysms, location at a bifurcation, presence of a bleb, larger length, and lower pressure loss coefficient were identified as risk factors for rupture of small intracranial aneurysms. The risk model should be validated in further studies.

Combination of high-resolution cone beam computed tomography and metal artefact reduction software: a new image fusion technique for evaluating intracranial stent apposition after aneurysm treatment.

We introduce a new imaging technique to improve visualisation of stent apposition after endovascular treatment of brain aneurysms employing high-resolution cone beam CT and three-dimensional digital subtraction angiography. After performing a stent-assisted coil embolisation of brain aneurysm, the image datasets were processed with a metal artefact reduction software followed by the automated image fusion programmes. Two patients who underwent aneurysm coiling using a Neuroform stent were evaluated. The reconstructed 3D images showed a detailed structure of the stent struts and identified malappositions of the deployed stents. Case 1 showed good apposition on the outer curvature side of the carotid siphon, while the inner curvature side showed prominent malapposition. Case 2, with multiple aneurysms, showed good apposition on both outer and inner curvature sides, although inward prolapse of the struts was observed. This new imaging technique may help evaluate stent apposition after the endovascular aneurysm treatment.

Accuracy of Length of Virtual Stents in Treatment of Intracranial Wide-Necked Aneurysms.

BACKGROUND AND PURPOSE: Precise stent deployment is important for successful treatment of intracranial aneurysms by stent-assisted coiling (SAC). We evaluated the accuracy of virtual stents generated using commercial stent planning software by comparing the length of virtual and actually deployed intracranial laser cut stents on three-dimensional digital subtraction angiography (3D-DSA) images. METHODS: We retrospectively analyzed the data of 75 consecutive cases of intracranial wide-necked aneurysms treated with the SAC technique using laser cut stents. Based on 3D-DSA images acquired by C-arm CT, stent sizing and placement were intraoperatively simulated by a commercial software application. The difference in length of the stents was estimated by measuring proximal discrepancies between the end points of the virtual and actually deployed stents on fused pre-procedural and post-procedural 3D-DSA images. Discrepancies between distal stent end points were manually minimized. The Kruskal-Wallis test was applied to test whether stent location, type, and length had an effect on difference in length between virtual and real stent. RESULTS: The median difference in length between virtual and real stents was 1.58 mm with interquartile range 1.12-2.12 mm. There was no evidence for an effect of stent location (p = 0.23), stent type (p = 0.33), or stent length (p = 0.53) on difference in length between virtual and real stents. CONCLUSIONS: Stent planning software allows 3D simulation of laser cut stents overlain on 3D-DSA images of vessels and may thus be useful for stent selection and deployment of laser cut stents during stent-assisted coiling of intracranial aneurysms.

Time-resolved magnetic resonance angiography (TR-MRA) for the evaluation of post coiling aneurysms; A quantitative analysis of the residual aneurysm using full-width at half-maximum (FWHM) value.

Magnetic resonance image (MRI) is now widely used for imaging follow-up for post coiling brain aneurysms. However, the accuracy on the estimation of residual aneurysm, which is crucial for the retreatment planning, remains to be controversial. The purpose of this study is to evaluate a new post-processing technique that provides improved estimation of the residual aneurysm after coil embolization. One hundred aneurysms on 93 patients who underwent coil embolization for brain aneurysm were evaluated using the 1.5 Tesla time-resolved magnetic resonance angiography (TR-MRA) one year after the treatment. To minimize the inter-observer variability caused by the window level adjustment, an automatic post processing protocol using the full-width at half-maximum (FWHM) value was utilized. The result was then compared with that from the conventional cerebral angiography. Of the 97 aneurysms that underwent both TR-MRA and DSA, 23 (23.7%) showed residual neck / dome during follow-up. After window level adjustment, the size of the parent artery in the TR-MRA was consistent with that in the DSA. The reconstructed Volume Rendering images provided clear contours of the residual aneurysms and contributed to the understanding the configuration of residual aneurysm. The largest and the smallest diameter of the residual aneurysms was larger in the TR-MRA than in the DSA (8.05 vs. 7.72 mm, p = 0.0004; 4.99 vs. 4.19 mm, p = 0.007 respectively). The sensitivity, specificity, and positive and negative predictive values of TR-MRA compared to DSA were 100%, 97%, 73%, and 100%, respectively. Using the FWHM value to optimize the window level adjustment, the size of the residual component observed in the TR-MRA was larger compared to that in the DSA whereas the size of neck and the parent artery showed consistency between the two modalities. This image processing technique can be used as an effective screening tool for evaluating residual component in post-coiling brain aneurysms.

Hemodynamics and coil distribution with changing coil stiffness and length in intracranial aneurysms.

PURPOSE: The purpose of this study was to investigate hemodynamics and coil distribution with changing coil stiffness and length using the finite element method (FEM) and computational fluid dynamics (CFD) analysis. METHODS: Basic side-wall and bifurcation type aneurysm models were used. Six types of coil models were generated by changing the coil stiffness and length, based on commercially available embolic coils. Coil embolization was simulated using FEM. CFD was performed to characterize the hemodynamics in the aneurysms after embolization. Coil distribution and velocity reduction in the aneurysms were evaluated. RESULTS: The median value of radial coil distribution was shifted from the center to the outer side of the aneurysmal dome by changing coil stiffness: harder coils entered the outer side of the aneurysmal dome more easily. Short coils were more distributed at the neck region, since their small size made it easy for them to enter the tighter area. CFD results also indicated that velocity in the aneurysm was effectively reduced when the coils were more distributed at the neck region and the outer side of the aneurysmal dome because of the disturbance in blood inflow. CONCLUSIONS: It is easier for coils to enter the outer side of the aneurysmal sphere when they are harder. If coils are short, they can enter tighter areas more easily. In addition, high coil density at the outer side of the aneurysmal dome and at the neck region is important to achieve effective velocity reduction.

A new combined parameter predicts re-treatment for coil-embolized aneurysms: a computational fluid dynamics multivariable analysis study.

PURPOSE: Coil embolization is a minimally invasive method used to treat cerebral aneurysms. Although this endovascular treatment has a high success rate, aneurysmal re-treatment due to recanalization remains a major problem of this method. The purpose of this study was to determine a combined parameter that can be useful for predicting aneurysmal re-treatment due to recanalization. METHODS: Patient-specific geometries were used to retrospectively analyze the blood flow for 26 re-treated and 74 non-retreated aneurysms. Post-operatively aneurysms were evaluated at 12-month follow-up. The hemodynamic differences between the re-treatment and non-retreatment aneurysms were analyzed before and after coil embolization using computation fluid dynamics. Basic fluid characteristics, rates of change, morphological factors of aneurysms and patient-specific clinical information were examined. Multivariable analysis and logistic regression analysis were performed to determine a combined parameter-re-treatment predictor (RP). RESULTS: Among examined hemodynamic, morphological, and clinical parameters, slight reduction of blood flow velocity rate in the aneurysm, slight increase of pressure rate at the aneurysmal neck and neck area, and hypertension were the main factors contributing to re-treatment. Notably, hemodynamic parameters between re-treatment and non-retreatment groups before embolization were similar: however, we observed significant differences between the groups in the post-embolization average velocity and the rate of reduction in this velocity in the aneurysmal dome. CONCLUSIONS: The combined parameter, RP, which takes into consideration hemodynamic, morphological, and clinical parameters, accurately predicts aneurysm re-treatment. Calculation of RP before embolization may be able to predict the aneurysms that will require re-treatment.

Effect of catheter positions on hemodynamics and coil formation after coil embolization.

Coil embolization using a micro catheter and coils is one of the most popular surgical methods used for treating intracranial aneurysms. Surgeons need to better understand the effects of changing catheter position because this is under their control during operations. In this study, we simulate coil embolization for a basic bifurcation-type aneurysm using finite element method and computational fluid dynamics. We evaluated the reduction in velocity after embolization and the distance of the embolized coil's center of gravity from the center of the aneurysm (rCG) while changing the catheter tip position. The results show there is a high correlation between velocity reduction and neck volume embolization ratio (NVER) with a correlation coefficient of 0.955, and between the catheter tip position and rCG with a correlation coefficient of 0.866. These results indicate the NVER is also important for effective velocity reduction in both bifurcation-type and sidewall-type aneurysms. In addition, it is useful to set the catheter tip at the bottom of the aneurysms to deploy the first coil as a framing coil.

Relationships between geometrical parameters and mechanical properties for a helical braided flow diverter stent.

BACKGROUND: Although flow diversion is a promising procedure for aneurysm treatment, the safety and efficacy of this strategy have not been sufficiently characterized. Both mechanical properties and flow reduction effects are important factors in the design of an optimal stent. OBJECTIVE: We aimed to clarify the contributions of strut size and pitch to the mechanical properties (radial stiffness and longitudinal flexibility) and geometric characteristics (porosity and pore density) related to flow reduction effects. METHODS: Crimping and bending behaviors of the stents were simulated with the finite element method. The relationships between the mechanical properties and geometric characteristics were investigated by changing the strut size and pitch. RESULTS: Within the porosity range of 79-82%, the radial stiffness of the stent was similarly influenced by either the strut size or pitch. However, the longitudinal flexibility tended to be influenced more by strut size than by pitch. CONCLUSIONS: Adjusting the strut size rather than the pitch can change the mechanical properties while minimizing the change in porosity or pore density related to flow reduction effects.

Variability of hemodynamic parameters using the common viscosity assumption in a computational fluid dynamics analysis of intracranial aneurysms.

BACKGROUND: In most simulations of intracranial aneurysm hemodynamics, blood is assumed to be a Newtonian fluid. However, it is a non-Newtonian fluid, and its viscosity profile differs among individuals. Therefore, the common viscosity assumption may not be valid for all patients. OBJECTIVE: This study aims to test the suitability of the common viscosity assumption. METHODS: Blood viscosity datasets were obtained from two healthy volunteers. Three simulations were performed for three different-sized aneurysms, two using measured value-based non-Newtonian models and one using a Newtonian model. The parameters proposed to predict an aneurysmal rupture obtained using the non-Newtonian models were compared with those obtained using the Newtonian model. RESULTS: The largest difference (25%) in the normalized wall shear stress (NWSS) was observed in the smallest aneurysm. Comparing the difference ratio to the NWSS with the Newtonian model between the two Non-Newtonian models, the difference of the ratio was 17.3%. CONCLUSIONS: Irrespective of the aneurysmal size, computational fluid dynamics simulations with either the common Newtonian or non-Newtonian viscosity assumption could lead to values different from those of the patient-specific viscosity model for hemodynamic parameters such as NWSS.

Selection of helical braided flow diverter stents based on hemodynamic performance and mechanical properties.

BACKGROUND: Although flow diversion is a promising procedure for the treatment of aneurysms, complications have been reported and it remains poorly understood. The occurrence of adverse outcomes is known to depend on both the mechanical properties and flow reduction effects of the flow diverter stent. OBJECTIVE: To clarify the possibility of designing a flow diverter stent considering both hemodynamic performance and mechanical properties. MATERIALS AND METHODS: Computational fluid dynamics (CFD) simulations were conducted based on an ideal aneurysm model with flow diverters. Structural analyses of two flow diverter models exhibiting similar flow reduction effects were performed, and the radial stiffness and longitudinal flexibility were compared. RESULTS: In CFD simulations, two stents-Pore2-d35 (26.77° weave angle when fully expanded, 35 µm wire thickness) and Pore3-d50 (36.65°, 50 µm respectively)-demonstrated similar flow reduction rates (68.5% spatial-averaged velocity reduction rate, 85.0% area-averaged wall shear stress reduction rate for Pore2-d35, and 68.6%, 85.4%, respectively, for Pore3-d50). However, Pore3-d50 exhibited greater radial stiffness than Pore2-d35 (40.0 vs 21.0 mN/m at a 3.5 mm outer diameter) and less longitudinal flexibility (0.903 vs 0.104 N·mm bending moments at 90°). These measurements indicate that changing the wire thickness and weave angle allows adjustment of the mechanical properties while maintaining the same degree of flow reduction effects. CONCLUSIONS: The combination of CFD and structural analysis can provide promising solutions for an optimized stent. Stents exhibiting different mechanical properties but the same flow reduction effects could be designed by varying both the weave angle and wire thickness.

Computational fluid dynamics analysis of tandem carotid artery stenoses: Investigation of neurological complications after carotid artery stenting.

BACKGROUND: Combined extra- and intracranial carotid artery stenoses, particularly involving multiple lesions, show complex hemodynamic properties and represent a therapeutic dilemma. We used computational fluid dynamics (CFD) to investigate whether insufficient cerebral blood flow (CBF) in a 70-year-old man with tandem stenoses was the cause of aphasia and right hemiparesis after carotid artery stenting (CAS) of the extracranial stenosis. METHOD: Three-dimensional digital subtraction angiography (3D-DSA) was performed before and after balloon angioplasty and CAS in the patient. The geometrical and rheological conditions of the carotid arteries were determined, and computational meshes were generated from the patient-specific 3D-DSA datasets. CFD analysis was performed, and hemodynamic parameters such as mass flow, pressure, fractional flow reserve, and streamlines were calculated. RESULTS: Post-CAS simulations showed that the percentage of internal carotid artery mass flow from common carotid artery mass flow increased from 9% to 14% and CBF improved by only 5%. CONCLUSIONS: CFD analysis suggested that the neurological complications were caused by insufficient CBF rather than embolic events, and in tandem carotid stenoses, CAS for an extracranial lesion alone may not always sufficiently increase CBF. CFD enabled the noninvasive quantitative estimation of the effects of CAS of each stenotic segment on carotid flow.

Dose reduction in cone-beam CT scanning for intracranial stent deployment before coil embolization of intracranial wide-neck aneurysms.

PURPOSE: Flat panel detector (FD)-equipped angiography machines are increasingly used for neuro-angiographic imaging. During intracranial stent-assisted coil embolization procedures, it is very important to clearly and quickly visualize stent shape after deployment in the vessel. It is necessary to quickly visualize stents by cone-beam computed tomography (CBCT). The aim of this study was to compare CBCTs at 10 and 20 s, and to confirm that this method is useful for neuro-endovascular treatment procedures. MATERIALS AND METHODS: We treated 30 patients with wide-necked intracranial aneurysms with a flexible, self-expanding neurovascular stent and subsequent aneurysm embolization with platinum micro-coils. We performed the CBCT after stent deployment. We compared the 10 s and 20 s CBCTs, using the full width one-half maximum (FWHM) visualization. RESULTS: Accurate stent placement with subsequent coil occlusion of the aneurysms was feasible in all patients. Stent struts were clearly visualized on both 10 s and 20 s CBCTs. Importantly, 10 s CBCT can reduce the radiation dose by about 42%, compared with 20 s CBCT. Performing 10 s CBCT with a 14% dilution of the contrast medium may significantly improve image acquisition during stent-assisted coil embolization. CONCLUSIONS: Reduced-dose, 10 s CBCT can visualize stents in clinical cases, while significantly reducing radiation exposure.

Verification of a research prototype for hemodynamic analysis of cerebral aneurysms.

Owing to its clinical importance, there has been a growing body of research on understanding the hemodynamics of cerebral aneurysms. Traditionally, this work has been performed using general-purpose, state-of-the-art commercial solvers. This has meant requiring engineering expertise for making appropriate choices on the geometric discretization, time-step selection, choice of boundary conditions etc. Recently, a CFD research prototype has been developed (Siemens Healthcare GmbH, Prototype - not for diagnostic use) for end-to-end analysis of aneurysm hemodynamics. This prototype enables anatomical model preparation, hemodynamic computations, advanced visualizations and quantitative analysis capabilities. In this study, we investigate the accuracy of the hemodynamic solver in the prototype against a commercially available CFD solver ANSYS CFX 16.0 (ANSYS Inc., Canonsburg, PA, www.ansys.com) retrospectively on a sample of twenty patient-derived aneurysm models, and show good agreement of hemodynamic parameters of interest.

Hemodynamic effects from coil distribution with realistic coil models in an aneurysm.

Because of its minimal invasiveness, coil embolization has become a popular way to treat aneurysms. The main problem with this method, however, is the poor understanding of the hemodynamics in the aneurysm after coil embolization. To improve this situation, we used a finite element method and computational fluid dynamics to investigate how hemodynamic parameters depend on the spatial distribution of coils. A basic model of an internal carotid artery aneurysm was created, and six realistic coil models were considered for the coil geometry. The material properties of the coils were based on the commercially available embolic coil Target 360 series. The results showed that the reduction in blood velocity in aneurysms was closely related to coil distribution. In addition, the coil volume in the neck region and the density of coils near the aneurysmal wall were further important factors for reducing the velocity. Considering the coil distribution may help to prevent aneurysmal recanalization.