Upper Critical Solution Temperature Behavior of pH-Responsive Amphoteric Statistical Copolymers in Aqueous Solutions.

Amphoteric statistical equivalent copolymers (P(2VP/NaSS) n ) composed of 2-vinylpyridine (2VP) and anionic sodium p-styrenesulfonate (NaSS) were prepared via reversible addition-fragmentation chain transfer polymerization. The degrees of polymerization (n) were 19 and 95. The monomer reactivity ratio, time conversion profile, and 1H nuclear magnetic resonance diffusion-ordered spectra suggested that the copolymerization of 2VP and NaSS provided statistical or near to random copolymers. P(2VP/NaSS) n exhibited an upper critical solution temperature (UCST) in acidic aqueous solutions on the basis of the charge interactions between the protonated cationic 2VP and anionic NaSS units. With an increase in pH value, the interaction was weakened because of the deprotonation of the 2VP units, thus reducing the UCST. At high [NaCl], the electrostatic interactions among the polymers were weakened because of the screening effect, and again, the UCST was reduced. With an increase in polymer concentration, the intra- and interpolymer interactions increased because of some entanglement, and the UCST consequently increased. Electrostatic interactions among the polymer chains with high molecular weight occurred easier than those among the low-molecular-weight polymer chains, which increased the UCST. The UCST also increased when deuterium oxide was used instead of hydrogen oxide, which was due to the isotopic effect. Hence, the UCST of P(2VP/NaSS) n can be adjusted according to the desired application.

Disposable paper-based electrochemical sensor using thiol-terminated poly(2-methacryloyloxyethyl phosphorylcholine) for the label-free detection of C-reactive protein.

A paper-based electrochemical sensor is described that is based on the use of thiol-terminated poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC-SH) that was self-assembled on a gold nanoparticle-modified screen-printed electrode (SPE). The SPE sensor was used for label-free detection of C-reactive protein (CRP). Gold nanoparticles (AuNPs) were first electrodeposited on the SPCE, followed by the self-assembly of PMPC-SH on gold. The electrochemical response of the modified SPE to CRP was measured by differential pulse voltammetry (DPV). If the CRP on the paper device is contacted with Ca (II) ions, the current (measured by using hexacyanoferrate as the electrochemical probe) decreases. The signal drops in the 5 to 5000 ng·mL-1 CRP concentration range, and the lower detection limit (at 3 SD/slope) is 1.6 ng·mL-1. The use of a PMPC-modified surface also reduces the nonspecific adsorption of proteins. The sensor is not interfered by bilirubin, myoglobin and albumin. It was successfully applied to CRP detection in certified human serum. This sensor is applicable as an attractive protocol for an inexpensive, highly sensitive, and disposable material for electrochemical detection of CRP. Graphical abstract Schematic presentation of highly sensitive and disposable paper-based electrochemical sensor using thiol-terminated poly(2-methacryloyloxyethyl phosphorylcholine) in the presence of Ca2+ for the label-free C-reactive protein detection. The current was measured by differential pulse voltammetry.

Surface-immobilized plant-derived osteopontin as an effective platform to promote osteoblast adhesion and differentiation.

In this report, recombinant human osteopontin synthesized in tobacco plants (p-rhOPN) is introduced as a potential bioactive molecule that can promote osteoblast adhesion and differentiation. A glass substrate (SiO2/Si-OH) grafted with poly(acrylic acid) (SiO2/Si-PAA) was prepared by surface-initiated reversible addition-fragmentation chain transfer polymerization and used as a carboxyl-rich platform for the chemical conjugation of p-rhOPN. The PAA grafting and subsequent p-rhOPN immobilization were confirmed by water contact angle, Fourier transform-infrared spectroscopy, X-ray photoelectron spectroscopy and atomic force microscopy analyses. Indirect ELISA quantification revealed that the p-rhOPN immobilization efficiency was above 95% and the surface coverage was a function of the p-rhOPN concentration. MC-3T3-E1 cells cultured on the SiO2/Si-PAA substrate immobilized with various concentrations (0.6-30 ng/mL) of p-rhOPN (SiO2/Si-p-rhOPN) exhibited superior cell spreading compared to those cultured on SiO2/Si-OH or gelatin-modified glass substrate (SiO2/Si-gelatin). Polymerase chain reaction analysis indicated that the SiO2/Si-p-rhOPN substrates with high level of immobilized p-rhOPN promoted MC-3T3-E1 cell differentiation, as demonstrated by the higher transcript expression levels of the osteogenic differentiation regulatory gene, Runt-related transcription factor 2, compared to cells cultured on SiO2/Si-OH or SiO2/Si-gelatin. Given that p-rhOPN can be more economically produced than the commercially available OPN derived from human or mammalian sources, then, together with its well-preserved biological function in spite of being chemically conjugated to the substrates, it is likely that p-rhOPN could be more broadly applied for the development of materials for bone tissue engineering with a promising medical and commercial value.