Ethylenedioxythiophene-Based Small Molecular Donor with Multiple Conformation Locks for Organic Solar Cells with Efficiency of 19.3 .

Ternary organic solar cells (T-OSCs) represent an efficient strategy for enhancing the performance of OSCs. Presently, the majority of high-performance T-OSCs incorporates well-established Y-acceptors or donor polymers as the third component. In this study, a novel class of conjugated small molecules has been introduced as the third component, demonstrating exceptional photovoltaic performance in T-OSCs. This innovative molecule comprises ethylenedioxythiophene (EDOT) bridge and 3-ethylrhodanine as the end group, with the EDOT unit facilitating the creation of multiple conformation locks. Consequently, the EDOT-based molecule exhibits two-dimensional charge transport, distinguishing it from the thiophene-bridged small molecule, which displays fewer conformation locks and provides one-dimensional charge transport. Furthermore, the robust electron-donating nature of EDOT imparts the small molecule with cascade energy levels relative to the electron donor and acceptor. As a result, OSCs incorporating the EDOT-based small molecule as the third component demonstrate enhanced mobilities, yielding a remarkable efficiency of 19.3 %, surpassing the efficiency of 18.7 % observed for OSCs incorporating thiophene-based small molecule as the third component. The investigations in this study underscore the excellence of EDOT as a building block for constructing conjugated materials with multiple conformation locks and high charge carrier mobilities, thereby contributing to elevated photovoltaic performance in OSCs.

Amine-releasable Mediator In situ Repair Perovskites for Efficient and Stable Perovskite Solar Cells.

Residual lead iodide (PbI2) is deemed to a double-edged sword in perovskite film as small amounts of PbI2 are beneficial to the photovoltaic performance, but excessive will cause degradation of photovoltaic performance and stability. Herein, an in situ repair strategy has been developed by introducing amine-releasable mediator (methylammonium pyridine-2-carboxylic, MAPyA) to eliminate over-residual PbI2 and regulate the crystal quality of perovskite film. Notably, MAPyA can be partially decomposed into methylamine (MA) gas and pyridine-2-carboxylic (PyA) during high temperature annealing. The released MA can locally form liquid intermediate phase, facilitating the reconstruction of perovskite microcrystals and residual PbI2. Moreover, the leftover PyA is confirmed to effectively passivate the uncoordinated lead ions in final perovskite film. Based upon this, superior perovskite film with optimized crystal structure and holistic negligible PbI2 is acquired. The assembled device realizes outstanding efficiency of 24.06 %, and exhibits a remarkable operational stability that maintaining 87 % of its origin efficiency after continuous illumination for 1480 h. And the unencapsulated MAPyA-treated devices present significant uplift in humidity stability (maintaining ~93 % of the initial efficiency over 1500 h, 50-60 % relative humidity). Furthermore, the further optimization of this strategy with nanoimprint technology proves its superiority in the amplificative preparation for perovskite films.

Ultra-flexible and waterproof perovskite photovoltaics for washable power source applications.

A washable perovskite solar cell with high efficiency (over 11%) and outstanding crumpling durability (maintaining 81.2% after 100 cycles crumpling) is demonstrated herein by combining the flexible self-encapsulation method with a waterproof glue coated substrate.

Ionic Liquid-Induced Ostwald Ripening Effect for Efficient and Stable Tin-Based Perovskite Solar Cells.

Tin-based perovskite solar cells (PVSCs) are regarded as the most promising alternative among lead-free PVSCs. However, the rapid crystallization for tin-based perovskite tends to cause inferior film morphology and abundant defect states, which make poor photovoltaic performance. Here, 1-butyl-3-methylimidazolium bromide (BMIBr) ionic liquids (ILs) with strong polarity and a low melting point are first employed to produce the Ostwald ripening effect and obtain high-quality tin-based perovskite films with a large grain size. Meanwhile, the non-radiative recombination ascribed from defect states can also be effectively reduced for BMIBr-treated perovskite films. Consequently, a photoelectric conversion efficiency (PCE) of 10.09% for inverted tin-based PVSCs is attained by the Ostwald ripening effect. Moreover, the unencapsulated devices with BMIBr retain near 85% of the original PCE in a N2 glovebox beyond 1200 h and about 40% of the original PCE after exposure to air for 48 h.

Understanding the Mechanism between Antisolvent Dripping and Additive Doping Strategies on the Passivation Effects in Perovskite Solar Cells.

Perovskite polycrystalline films contain numerous intrinsic and interfacial defects ascribed to the solution preparation process, which are harmful to both the photovoltaic performance and the stability of perovskite solar cells (PVSCs). Although various passivators have been proved to be promising materials for passivating perovskite films, there is still a lack of deeper understanding of the effectiveness of the different passivation methods. Here, the mechanism between antisolvent dripping and additive doping strategies on the passivation effects in PVSCs is systematically investigated with a nonfullerene small molecule (F8IC). Such a passivated effect of F8IC is realized via coordination interactions between the carbonyl (C═O) and nitrile (C-N) groups of F8IC with Pb2+ ion of MAPbI3. Interestingly, F8IC antisolvent dripping can effectively passivate the surface defects and thus inhibit the nonradiative charge recombination on the upper part of the perovskite layer, whereas F8IC additive doping significantly reduces the surface and bulk defects and produces a compact perovskite film with denser crystal grains, thus facilitating charge transmission and extraction. Therefore, these benefits are translated into significant improvements in the short-circuit current density (Jsc) to 21.86 mA cm-2 and a champion power conversion efficiency of 18.40%. The selection of an optimal passivation strategy should also be considered according to the energy level matching between the passivators and the perovskite. The large energetic disparity is unsuitable for additive doping, whereas it is expected in antisolvent dripping.

A CuO-CeO2 composite prepared by calcination of a bimetallic metal-organic framework for use in an enzyme-free electrochemical inhibition assay for malathion.

An enzyme-free electrochemical method is described for the determination of trace levels of malathion. It is based on a nanostructured copper-cerium oxide (CuO-CeO2) composite prepared by calcination of a Cu(II)/Ce(III) metal-organic framework. The morphology, crystal structure and elemental composition of composite was studied by scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray diffraction and X-ray photoelectron spectroscopy. The principle for malathion determination is based on the fact that the redox signal of CuO (best measured at around -0.1 V vs. SCE) (at 100 mV/s) is inhibited by malathion due to affinity between CuO and the sulfur groups of malathion. The introduction of CeO2 into the composite system further improves the analytical performance. This is attributed to the unique microstructure and the synergistic effect between CuO and CeO2. Experimental parameters like solution pH value, Cu/Ce molar ratio, accumulation potential, accumulation time, and CuO-CeO2 volume on the electrode were optimized. The assay has a linear range of 10 fM to 100 nM and a 3.3 fM detection limit (at S/N = 3). The electrode is selectively inhibited by malathion even in the presence of potentially interfering substances. Graphical abstract A sensitive and effective enzyme-free electrochemical sensor has been developed for the detection of malathion based on CuO-CeO2 composite derived from bimetallic metal-organic frameworks.

Ratiometric electrochemical sensor for sensitive detection of sunset yellow based on three-dimensional polyethyleneimine functionalized reduced graphene oxide aerogels@Au nanoparticles/SH-ß-cyclodextrin.

Electrochemical methods have been deemed effective strategies for the detection of dye additive sunset yellow (SY) owing to their low cost, good stability, and high sensitivity. However, the application of the existing sensors with single electrical signal response is limited by their inadequate sensitivity and large background interference. Herein, a ratiometric electrochemical strategy with a dual signal was developed to detect SY. The strategy had an intrinsic built-in correction to the effects from the system, and thus reduced the influence of environmental change. 3D polyethyleneimine functionalized reduced graphene oxide aerogels@Au nanoparticles/SH-ß-cyclodextrin (PEI-rGAs@AuNPs/SH-ß-CD) was used as the sensing material due to its 3D macroporous microstructure with high specific surface area and excellent electronic conductivity. Guest molecule methylene blue (MB) was chosen as a probe molecule, which formed an inclusion host-guest complex with a SH-ß-CD host in advance. The target molecule SY displaced MB from the CD cavities, resulting in the decrease of MB current and the increase of SY current. With the logarithmic value of ISY/IMB as the readout signal, the detection limit of the developed ratiometric electrochemical sensor reached as low as 0.3 nM, confirming the excellent sensitivity. Furthermore, this strategy exhibited good selectivity and repeatability, and could be used for the detection of SY in a real sample.

Sensitive determination of nitrite by using an electrode modified with hierarchical three-dimensional tungsten disulfide and reduced graphene oxide aerogel.

Nanosheets of tungsten disulfide (WS2) were used to improve the physicochemical properties of reduced graphene oxide aerogel (rGA). The nanosheets were directly integrated into 3D hybrid architecture of rGA by a solvothermal mixing method by which the WS2 sheets were assembled onto the conductive graphene network. WS2 with highly exfoliated and defect-rich structure made the WS2/rGA composite possess plentiful active sites, and this enhanced the electrocatalytic capability of the composite. The introduction of poorly conductive WS2 into 3D rGA system decreases the background current of rGA when used as electrode material. This is advantageous in terms of signal to-noise ratio and analytical performance in general. The WS2/rGA electrode, best operated at a potential of 0.68 V (vs. SCE) has a linear response in the 0.01 to 130 µM nitrite concentration range with a low detection limit of 3 nM (at S/N = 3). It is selective, reproducible, stable and is successfully applied to the determination of nitrite in spiked bacon samples. Graphical Abstract Schematic presentation of an electrochemically modified electrode for the detection of nitrite based on 3D tungsten disulfide/reduced graphene oxide aerogel (WS2/rGA).

Controllable synthesis of three-dimensional nitrogen-doped hierarchical porous carbon and its application in the detection of lead.

In this study, gelatin-based microcapsules were first proposed as a carbon source for the synthesis of nitrogen-doped hierarchical porous carbon (N-HPC) via a facile one-pot high-temperature treatment. The morphologies of the microcapsules could be well controlled by adjusting the synthesis parameters; this ensured the repeatability of the calcined products. The as-prepared N-HPC possesses a favorable three-dimensional network structure and hierarchical porous structure. As a promising modified electrode, N-HPC displayed remarkably improved stability and sensitivity for lead ion (Pb2+) detection. Moreover, two factors are responsible for the good analytical performance: (i) the morphologies of the microcapsules are controllable and reproducible; this improves the detection stability; and (ii) the nitrogen atoms in the shells of the microcapsules can efficiently interact with Pb2+; this enhances the detection sensitivity. The influences of various experimental parameters, including the pH value of the supporting electrolyte, deposition potential and deposition time, on the stripping signal of Pb2+ were investigated. The method displayed a wide linear range of the Pb2+ concentration from 7 nM to 7000 nM with the detection limit of 1.44 nM under the optimized conditions. The modified electrode possessed high selectivity, which might be due to the high binding affinity of the NH2 - groups to Pb2+. The developed method has been successfully applied to the detection of Pb2+ in actual water samples; this demonstrates that the N-HPC-based electrochemical sensors have prospective applications in the environmental monitoring of Pb2+.

The Semiflexible Polymer Translocation into Laterally Unbounded Region between Two Parallel Flat Membranes.

Using the dynamic Monte Carlo method, we investigate dynamics of semiflexible polymer translocation through a nanopore into laterally unbounded region between two parallel flat membranes with separation R in presence of an electric field inside the pore. The average translocation time τ initially decreases rapidly with increase of R in the range of R < 10 and then almost keeps constant for R ≥ 10, and the decline range increases with increase of dimensionless bending stiffness κ. We mainly study the effect of chain length N, κ and electric field strength E on the translocation process for R = 5. The translocation dynamics is significantly altered in comparison to an unconfined environment. We find τ ~ Nα, where the exponent α increases with increase of E for small κ. α initially increases slowly with increase of E and then keeps constant for moderate κ. α decreases with increase of E for large κ. However, α decreases with increase of κ under various E. In addition, we find τ ~ κß. ß decreases with increase of N under various E. These behaviors are interpreted in terms of the probability distribution of translocation time and the waiting time of an individual monomer segment passing through the pore during translocation.

Fine encapsulation of dual-particle electronic ink by incorporating block copolymer for electrophoretic display application.

The design of the oppositely charged ink particles based on titanium dioxide and carbon black for the monochrome electrophoretic display (EPD) was reported. The white ink particles with acidic surface and black ink particles with basic surface were synthesized and sterically stabilized by long alkyl chains, which were charged oppositely by mixing with basic surfactant (OLOA 1200) and acidic surfactant (Span 80), respectively. The electrophoretic mobility and the Zeta potential were -3.87×10(-10)m(2)V(-1)s(-1) and -25.1 mV for the white ink particles, 3.79×10(-10)m(2)V(-1)s(-1) and 24.6 mV for the black ink particles. In addition, the block copolymer, poly(lauryl methacrylate)-b-poly(2-(dimethylamino)ethyl methacrylate) (PLMA-b-PDMAEMA) synthesized by atom transfer radical polymerization (ATRP), was first incorporated in the modification of the pigments for the fine encapsulation. Then, a stable dual-particle electronic ink with contrast ratio of 120:1 was prepared and encapsulated with the gelatin (GE)/sodium carboxymethylcellulose (NaCMC)/sodium dodecyl sulfate (SDS) microcapsules by complex coacervation method. Finally, the matrix character display prototype driven at a low voltage exhibited excellent performance, the contrast ratio of which was 8:1 at 9 V DC.